Atlas Copco DML LP Drill Rig Parts List – Serial 8400 PDF Catalog

Description

Atlas Copco DML LP Parts List – Serial 8400

This is the factory parts catalog built specifically for the Atlas Copco DML LP drill rig carrying Serial Number 8400. Every illustrated figure, part number, reference number, and quantity in the book is tied to that one machine, so the parts you order from these pages are the parts that belong on this rig. If you maintain, rebuild, or resell an Atlas Copco DML LP drill, having the correct serial-matched parts list is the difference between a first-time-fit repair and a returned part.

The catalog is organized into major assemblies, each with its own illustration and parts breakdown: frame and chassis, undercarriage/tracks, jacks, cab and console, derrick/tower, powerpack/engine, air cleaners, fuel system, compressor/air system, hydraulic system, electrical system, options, and tools/accessories. Each figure is followed by a reference table listing the reference number, part number, quantity, unit of measure, and description – exactly the format Atlas Copco parts counters use.

File Details

• Manual type: Illustrated Parts List / Parts Catalog
• Brand: Atlas Copco
• Model: DML LP
• Serial number: 8400
• Language: English
• File format: PDF
• Page count: 638 pages
• Engine package: QSX15 600HP
• Publisher: Atlas Copco Drilling Solutions, Inc.

Chapters Covered

The Atlas Copco DML LP parts list for Serial 8400 is broken into the following assembly groups, each supported by exploded illustrations and reference tables:

• Frame / Chassis – main frame weldment, deck assembly, crossheads, tower support, brackets, plates
• Decking – side, rear, and front decking, handrails, ladders, rear platform assembly
• Undercarriage / Tracks – track assembly, LH/RH frames, idlers, final drives, sprockets, track chain
• Jacks – rear jack assembly, front jack assembly, hydraulic cylinder, counterbalance valve, seal kits
• Cab / Console – bare cab, doors (curb side and tower side), air conditioner assembly, heater, gauges and controls
• Derrick / Tower – tower commons, 30FT tower assembly, tower weldment, pivot blocks, tower piping, rotary head, rod changer
• Powerpack / Engine – QSX15 600HP engine assembly, engine wiring, cooler assembly, radiator piping, exhaust installation, CAC piping
• Air Cleaners – air cleaner assembly, air filter
• Fuel System – 380-gallon fuel tank and piping, fuel cooler
• Compressor / Air System – XL1600 compressor assembly, airend, compressor control piping, blowdown valve, oil filter, receiver tank, upper/lower manifolds
• Hydraulic System – main hydraulic drive, double hydraulic pump, pump drive, main hydraulic piping, diverter valve, pulldown, torque limiter, regeneration valve, hydraulic tank, filters, fan/HOC piping
• Rod Changer Piping – 30′ rod changer piping
• Propel Piping – IR-DML propel circuit
• Tower Piping – tower commons piping
• Breakout – sliding breakout assembly and split flange cylinder
• Jacks Piping – electric jack piping
• Jib Boom – DMC tower jib boom
• Overpressure Controls – overpressure control circuit
• Rod Index Piping – electric rod index piping
• Tower Raise Cylinder and Piping – tower raise cylinder and piping
• Tower Pinning – DMC/electric tower pinning
• Valve Installations – 6-spool valve installation, 6-spool valve assembly, VPL6 valve assembly, 9-spool valve installation
• Wrench Cylinder – electric wrench cylinder installation and seal kit
• Lights – night light package (9-light)
• Electrical System – QSX wiring diagram, standard electric rig wiring, basic electric wiring
• Options – water injection (300G/8GPM electric), dust collector (DML/4500), fire suppression, dust curtain assembly, battery installation (4-battery), thread greaser, air regulator, jack-up indicator, Centro lube system, inclinometer, rod seal, rod support, hydraulic fill pump
• Tools / Accessories – common decals, safety decals (Spanish), Spanish safety manual, lifting hooks, export package, rear platform modification, field filter kit, paint and supplies, rod tools, chain wrench, tong assembly, chain assembly, blow gun

What this parts list gives you is direct identification. Instead of guessing at a part number or matching by photo, you open the correct assembly figure, find the reference number, and read the row in the table below it. The catalog covers the entire DML LP rig as shipped under Serial 8400 – from the undercarriage and tower down to the fasteners, seals, O-rings, and clamps that hold the hydraulics and air system together. Sub-assemblies such as the hydraulic cylinders, drive final, idler, air end, dust collector motor, and air conditioner coil are broken down to their internal components, so you can order not just a replacement cylinder but the specific seal kit, rod, piston, head, or port plug inside it.

Serial-Number-Specific Coverage

Every page in this book carries the header Serial Number: 8400 / FAMILY, DML LP. Atlas Copco builds a separate parts book for each drill as it is configured at the factory, and this is the one that belongs with Serial 8400. Options such as the 30FT tower, the QSX15 600HP engine, the XL1600 compressor, the rod changer, the dust collector, the fire suppression system, and the night light package are all documented as they apply to this exact machine. Using a different serial’s parts book risks pulling a part number that looks close but does not fit.

How the Catalog Is Organized

Each section opens with a figure number and a title (for example, Figure 1: Frame, Main Assembly, DML). An exploded pictorial drawing shows every item with a callout number. The facing page or the page after it presents a table with columns for Reference number, Part Number, Quantity, Unit, and Description. Assemblies that contain sub-assemblies point you to the next figure (for example, “(See figure 2)” under the main frame line). When you need a seal kit for the rear jack, you find “KIT,SEAL,VALVE” listed under the jack assembly, then flip to Figure 25 for the component list. That cross-referencing is what makes the catalog usable at the service bench.

Who This Parts List Is For

This Atlas Copco DML LP parts list suits field service technicians, workshop mechanics, parts managers, and owners of Serial 8400 DML LP drills who need to order replacement components. It is equally useful for rebuilders and resellers who want to verify that a rig is complete and equipped with the correct option packages, and for anyone documenting a used machine for resale. If you are chasing a hydraulic leak, a failed final drive, a damaged jack, a worn track chain, an air-end problem, or a broken piece of cab or decking, having the illustrated parts breakdown with the correct part numbers in front of you eliminates the back-and-forth with the parts counter.

Get the Correct Part the First Time

With this Atlas Copco DML LP drill rig parts list for Serial 8400 open on your bench, you can identify assemblies, sub-assemblies, and individual components by figure and reference number; confirm the exact part number and quantity before ordering; trace a component through its parent assembly to understand how it comes apart; and cross-reference seal kits, gaskets, O-rings, fasteners, hoses, valves, pumps, and cylinders directly from the source document.

Ordering by guesswork costs time, freight, and a second repair attempt. Correct Atlas Copco part identification matters on a drill of this size because the alternative is a rig sitting idle. This catalog puts the exact part number, quantity, and unit of measure in front of you for the machine you actually own.

IMAGES PREVIEW

Delivery is instant – a PDF you download immediately after checkout, with no shipping and no waiting on a printed book. Open it on a laptop in the shop, a tablet at the rig, or a phone in the field, and print the pages you need without worrying about oil and grease on the original.