Atlas Copco PV271D RCS Pit Viper Parts List Manual – Serial US004704 PDF

Description

The Atlas Copco PV271D RCS Parts List Manual is the complete illustrated parts catalog for the Pit Viper PV271D RCS rotary drill rig carrying serial number US004704. Every assembly drawing and parts table in this 1,036-page document was compiled specifically for this serial number – not a generic multi-machine compilation. That means the part numbers, reference numbers, quantities and assembly breakdowns you find here are the exact ones that belong to this machine as it was built.

If you maintain, repair or rebuild a PV271D RCS, working from the wrong parts book wastes time and money. A part that looks correct on a generic diagram may have a different number on your rig, and a sub-assembly that appears identical may use different hardware. This parts list removes that risk. It covers the full machine from the mainframe and undercarriage through the tower, powerhead, rod handling system, C27 powerpack, air system, hydraulic system, electrical system, cab and every factory option installed on serial US004704.

File Details

• Manual Type: Illustrated Parts List / Parts Catalog
• Brand: Atlas Copco
• Model: PV271D RCS (Pit Viper)
• Serial Number: US004704
• Language: English
• File Format: PDF
• Page Count: 1,036 pages

Chapters Covered

• Preventive Maintenance – fluids and lubricants; 250-hour, 500-hour, 1,000-hour and 2,000-hour CAT PM kits
• Frame – mainframe weldment, tower support installation and weldment, trunnion block, tower support assembly, hydraulic cylinder and seal kit, dual tower rest, decking installations (PV270D, rear, cab access, tower 55 ft, webforge, HIAB crane), walkways, stairways (access, VHS Hedweld, tower access, emergency), ladders, cooler access, tow bar
• Undercarriage – CAT345XL 20-inch tracks, CAT345XL undercarriage, upper roller group, single and double flange roller groups, adjustment group, front idler
• Jacks – four-jack RCS installation for PV270, jack assembly, hydraulic jack cylinders
• Cab/Console – XIR glass cab RCS4, RCS cab, cabin commons, rear and side door assemblies, base assembly, control panel assembly, console assembly, wiper assemblies for DE/DRILL/NDE windows, front and rear headliners, access door, washer hose, seat assembly PV230, suspension MSG97AL-01, RCS-L control assembly, XIR glass installation, RCS4 control assembly PV270, display mount, RESPA external and recirculation installations, DTH lube cab installation, nameplates, A/C heater hose, A/C installation diesel, A/C manifold, secondary A/C unit, buddy/trainee seat, outside shade assembly
• Tower – tower weldment PV-271, pivot block, 55 ft feed system, sheave assembly and hub/rings, sheave carriage assembly, screw jack service kit, cable tension cylinder, hydraulic feed cylinder PV271, cylinder seal kit, guide block assembly, powerhead mounting group, powerhead with lube pump, machined housing PV270, spindle clamp, flow control valve, motor control valve, spindle 7.63 x 5.25 BECO, carousel 7.63 x 5.25 BECO, rod guide assembly 7-5/8 inch, wrench assembly 7 to 7-5/8, rod changer carousel, rod catcher installations (standard and hydraulic), rod support assembly, breakout base assembly, main winch and 8,000 lb winch, tower raise cylinders, tower piping PV-271, cable tension valve assembly, tower locking, angle locking piping
• Powerpack/Engine – engine assembly PV270 T2 CAT with clutch, C27 800 HP Tier 2 engine, prelube for C27/C32, remote prelube, powerpack base and mounting C27, 260 amp CAT alternator, battery box, battery isolation switch, exhaust assembly, radiator piping, clutch installation and compressor assembly, clutch oil tank, cooler installation PV270 RCS, generic cooler, CAC assembly PV271, CAC support rod, CAC piping, driveshaft guard, vent tube installation Tier 2
• Air Cleaners – air cleaner assembly T4 with clutch, air cleaner 50616010, air cleaner assembly 57982779, air filter-08, air cleaner assembly 1900 with clutch, centrifugal filter CAT
• Fuel System – 612-gallon fuel tank with Hydrauflo and RCS, 350-gallon fuel tank, 262-gallon fuel tank, CAT T2 fuel piping, ether installation CAT LBH, ether kit CAT C27/C32
• Air System – compressor XL1900 T2 EARS, 285 mm airend, pump, filter kit 285/350 mm, COC piping XL1900 Tier 2, oil filter assembly, EARS assembly, light assembly, compressor-to-receiver piping, hose clamp, receiver installation 1900 with clutch, vertical tank assembly with clutch, upper and lower manifolds, main air piping, air system piping assembly
• Hydraulic System – pump drive TRP 1800, 3-hole gearbox 59000 series, main hydraulic piping RCS, diverter valve assembly, diverter manifold, 4-way valve, DR/PR control valve RCS, DR/PR manifold assembly, return manifold assembly, cooling control valve, supercharge manifold, hydraulic tank installation, hydraulic oil reservoir assembly, SAE filter, HOC piping AKG, DHD lube breather assembly, regen valve installation LP, regen-LP valve, valve installation, dual counterbalance valve, counterbalance valve, variable speed fan control RCS
• Electrical System – mainframe electrics RCS4, power pack box RCS assembly, hoist box assembly, I/O module protection assembly, remote hoist control, tower electrics 55 ft RCS4, encoder mount assembly, tower electrical box, tower support electrics angle RCS4, engine wiring C27 PV270, CAT primer pump wiring, NEMA 4 electrical boxes 270 RCS, RCS support case, EARS tester, CCI assembly RCS4 TCP PV270, rig access light switch, engine delay shutdown
• Options – water injection Rhead SS Dynaset, dust skirt installation, DHD lube 60-gallon RCS4, DHD lubricator assembly and tank sub-assembly, DHD lubricator pump, DHD lube tank, tower lube system PV-271, mainframe angle lube electric pump, RCS lube pump assembly, fuel gauge, electrical box assembly, Hall effect sensor assembly, thread lube installation 20 kg, low level DHD lube installation, magnetic drain plugs, washdown gun, LED lights installation, fast service (2F 1W), fast service box with water, oil evacuation XL1900, hand wash tap, foam injection installation and assembly, strobe/marker LED tower, RCS box 7 PV351, tower inclinometer, E-stop option installation, GPS system 450 MHz PV270, GPS external radio kit, GPS cable kit, cab shades PV235, horn assembly PV270 RCS4, stereo CD/MP3/XM installation, tropical roof C27, mirror assembly, video camera RCS4 PV270, auto-level assembly and box, underdeck mist HP, misting valve assembly, mic mute installation, Velcro relay assembly, water tank 822-gallon RCS, water tank 422-gallon PV270, water tank 400-gallon, fire suppression LOP CAT Wormald, fire nozzle mount assembly, cab strobe amber LED, tool holder installation, cab window guard installation, sub pod installation, bit viewer assembly and tray, bit holder installation, grease pressure control, fall protection 55 ft, hydraulic shutoff, CCI assembly RRA TCP PV270, PTO high temp warning installation, HIAB crane assembly, crane powerpack HIAB 24V, light pole installation, light mount assembly, no genset RCS4
• Tools/Accessories – inclinometer decal installation, English decals PV-270, logo decals PV271 RCS4, rod seal assembly, rod seal weldment, water tank drain NDE, international shipping kit, accessories
• Indexes – kit index, numeric index (part number to page), alphabetical index

This parts list is laid out the way a working technician needs it: each assembly drawing appears immediately before its parts table, so you can identify a component visually by its reference number and then look up the exact part number, quantity and unit of measure in the table that follows. Sub-assembly components are listed under their parent item with a dash, and cross-references point you to the page where a detailed breakdown of that sub-assembly begins. The back of the book contains a kit index, a numeric index that maps every part number to its page, and an alphabetical index organised by component name – so whether you have a part number in hand or just know what the part is called, you can find it.

The manual covers the complete PV271D RCS as configured at serial US004704, including the C27 800 HP Tier 2 engine, the XL1900 air compressor system, the full RCS4 control system, and the specific options installed on this machine such as water injection, DHD lubrication, fire suppression, auto-level, GPS and crane provisions. Because the parts list is serial-number specific, it is the correct reference for ordering spares for this exact rig – generic PV270 or PV271 parts books will not reflect the build details of US004704.

Who This Parts List Is For

• Maintenance technicians ordering replacement parts for a PV271D RCS
• Workshop supervisors verifying part numbers before placing an order
• Parts departments cross-referencing Atlas Copco numbers against the machine serial
• Field service engineers rebuilding hydraulic cylinders, rod handling components or the powerhead
• Anyone rebuilding or overhauling a PV271D RCS who needs the factory assembly breakdown

Using the correct parts list matters because Atlas Copco updates component designs across production runs, and the part that fits one serial number may not fit another. The PM kits alone – 250-hour, 500-hour, 1,000-hour and 2,000-hour – contain filter and element part numbers that must match the engine and compressor configuration on your machine. The hydraulic and electrical sections list fittings, hoses, sensors and modules by part number and quantity, so a wrong number means a delayed repair. This document takes the guesswork out of ordering.

IMAGES PREVIEW

Delivered as an instant PDF download, the Atlas Copco PV271D RCS Parts List Manual for serial US004704 can be searched on any device, printed for the workshop, or kept on a tablet at the rig. There is no shipping wait and no physical book to lose – once payment is complete, the file is yours to download and use immediately.