Case TX130-40 TX130-43 TX130-45 TX140-43 TX140-45 TX170-45 Turbo Telehandler Service Manual

Description

Case TX130-40 / TX130-43 / TX130-45 / TX140-43 / TX140-45 / TX170-45 Turbo Telehandler Service Manual

This is the complete Case TX130-40 TX130-43 TX130-45 TX140-43 TX140-45 TX170-45 Turbo Telehandler Service Manual, the same workshop documentation used by professional technicians to service, repair and overhaul these telehandlers. The manual is organised into factory sections covering the engine, powershift transmission, front and rear axles, brake system, hydraulic circuits and the full electrical system with circuit diagrams and wiring lists.

File Details

• Manual type: Service / Workshop Manual
• Brand: Case
• Models covered: TX130-40 turbo, TX130-43 turbo, TX130-45 turbo, TX140-43 turbo, TX140-45 turbo, TX170-45 turbo
• Engine: F4BE0484 — 88 kW (120 CV / 118 HP) Turbo Aftercooler
• Print / document no.: 9-93660
• Language: English (multilingual edition also includes German, French, Italian and Spanish)
• Page count: 2,430
• File format: PDF

Chapters Covered

• Section 00 — General
  • General instructions, adjusting shims, seals for rotating shafts, O-rings, bearings, split pins
  • Notes on spare parts and tooling
  • Safety rules and accident prevention
  • Product identification (vehicle, engine, front axle, rear transmission, cab plates)
  • Environmental considerations and maintenance techniques
• Section 10 — Engine
  • Coding of engines of origin, main and general engine specifications
  • Description of main mechanical components (cylinder block, crankshaft, conrods, pistons, camshaft, cylinder head, valves, flywheel)
  • Lubrication and cooling systems
  • Mechanical injection fuel system and injection assembly
  • Removal of engine-transmission group from the vehicle
  • Engine overhaul on bench
  • Replacement of injectors, valve clearance, timing setting, injection pump timing
  • Electrical components, troubleshooting, tooling and mounting plays
• Section 21 — Powershift Gearbox
  • Gearbox assembly and idler gear case assembly
  • Gearbox operation, transmission and hydraulic oil circuit diagrams
  • Modulation valve operation
  • Torque converter and heat exchanger hydraulic oil circuit
  • Troubleshooting procedures and pressure testing
  • Overhaul and special tools
• Section 25 — Front Axle
  • Specifications, description, operation and troubleshooting
  • Wheel toe-in check and component overhaul
  • Front axle removal procedure and overhaul
  • Axle drive pinion bearing adjustment
  • Front drive shaft
• Section 27 — Rear Axle
  • Specifications, description and operation diagram
  • Component overhaul, removal procedure and special tools
• Section 33 — Brakes
  • Power brakes, parking brake, brake disc adjustment
  • Troubleshooting and brake disc replacement
• Section 35 — Hydraulic System
  • Technical data, steering system hydraulic circuit and steering valve
  • Telescopic boom hydraulic circuit
  • Hydraulic pump, delivery side divider valve, pressure reducing valve
  • Front loader controls, power steering (OSPQ), telescopic boom distributor
  • Auxiliary controls distributor, cylinders and arms
  • Boom removal and working platform calibration
• Section 55 — Electrical System
  • Chapter 1 — Electrical equipment specifications, fuses, controls and instruments, tip-over prevention system, bulb replacement, jump starting, temporary wiring repair, fault finding and working platform
  • Chapter 2 — Circuit diagrams (starting/recharge, transmission, wheel alignment/hydraulic solenoids/brakes, arm control, stabiliser, lights, work lamps, tilting prevention, heating/sound, air conditioner), connector and component lists
  • Chapter 3 — Wiring lists (instrument panel, cab, front, rear, engine)

What This Manual Gives You

This is a full dealer-level workshop manual, not a condensed owner’s booklet. It walks through engine removal and bench overhaul with measured tolerances, valve timing and injector replacement; powershift gearbox disassembly with clutch pack clearances; front and rear axle overhaul including pinion bearing preload and tooth contact checking; wet brake disc servicing; and the complete hydraulic circuit for the steering, boom and auxiliary functions. The electrical chapters go beyond simple fuse charts, with full circuit diagrams and pin-level wiring lists for every harness on the machine.

Why This Manual Matters

The TX130/TX140/TX170 telehandlers use a turbo aftercooler diesel with a microprocessor-controlled powershift gearbox and hydraulically actuated wet brakes, so correct torque values and pressure test figures are critical. This manual supplies the exact mounting plays, tightening torques, calibration pressures and adjustment values the manufacturer specifies — the difference between a repair that lasts and one that comes back.

IMAGES PREVIEW

Instant PDF Delivery

Your Case TX130-40 TX130-43 TX130-45 TX140-43 TX140-45 TX170-45 Turbo Telehandler Service Manual is delivered as an instant PDF download after payment. No shipping, no waiting. View it on any computer, tablet or smartphone, and print the pages you need for the workshop — whether you are servicing one machine on the farm or running a busy repair shop.