CLAAS Dominator 150 140 130 Combine Harvester Operator’s Manual PDF – Instant Download

Description

File Details

• Manual Type: Operator’s Manual
• Brand: CLAAS
• Models Covered: DOMINATOR 150, DOMINATOR 140, DOMINATOR 130
• Language: English
• Page Count: 390 pages
• File Format: PDF
• Document Number: 00 0293 210 2
• Edition: 12/09

Chapters Covered

The CLAAS DOMINATOR 150/140/130 operator’s manual is divided into fourteen main chapters, each addressing a specific aspect of the combine harvester:

• 1 Introduction
• 2 Sectional view of machine
• 3 Safety
• 4 Specifications
• 5 Prior to initial operation
• 6 Prior to each operation
• 7 Overview of controls
• 8 Mounting/removing front attachment
• 9 Driving and transportation
• 10 Fieldwork settings
• 11 Fieldwork
• 12 Faults and remedies
• 13 Maintenance
• 14 Lubrication chart

1 Introduction

Covers how to use this operator’s manual, the validity of instructions, specifications, road traffic regulations and notes on electronic engine management. It also includes identification plate locations for the machine itself and for the CATERPILLAR 3056 E, PERKINS 1006-6T and CATERPILLAR C6.6 engines, plus the drive axle, rear axle, trailer hitch, hitch block, cab and straw chopper.

2 Sectional View of Machine

Provides a full machine overview with numbered component identification and explains access to the workplace and maintenance areas.

3 Safety

General safety information, intended use, reasonable foreseeable misuse, safety and accident prevention regulations, and identification of warning and danger signs. Safety decals are organised by machine section: engine, chassis, cab/operator’s platform, feeder unit, threshing mechanism, separation, crop receptacle/straw receptacle, grain delivery and various components.

4 Specifications

Full technical data for the DOMINATOR 150/140/130, including engine specifications for the CATERPILLAR C6.6, CATERPILLAR 3056E and Perkins 1006-T6 engines. Also covers chassis data, tyre pressures, track widths, brake and steering specifications, electrical system, cab, intake, threshing mechanism, separation, cleaning unit, grain delivery, and dimensions and weights.

5 Prior to Initial Operation

General warnings and an initial operation checklist covering the chassis (wheel removal/installation, rear axle overview, conversion from transport to working position, track width adjustment), hitch installation, electrical/electronic equipment, feeder unit mounting plates and coupling pin alignment, and grain delivery setup including the grain tank safety device.

6 Prior to Each Operation

General warnings and a daily operation checklist to be completed before each use of the machine.

7 Overview of Controls

Detailed layout of the operator’s platform for both DOMINATOR 130 and DOMINATOR 150/140, including the hydraulic system control unit, multifunction handle, switch console, diesel engine speed controls, warning light functions, steering column, cab roof controls, air conditioning systems (York and Sanden compressors), control levers, functions monitor, worklights, cab variants, sun roof and tool box location.

8 Mounting/Removing Front Attachment

Step-by-step procedures for suspending the front attachment, interlocking it, installing the universal drive shaft, connecting the hydraulic and electrical systems, removing the stands, and the reverse process for removal and unhitching.

9 Driving and Transportation

Preparing for road travel and fieldwork, engine starting and stopping procedures for DOMINATOR 150/140 and DOMINATOR 130, chassis controls, gear shifting, ground speed control, towing procedures (forward and reverse), braking and parking, steering, hitch operation (types AK 64/1 B, 810 and 841), driver’s seat adjustment, and front and rear ladder positioning.

10 Fieldwork Settings

Adjustments to prepare the machine for specific crops: feeder unit cutting height indicator and scraper profiles, threshing mechanism concave segments and basic concave adjustment, separation performance monitor sensors, cleaning unit fan speed display and sieve removal/installation, crop receptacle and straw receptacle settings including straw guide plate, free-swinging knives, straw chopper sieves, and grain tank full indicator adjustment.

11 Fieldwork

Description and function of the cutterbar, threshing mechanism, straw walker, cleaning unit and disawning. Includes considerations before combining, front attachment reel adjustment, feeder unit operation (ground pressure, cutting height, reversing), threshing mechanism engagement and concave adjustment, disawner bar installation, drum speed adjustment, separation deflector curtain adjustment, cleaning unit fan speed and manual sieve adjustment, straw chopper operation, grain delivery procedures including grain tank unloading, and full sieve charts and threshing charts for a wide range of crops.

12 Faults and Remedies

Troubleshooting for the cab/operator’s platform (including air conditioner faults and remedies), front attachment, feeder unit, threshing mechanism, separation, cleaning unit, crop/straw receptacle and grain delivery. Includes the grain tank unloading shear bolt installation procedure.

13 Maintenance

General maintenance warnings and information, service intervals, lubricants chart, and detailed procedures for engine maintenance (fuel system, oil and oil filter changes, coolant, air cleaner, cooling unit), chassis, brake system, drive belts and chains (R1 through R42 adjustments and replacements), hydraulic system, electrical system, cab, feeder unit, threshing mechanism, separation, cleaning unit, grain delivery and machine body.

14 Lubrication Chart

Lubrication points organised by service interval (10 h, 50 h, 100 h, 500 h) on both left and right machine sides, with lubricant specifications and greasing cycles.

Your Complete Guide to the CLAAS DOMINATOR 150/140/130

This 390-page CLAAS DOMINATOR 150/140/130 operator’s manual is the definitive reference for anyone responsible for running, maintaining or repairing these combine harvesters. Whether you are an owner-operator, a farm mechanic, or a service technician, this PDF gives you the exact procedures, specifications and safety information the manufacturer intended to accompany the machine.

From the daily operation checklist to the full lubrication chart, every section is written to keep your DOMINATOR performing at its best. The manual covers all three engine variants — CATERPILLAR C6.6, CATERPILLAR 3056E and Perkins 1006-T6 — so you can confidently service whichever powerplant is fitted to your machine. Serial-number ranges are clearly identified, ensuring you apply the correct information to your specific build.

What sets this DOMINATOR 150/140/130 PDF manual apart is the depth of its fieldwork and maintenance content. You get full threshing and sieve charts for crops ranging from wheat and barley to maize, rice, sunflowers and rape seed. The fault-finding chapter walks you through common problems with the air conditioner, feeder unit, threshing mechanism, separation, cleaning unit and grain delivery system — with clear causes and remedies for each. The maintenance chapter includes drive belt and chain adjustment values for R1 through R42, hydraulic system oil change procedures, brake checks, and a complete lubrication schedule.

Every procedure is presented with the safety warnings and caution notes that CLAAS engineers built into the original documentation. That means you can work on your combine knowing you are following the correct torque values, clearances and adjustment sequences — not guessing or relying on second-hand advice.

IMAGES PREVIEW

Delivered as an instant PDF download, this CLAAS DOMINATOR operator’s manual is ready to use on any device. Print the pages you need for the workshop, keep the full file on your phone or tablet for quick reference in the field, and never worry about a lost or damaged paper copy again. No shipping, no waiting — just the complete, searchable manual available the moment you complete your purchase.