CMC S19HD PRO Spare Parts Manual – Exploded Views & BOM PDF

Description

CMC S19HD PRO Spare Parts Manual – Illustrated Parts Catalogue

This is the illustrated spare parts manual for the CMC S19HD PRO tracked aerial work platform, published under the internal reference S19HD PRO and issued as a SPARE PARTS MANUAL. Rather than a service or repair guide, it is the parts-identification document for the machine: every major assembly is broken down into its individual components, each shown on an exploded drawing and cross-referenced to a numbered bill of materials (BOM) so a part can be identified, described and ordered with confidence.

The manual runs to 137 pages and is presented across five languages – Italian, English, French, German and Spanish – with the part description columns repeated side by side in each language. That makes it usable by workshops, dealers and owners in any of those markets without needing a translated copy.

File Details

• Manual type: Spare parts manual / illustrated parts catalogue
• Brand: CMC
• Model: S19HD PRO
• Document title: SPARE PARTS MANUAL – MOD. S19HD PRO
• Languages: Italian, English, French, German, Spanish
• Page count: 137 pages
• File format: PDF
• Structure: Numbered sections, each with a VIEW (exploded drawing) followed by a BOM (bill of materials)

Chapters Covered

• 1 General Orientation
• 2 General View
• 3 First Exploded View (overhead, truck, rotation table)
• 4 Overhead Exploded View
• 5 Turret – Left Side
• 6 Turret – Right Side
• 7 Turret Cylinder
• 8 Pantograph
• 9 Connecting Rod
• 10 Rod Cylinder – Arm Group
• 11 Connecting Rod Cylinder
• 12 First Arm Exploded View
• 13 Fixed Arm
• 14 Extension Cylinder – First Arm
• 15 First Extension – First Arm
• 16 Second Extension – First Arm
• 17 Oscillating Support Cylinder
• 18 Oscillating Support (EU)
• 19 Support + Insulated Basket Group
• 20 Basket Support
• 21 Insulated Basket
• 22 Rotation Table
• 23 Encoder
• 24 Truck Exploded View
• 25 Combustion Engine
• 26 Truck First Exploded View
• 27 Oil Tank Group
• 28 Truck Second Exploded View
• 29 Electric Motor 220V
• 30 Electric Motor 120V
• 31 Electric Motor 110V
• 32 Crawlers Group
• 33 Crawlers
• 34 Front Left – Rear Right Stabilizer
• 35 Front Right – Rear Left Stabilizer
• 36 Stabilizers Cylinder
• 38 Undercarriage Box
• 39 Basket Box
• 40 Hydraulic Circuit: Manual Pump
• 41-46 Hydraulic Circuit: LC Distributor 5EV (positions 1 to 6)
• 47-51 Hydraulic Circuit: Undercarriage (positions 1 to 5)
• 52-55 Hydraulic Circuit: Stabilizer (positions 1 to 4)
• 56-58 Hydraulic Circuit: Crawler Engine
• 59-61 Hydraulic Circuit: Crawlers Opening
• 62 Stickers

What that chapter list actually delivers is a full walk-through of the S19HD PRO from the ground up. The manual opens with orientation and general views so the reader can place front, rear, left and right correctly before touching anything, then works upward through the machine: undercarriage and crawler assemblies, the four stabilizer legs and their cylinders, the truck frame with its combustion or electric drive options, the oil tank group, the rotation table and encoder, the turret with its left and right side layouts, the pantograph and connecting rods, the arm group with its fixed arm and two sliding extensions, and finally the basket support and insulated basket. Every one of those assemblies is drawn as an exploded view with balloons keyed to a table of position numbers, part codes and descriptions in five languages.

The hydraulic circuit sections are especially practical. Instead of a generic schematic, the manual shows the actual routing between components – manual pump, 5EV LC proportional distributor, 4-5 way distributor, translational block, double effect balance valves, outlet block, oil tank, pump and each cylinder – with the tube positions numbered so hoses can be matched to the drawing before anything is disconnected. Separate circuit sections cover the undercarriage, stabilizers, crawler engine, crawlers opening and the distributor positions one through six.

The closing section documents the machine’s safety and information stickers, including maximum load for stabilizers, hooking point, fuel, engine oil top-up, maximum and minimum oil level, radiator coolant, emergency hand pump, translation and filter bench maximum pressures, noise rating, grounding, electrical fuses, grease points and the various warning and area markings.

Why This Parts Manual Matters in the Workshop

Ordering the wrong part on a machine like the S19HD PRO is expensive and slow. Component codes on this platform are long numeric references, and several assemblies use visually similar pins, bushings, forks, slides and pads in different positions. The exploded views and BOMs remove that guesswork: the drawing shows exactly where a part sits in the assembly, and the table gives its position number, CMC code and description, so the number handed to a supplier is the correct one.

Because the same document also records gasket kits, valves, transducers, bushings, sliders and seals as individual line items, it doubles as a consumables reference during a rebuild. When a cylinder is resealed, the BOM lists the gasket kit code alongside the cylinder itself, so both the hard part and the soft parts can be ordered in one pass.

The five-language description columns are a genuine advantage for mixed fleets. An Italian workshop, a French dealer and a Spanish-speaking service team can all work from the same page and reach the same part number without a translation step.

What You Can Do With the CMC S19HD PRO Spare Parts Manual

• Identify any component on the machine from an exploded drawing rather than from memory
• Read off the exact CMC part code for a component before ordering
• See how an assembly is built up before dismantling it, including pin, bushing and ring-nut positions
• Match hydraulic hoses and tubes to numbered positions in the circuit diagrams
• Find cylinder seal and gasket kit references for the turret, arm, extension, oscillating support and stabilizer cylinders
• Distinguish between the combustion engine, 220V, 120V and 110V electric motor variants of the truck
• Reference the stabilizer, crawler, basket and undercarriage assemblies down to individual hardware
• Check the correct safety and information decals for the machine

Whether the job is a single worn slide pad, a complete cylinder reseal, a damaged stabilizer leg or rebuilding a turret after an incident, the parts identification work starts here. Getting the identification right first is what keeps a repair on schedule and stops a second delivery being ordered for the same job.

IMAGES PREVIEW

Instant PDF Delivery

The manual is supplied as a PDF and is available immediately after payment – nothing is shipped and there is no waiting on a courier. It opens on a workshop PC, laptop, tablet or phone, can be printed page by page or as a complete binder for the service van, and individual exploded views can be printed and taken to the machine. Every section stays searchable by part code, so finding a component reference takes seconds rather than a flip through a paper catalogue.