Deutz-Fahr Agrokid 210 220 230 Workshop Manual – PDF Repair Guide

Description

Deutz-Fahr Agrokid 210 220 230 Workshop Manual

This Deutz-Fahr Agrokid 210 220 230 Workshop Manual is the full service and repair guide for the Agrokid compact tractor series, issued by SAME DEUTZ-FAHR ITALIA S.p.A. It is written for repair technicians and authorised service centres, and it works just as well for any owner or independent workshop that wants to work on an Agrokid 210, 220 or 230 with the correct procedures, tightening torques and adjustment data in hand. The document runs to 488 pages and covers the whole machine, from the engine block and crankshaft through the transmission, rear axle, front axle, hydraulic system and electrical system, all the way to the front PTO, front lift, rear lift, wheels and ballast. Wiring diagrams are included as a complete chapter with connector positions and harness layouts.

File Details

• Manual type: Workshop Manual
• Brand: Deutz-Fahr (SAME DEUTZ-FAHR ITALIA S.p.A.)
• Models covered: Agrokid 210, Agrokid 220, Agrokid 230
• Language: English
• Page count: 488 pages
• File format: PDF
• Document number: 307.W.0430.en.6.02
• Date: 04/2015

Chapters Covered

• 0 – Introduction
  • Safety notes
  • General safety rules
  • Safety precautions for removal and refitting operations
  • Lifting instructions
  • Tightening torques
  • Threadlockers, adhesives, sealants and lubricants
  • Conversion factors
• 10 – Technical Characteristics
  • Transmission
  • Rear PTO and Mid PTO
  • Brakes and rear axle assembly
  • Front axle
  • Gear pump
  • Differential lock control assembly
  • Steering circuit
  • Power steering valve
  • Remote control valve
• 20 – Calibrations and Electronic Diagnosis
  • Baruffaldi electromagnetic clutch
  • Operator seated sensor ECU (p/n 2.8519.106.0)

  IMAGES PREVIEW

  

  

  

• 30 – Method of Intervention
  • B0 – Engine
  • C0 – Engine accessories
  • D0 – Transmission
  • E0 – Rear axle
  • F0 – Front axle
  • G0 – Bodywork, Cab, Platform
  • H0 – Hydraulic system
  • L0 – Electrical system
  • M0 – Front PTO
  • N0 – Front lift
  • R0 – Rear lift
  • S0 – Wheels
  • V0 – Ballast and towing hitches
• 40 – Wiring Diagrams
  • Structure of the unit and wiring/component index
  • Basic electronics for mechanics
  • Electrical and electronic components
  • Components and pinouts
  • Systems (starting, control unit – fan, steering column lights switch, instrument panel, cab, aereo cab, PTO, front axle differential lock, brakes)
  • Wiring harnesses and connector positions

Across those five main chapters the Deutz-Fahr Agrokid 210 220 230 Workshop Manual builds into a complete picture of the machine. Chapter 0 sets the working ground rules: the safety procedures that apply before any component comes off, the lifting and support requirements for assemblies over 25 kg, the general bolt and fitting torque tables, the pipe and plug torque tables, and the threadlockers, sealants and lubricants used on the assembly line. Chapter 10 gives the technical characteristics for the transmission, the rear and mid PTO, the brake and rear axle assembly, the front axle, the hydraulic gear pump, the differential lock control, the steering circuit, the power steering valve and the remote control valve. Chapter 20 covers the electronic side, with diagnostic screens and thresholds for the Baruffaldi electromagnetic clutch and the operator seated sensor ECU. Chapter 30 is the repair heart of the manual, and Chapter 40 is the complete wiring diagram reference.

What the Agrokid 210 220 230 Repair Guide Covers in Practice

The engine section of this Agrokid workshop manual is built around the S3L, S3L2, S4L and S4L2 engine family. It starts with preparation for disassembly, engine separation from the transmission, and a compression test before going into the engine block, crankshaft, pistons and sump. Inspection procedures follow for the engine monobloc, the crankshaft, the flywheel and ring gear, the pistons, piston rings and gudgeon pins, the connecting rods, the camshaft, the idler gear, the valves, valve guides and valve seats, the valve clearances, the rocker arms and rocker shaft, the cylinder head and valve train components, the valve springs and the valve pushrods. The lubrication system is covered through to the oil pump, pressure relief valve and oil pressure switch, and the fuel system runs from the lift pump and injection pump through to the injector nozzles and governor. Cooling system, air intake pipe and intake and exhaust systems round out the engine chapter.

Engine accessories get their own section: radiator, expansion tank, fan, air cleaner, fuel filter, fuel tank and fuel tank float switch, auxiliary fuel tank, engine stop keyswitch, exhaust pipe, alternator and starter motor, including disassembly of the starter motor with armature, field coil, brush gear and overrunning clutch tests.

Transmission coverage in the Deutz-Fahr Agrokid 210 220 230 workshop manual is unusually thorough. It handles the clutch plate and clutch plate wear check, clutch release bearing, clutch release forks and clutch housing, then breaks down the gearbox input shaft, main shaft and secondary shaft. The gearbox and shuttle assembly, range gearbox and differential assembly, gearbox input shaft oil seal renewal, bevel gear pair, 4WD output shaft and groundspeed PTO, creeper synchronizer renewal, PTO output shaft, parking brake and bevel gear pair adjustment are all documented as complete units. The rear axle chapter covers the left-hand rear axle, LH/RH rear axle disassembly, rear differential and rear axle brake discs. The front axle chapter covers the front support, complete front axle assembly, steering cylinders, steering knuckle housing and axle shaft, the front axle bevel gear pair, propeller shaft and front axle drive shaft, and the planetary reduction gear.

The hydraulic system chapter deals with the pump for hydraulic lift and auxiliary services and the power steering system, transmission oil filter assembly, power steering valve complete assembly and disassembly, lift control valve pressure relief, lift locking shut-off valve, remote control valve, control rods and the double/single acting conversion valve. The electrical system chapter covers the battery, fuse and relay assembly, electrostatic unit, parking brake switch, brake light switches, steering column switch and the right-hand console control buttons.

Front PTO, front lift and rear lift are each given full removal and rebuild procedures, including the pump-clutch-brake assembly, PTO output shaft, solenoid valve, lift cylinders, lift arms, hydraulic lift control valve and the three-point linkage with mechanical adjustment. The final section covers front and rear wheels and the support and towing hitch, and the wiring diagram chapter closes the manual with every harness layout, connector position and system schematic.

Who This Manual Is For

This is a technician-level document rather than an owner’s handbook. It assumes you are working with proper tooling, a torque wrench and the specified special tools where the manual calls for them. Independent workshops that service Agrokid tractors will find the adjustment data for the bevel gear pair, the differential preload and the pinion position especially useful, because those procedures are normally locked away in dealer documentation. Owners who do their own maintenance will get the most value from the torque tables, the fluid capacities, the valve clearance adjustment and the electrical fault-finding material.

Work the Agrokid 210, 220 and 230 Correctly

With the Deutz-Fahr Agrokid 210 220 230 Workshop Manual on hand you can carry out scheduled servicing, diagnose faults, remove and refit major assemblies, overhaul the engine, rebuild the transmission and axles, service the hydraulics, and troubleshoot the electrical system using the factory wiring diagrams and connector positions. Using the correct tightening torques, clearances and adjustment values is what separates a repair that lasts from one that comes back. The manual gives you those numbers directly rather than leaving you to guess. It is delivered as an instant PDF download after payment, with no shipping and no waiting. Read it on any device, print the pages you need for the workshop bench, and keep the whole document on file for the next job.