DK Medical Systems Elmo-T3S Mobile X-ray Unit Service & Installation Manual PDF

Description

DK Medical Systems Elmo-T3S Mobile X-ray Unit Service & Installation Manual PDF

This is the combined service and installation manual for the DK Medical Systems Elmo-T3S mobile X-ray unit, published under document number SME-Elmo T3S-1 (Revision 1, March 2018). The Elmo-T3S Service & Installation Manual is written specifically for professional service engineers and covers every aspect of maintaining, troubleshooting, and installing the Elmo-T3S — from daily inspection checklists through internal component replacement and full system wiring. It is not intended for general operators and explicitly states it should be used only by personnel who have received proper training.

File Details

• Manual Type: Service Manual & Installation Manual (combined)
• Document Number: SME-Elmo T3S-1
• Revision: 1 (first issued August 2016; revised March 2018)
• Brand / Manufacturer: DK Medical Systems Co., Ltd.
• Model: Elmo-T3S Mobile X-ray Unit
• Language: English
• Pages: 111
• File Format: PDF
• Software Revision Covered: 1.0

Chapters Covered

• Preface — Operating precautions for electric medical equipment; warranty terms; radiation cautions; EMC cautions; long-view radiography cautions; cleaning and disinfection guidelines; maximum permissible dose guidance; service life (10 years); disposal precautions; abbreviations; warning and caution label locations
• 01 Overview
  • 1.1 Application — purpose and precautions on use
  • 1.2 Side Effects
  • 1.3 Operating Principle — OP Panel, Main Body, essential features, inverter-method operation
  • 1.4 Safety Symbols for System
  • 1.5 Specification — full technical spec table with head arm operating ranges, battery, dimensions, weight, electric power
  • 1.6 Composition — component list with code numbers and options
• 02 Appearance
  • 2.1 Elmo-T3S Appearance — exploded-view diagram with all 14 numbered assemblies (OP Ass’y, Hand switch, Clamp Lever, Head Arm Ass’y, Head unit, Collimator, Main Pipe Module, Cord Reel, Brake Handle, Gas Spring, Base, Wheel Ass’y, Caster, DTR Case Ass’y)
• 03 Operation
  • 3.1 Environmental Conditions for Operation — temperature, humidity, air pressure, luminosity, noise level; power supply; transport and storage conditions
  • 3.2 Operator’s Profile
  • 3.3 Checking Safety — starting and ending inspection protocols
  • 3.4 Instruction of Use — collimation, X-ray operation procedure, tube aging / inspection procedure with kV/mAs aging table
  • 3.5 Operation — brake module, OP console, hand switch, head arm, remote controller descriptions
  • 3.6 Console Membrane — full operating panel breakdown (17 controls: state display window, Sec/mAs setting, main power lock, battery switch, X-ray exposure/ready switches, collimator lamp, direction/part select, APR, kV, mA display)
  • 3.7 Power ON/OFF — key lock device and battery power switching

  IMAGES PREVIEW

  

  

  

• 04 Preparation for Installation
  • 4.1 Installation Part & Tools — parts list, required installation area (3500 mm × 3000 mm or more), ceiling height (approx. 2300–2800 mm), tools required
• 05 Installation
  • 5.1 Install the Notebook — step-by-step assembly of hp Notebook Plate, BK hp brackets, Router (ipTIME-A604), and HP-EliteDesk 850G touch into the notebook upgrade kit
  • 5.2 Wiring Arrangement for Notebook — routing and connecting the power cable from the notebook kit through the OP Ass’y to the adaptor on the Cord Reel
• 06 Maintenance
  • 6.1 Preventive Maintenance — up/down, right/left, and rotation movement checks; daily/monthly/yearly check point matrix (appearance, rail, vertical movement, rotation, horizontal movement, cassette, switch)
  • 6.2 Maintenance & Inspection — daily inspection schedule; cleaning and sanitation procedures; periodic inspection (every 6 months by DK Medical Systems service agent)
  • 6.3 Periodic Replaced Parts
  • 6.4 Checklist — starting inspection checklist and ending inspection checklist
  • 6.5 Error Code — full error code list (E_KEYOFF, E_EP, E_IP, E_FIL, E_OCP, E_OVER, E_No_mAs, E_mAs_Over, E_THOver, E_THOpen, E_TransErr, E_IC Error, E_LOW_BAT) and how to fix each
  • 6.6 How to Fix the Problems
    • 6.6.1 How to replace the Head Unit (with part numbers)
    • 6.6.2 How to replace the Gas Spring
    • 6.6.3 Inspection of Internal Parts (back cover removal procedure)
    • 6.6.4 How to replace the Wire (brake cable inner/outer)
    • 6.6.5 How to adjust Wire Tension
    • 6.6.6 How to disassemble the Head Unit (screw specs, tank alignment, angle scale assembly)
    • 6.6.7 Remote Controller (range: 10 m at ±30°; battery replacement: AAA × 2)
    • 6.6.8 Wiring for OP Board — Main OP Board (REMOTE-OP PBA, HEADER-OP PBA, MAIN_B/D Harness)
• 07 Appendix
  • 7.1 Connection Diagram — full system wiring schematic (AC input, cord reel, battery charger board, battery pack, DC-DC converter, driver board, HV tank, main board, OP board, hand switch, remote/remocon module, notebook)
  • 7.2 Dimension — top, front, and side view drawings with mm dimensions
  • 7.3 Manufacturer Information — regulatory compliance (Medical Device Directive 93/42/EEC), IEC/EN standards list, authorized EU representative (Obelis s.a., Brussels)

Together these chapters give a service technician a complete reference for the Elmo-T3S: understanding how the inverter-driven X-ray generation circuit works, navigating every error the system can throw, tracing harness faults back to specific board connections, and rebuilding mechanical assemblies to manufacturer tolerance. The maintenance chapter’s daily/monthly/yearly check matrix and the structured checklists are directly usable as working documents on the service floor.

Important Note for Buyers

This manual is specifically for trained service engineers and installation personnel. It explicitly states it should not be used by those who have not received proper DK Medical Systems training. Periodic inspections (every 6 months) are designed to be carried out by DK Medical Systems service representatives, while daily inspections are the operator’s responsibility.

What You Can Do With This Manual

The DK Medical Systems Elmo-T3S Service & Installation Manual enables a qualified service engineer to diagnose every documented error code with a clear remediation path, replace all major serviceable assemblies (head unit, gas springs, brake cable, wire tension), install the optional notebook upgrade kit from scratch, trace wiring faults through the full system connection diagram, and execute structured preventive maintenance on the correct daily, monthly, and annual schedule. Having the correct procedures and torque-sensitive assembly sequences from the manufacturer means components are reinstalled without guesswork, protecting both the machine and the patients it serves.

This is a PDF download. Payment is processed securely and the file is available immediately after checkout — no shipping, no waiting. The PDF can be opened on any device and printed for bench use.