Doosan DX220A DX225LCA Excavator Parts Catalog K1049154CEF PDF Parts List

Description

Doosan DX220A and DX225LCA Illustrated Parts Catalog K1049154CEF

The Doosan DX220A DX225LCA Excavator Parts Catalog K1049154CEF is the full illustrated parts list issued for both the DX220A and the long-undercarriage DX225LCA excavators. This is the 4th Edition, dated April 19, 2016, and it names and numbers every serviceable component on the machine – engine internals, hydraulic cartridges, structural pins and bushings, gasket kits, seals, fasteners and every attachment and option offered for these two models. If you need to identify a part on a DX220A or DX225LCA before ordering it, this is the PDF that tells you the exact Doosan number, the figure it sits under, how many the machine uses, and whether a superseding improved number applies.

File Details

• Manual type: Illustrated Parts List / Parts Catalog
• Brand: Doosan
• Models covered: DX220A, DX225LCA
• Catalog part number: K1049154CEF
• Model suffix: CEBAC
• Edition: 4th Edition
• Publication date: April 19, 2016
• Language: English and French (bilingual)
• File format: PDF
• Page count: 992 pages

What This DX220A DX225LCA Parts List Covers

The catalog is organised into clearly separated sections, each one built around exploded illustrations with numbered callouts that are matched to an itemised parts table. The listed contents cover the following assemblies and systems:

• Engine parts – cylinder block, timing gear case, flywheel housing, crankshaft, cylinder head, valve mechanism, breather pipe, oil pump, oil filter, oil cooler, oil pan, thermostat, water pump and cooling fan, intake and exhaust manifold, turbocharger and oil pipe, fuel system, fuel filter, alternator mounting, starter, and top / full overhaul gasket kits
• Body parts – main frame, counterweights (4.1 ton DX225LCA and 3.8 ton DX220A), engine mounting, radiator mounting, radiator, muffler, CAC piping, air cleaner assembly, pump mounting, swing motor, fuel tank, fuel piping, oil tank, oil cooler piping (three sections), engine control, main piping (five sections including pump, boom, arm and bucket, swing and centre joint), pilot piping (eight sections), left and right control stands, seat sliding plate, seat plate, seat mounting, seat, duct cover, heater cover, cabin mounting and cabin (four sections)
• Track and undercarriage parts – long track frame for DX225LCA, standard track frame for DX220A, travel device for each model, idler for each model, track spring, upper roller, lower roller, centre joint, 600G track shoe assembly for each model, travel piping for long crawler and standard
• Front parts (attachment) – 5.7 m boom, 2.9 m arm, 0.92 m3 bucket assembly, boom piping, boom lubrication piping, arm piping and arm lubrication piping
• Hydraulic parts – main pump, regulator, gear pump, swing motor, swing reduction gear, travel motor, travel reduction gear, control valve (three sections), joystick valve, pedal valve, solenoid valve, boom cylinders left and right, arm cylinder, bucket cylinder for 2.9 m arm, two-way pedal valve, bucket cylinder for 2.4 m arm, bucket cylinder for 3.5 m arm, bucket cylinder for 6.2 m arm, boom cylinders with lock valve, arm cylinder with lock valve, and the rotation gear pump
• Other parts – special tools, spare parts kit contents, cabin name plates, export name plates, specification decals, fuse box decal, machine name decals, lubrication decals, boom decals, serial decals and lifting capacity decals
• Option parts – fuel filler pump, pre-cleaner for the air cleaner, one-way and two-way main piping with and without filter, one and two-way pilot piping, one-way pilot piping, two-way pilot piping (two sections), 5.7 m boom piping for one and two-way / quick clamp, 2.9 m arm piping for one and two-way / quick clamp, quick-fit main piping, quick-clamp electric parts, 80A alternator, CD player, sun roof cover, rain shield, rain shield and lamp mounting, cabin lower guard, window guard, two-way and rotating floor mats, fogs guard assembly, 700G / 800G / 900G track shoe assemblies for DX225LCA and 800G for DX220A, swing alarms (all configurations), radio, boom and arm lock valve pipings, boom 5.2 m, 8.5 m booms, arm 2.0 m, 2.4 m, 3.5 m and 6.2 m with their pipings and lubrication pipings, super-long and 5.3 ton counterweights with and without noise kits, bucket assemblies in 0.39, 0.45, 0.51, 0.54, 0.73, 0.81, 0.90, 0.91, 0.92, 1.05, 1.07, 1.17, 1.23, 1.24, 1.28, 1.32, 1.35, 1.40, 1.49 and 1.51 m3 with side pin or H class variants, ROPS cabin assemblies and their seat, floor, guard, working lamp, beacon and air conditioner sub-systems, and TMS installations

IMAGES PREVIEW

How the Parts Catalog Is Structured

Every assembly in this DX220A DX225LCA parts list follows the same three-part pattern. First, a full-page illustration of the assembly with each visible component tagged by a key number. Next, the corresponding parts table with the key number, Doosan part number, part description in both English and French, the quantity used per machine, a service code letter where relevant, and – for many items – the serial number range the part applies to. Where a component is made of further sub-components, those are indented under the parent line with the same style so the hierarchy is preserved all the way down.

The table also carries a service-code column that tells you whether a part is supplied ready to fit, whether it is only available inside a kit, whether it is superseded by an improved number, and whether the quantity varies between machines. The interchangeability column flags whether an older number can be replaced by a newer one, and whether that substitution works in one direction only. That is what lets a parts counter or a workshop order the correct replacement every time instead of guessing from a photograph.

Serial Number Ranges and Machine Identification

The Parts List is tied to a specific machine serial prefix – CEBAC – and where part usage changed during production, the applicable serial ranges are printed directly in the parts table. Engine serial information, where it appears, uses the prefix ECOEI. The front of the catalog shows how Doosan wants parts to be ordered: quote the machine model as it appears on the nameplate (DX220A or DX225LCA), the machine serial number, the engine serial number, the part number and the description, plus the quantity. Having that ordering convention in the same PDF is one of the reasons this catalog is worth keeping on the workshop tablet rather than on a shelf.

Who This Doosan Excavator Parts Book Is For

Independent repair shops servicing Doosan 22-ton class excavators will get the most out of this parts catalog, because it lets them confirm the exact numbers to order without a trip to a dealer. Fleet maintenance departments get a fast way to check which parts are common between the DX220A and the DX225LCA – and which are not – before stocking spares. Rebuild and refurbishment projects gain access to the full bill of materials for every sub-assembly, including the sub-components that would otherwise only be visible on a stripped-down machine. Owner-operators handling their own servicing can finally put a real part number to the seal, filter or fitting they are holding in their hand.

Why a Proper Parts Catalog Matters

Doosan built a lot of overlap into these two excavators, but there are also critical differences – serial number break points, superseded components, and parts that only exist as part of a larger assembly. Ordering by guesswork, by photo, or by copying a part number from an internet listing that came off a different serial range is a fast way to end up with a part that will not fit. The Doosan DX220A DX225LCA parts catalog K1049154CEF removes that risk: you look up the figure, read the number off the table, cross-check the serial range column and the interchangeability column, and order confidently.

Instant PDF Delivery of the DX220A DX225LCA Parts List

The Doosan DX220A DX225LCA excavator parts catalog K1049154CEF is delivered as an instant-download PDF. There is no shipping, no waiting, and no physical book to keep track of. After purchase the file is available immediately from your account, and it can be opened on a laptop, tablet or phone in the workshop, printed page-by-page for the assemblies you are actively working on, or bookmarked on whichever device lives closest to the machine. That combination – every figure, every part number, every quantity, always in reach – is exactly what makes this PDF parts list the working reference for anyone maintaining a DX220A or DX225LCA.