Epiroc Boomer S1 D Spare Parts Catalog 8999662100-002 PDF Download

Description

File Details

• Manual type: Spare parts catalog
• Brand / model: Epiroc Boomer S1 D
• Document number: 8999662100-002
• Language: English
• Page count: 1352
• File format: PDF
• Source marking: Generated from DocMine

The Epiroc Boomer S1 D Spare Parts Catalog 8999662100-002 PDF Download is the illustrated parts list for the Boomer S1 D face-drilling jumbo. It is organized by machine module so a parts clerk or mechanic can match a worn component to a part number, quantity, and remarks line without guessing across look-alike assemblies. Every printed page in this file carries the header 8999662100-002 Boomer S1 D. Footers also note that printed information may lag the live DocMine listing, so treat this PDF as the snapshot captured in revision 002 rather than a live inventory feed.

Chapters Covered

• Parts and service — complete assembly index, SET, MAINTENANCE, and PM-KITS
• Maintenance kit — engine hours, Deutz TD 3.6, Stage V
• Maintenance — engine hours, Deutz 914, 55 kW, Stage 3A
• PM-KITS — 500 engine hours, Deutz D914, 55 kW, Stage 3A
• Maintenance — engine hours, Deutz BF4L 914, 72 kW, Stage 3A
• PM-KITS — 500 engine hours, Deutz BF4L 914, 72 kW, Stage 3A
• Maintenance kits — cabin or canopy with compressor GAR 30
• Maintenance kits — cabin with compressor LE10; canopy with compressor LE 5 / 7 / 10
• PM-KITS — 250 hours, 1000 percussion hours, 2000 percussion hours
• SET, PRE-MAINTENANCE — 500 / 1000 / 2000 percussion hours
• Rock drill COP 1838HD+ — front part, cover group, cover complete
• Gear housing group, rotation chuck complete, intermediate part group
• Cylinder group, cylinder complete, cylinder DR, front and rear seal houses
• Back head group
• Hydraulic motors MSQ 80 SH, MSQ 100 SH, MSQ 160 SH, MSYQ 250 SH and correction kits
• Accumulators (right, left, return), valves, holder set, label set, protect cap set
• Optional set, tools set, pressure gauge set, overhaul fixture, charging device
• O-ring set, seal kit, seal kit for damping piston
• Overhaul kit COP 1838HD+ / 600 impact hours and / 1200 impact hours
• Conversion kit COP 1838HD to COP 1838HD+; conversion kit to four corners, straight splines
• SET, SEAL — front seal kit
• Feed module — feed BMHT2843/25 BSHXS, upper and lower feed beams
• Drill steel support, expanding shaft, limit switch, end piece, cradle sets
• Hydraulic cylinders BMHT 1000/2000, pulley wheel, hose drum, hose holders and guides
• Sensor sets — BMHT2x43/25 BSHXS, limit switch, cradle, beam linear sensor
• Boom module — boom left, boom part rear, boom attachment, boom link, cylinder link
• Boom body, telescope set, bearing housing, boomride cylinders, check valves
• Hydraulic set BUT 29, hose holders, sensors, angle sensor, look-out and feed-extension kits
• Cable set RCS flow, feed-holder assembly BMHT left, lubrication system BUT 29
• Front module — front frame, counterweight, stage, mudguard, 24 V electrical system
• Hydraulic system — direction valves, inlet/valve/outlet sections, logic valve, sequence valve
• Hydraulic sets — front module, boom suspension, DSS S1D-front module, telescopic feed, control valves Y156
• Air/water system, boot washer, Nokian 9.00-20 wheel set offset -25
• Drive unit — drive shaft, crown wheel kit, differential kit, vane kit, planet gear kit, brake, cardan shafts
• Support leg kit BSJ-10-40, steering cylinder set, manual grease system, FAM kit, drill stop
• Cabin module — cabin complete, locks, wipers, glass, ROPS attachment, hoods
• Cabin 24 V electrical system, junction boxes A53 / A48 / A58, panels A71 / A74, drill panel DCS
• Air conditioner VAC S1 D MK4, chair complete, FAM 3 display and palm-grip controls
• Drill stop including ROM, PLC system, program package Rel 4.1
• Power module — mechanics, 55 kW 550/575 V 50 Hz electric motor, hydraulic reservoir and oil cooler
• Hydraulic pump A10VO 100 cc, pump unit, gear pump, coupling set electric motor to pump
• Hydraulic set reamer / big-hole option, electric oil filler
• Middle module — MKIII frame, drive axle, drop box, fuel system, battery box
• Diesel engine unit turbo — Deutz BF4L 914, air filter set, exhaust, cooling system, air-oil cooler
• Compressor LE7-10UV hydraulic drive, 10 cc hydraulic motor CCW, hole-blow kit
• Rear module — rear frame, cable reel with drive, collector kits K440/4, electrical cabinet A50
• Water pump unit, air receiver, hose reel complete, camera kit
• System monitoring Certiq 2.0
• Fire extinguishing set Ansul and Checkfire, tank, fire-suppression hose list

Taken together, those sections turn the Epiroc Boomer S1 D Spare Parts Catalog 8999662100-002 PDF Download into a module-by-module map of the jumbo. A technician looking at a failed rotation motor, a cracked feed beam, a leaking boomride cylinder, or a missing cabin lock can open the matching group, read the item balloons against the exploded drawing, and copy the part number and quantity from the facing table.

Preventive-maintenance kits and powertrain options

The opening Parts and Service block is built around hour-based kits rather than a single generic filter pack. Separate maintenance and PM-KIT pages exist for a Deutz TD 3.6 Stage V engine, a Deutz 914 / D914 55 kW Stage 3A engine, and a Deutz BF4L 914 72 kW Stage 3A engine. Cabin and canopy configurations are split again by compressor family: GAR 30 on some kits and LE5 / LE7 / LE10 on others. Percussion-hour pre-maintenance sets appear at 500, 1000, and 2000 hours, and a 250-hour PM-KIT page sits beside the 500-engine-hour packs.

Kit contents shown in the tables include items such as V-belt 5750532706, air-filter element 5112305242, safety cartridge 5112305243, main and pre fuel filters 6060009317 / 6060009318, engine oil filter 5112303505, and hydraulic-element 6060016687 on the TD 3.6 path. Other engine rows list their own oil-filter numbers (for example 5112300759 and 6060011415). The catalog states plainly that PM-kit content is based on a standard machine without optional equipment, and that maintenance parts for options must be ordered separately. That warning matters when a rig carries extras such as a reamer / big-hole hydraulic set, FAM 3, drill stop, or Certiq 2.0.

COP 1838HD+ rock drill breakdown

The rock-drill chapter is the longest single-component section in the Epiroc Boomer S1 D Spare Parts Catalog 8999662100-002 PDF Download. Exploded views walk from the shank end through the front part, cover, gear housing, rotation chuck, intermediate part, cylinder, front and rear seal houses, and back head. Rotation is covered by four hydraulic-motor families — MSQ 80 SH, MSQ 100 SH, MSQ 160 SH, and MSYQ 250 SH — each pointing back to a shared correction kit. Accumulators are split left, right, and return, with a dedicated valve page used by more than one accumulator group.

Service kits are listed as discrete complete assemblies rather than loose hardware: O-ring set, general seal kit, damping-piston seal kit, and front seal kit. Timed overhaul kits are called out by impact hours: part 3115923893 for the COP 1838HD+ 600-impact-hour overhaul kit and part 3115923894 for the 1200-impact-hour kit. Conversion coverage includes a kit from COP 1838HD to COP 1838HD+ and a kit to four-corner straight splines. Support items such as the overhaul fixture and mounting table, charging device, connection plate for (O)MS(Q) motors, tools set, and pressure-gauge set sit in the same chapter so a workshop can stage a rebuild from one section of the catalog.

Feed BMHT2843/25 BSHXS and boom BUT 29

The feed chapter opens on feed BMHT2843/25 BSHXS with a full exploded layout of upper and lower beams, drill-steel supports (including the BSHXS variant), expanding shaft, limit switch, standard end piece, and BMH(T) 2800 cradle hardware. Hose routing is treated as its own family of sets: hose drum complete with bushings, hose fender, hose guide for BMH 2000/6000 bulkhead, multiple hose holders, nipple sets for the feed cylinder, and both rubber and steel BSH T/R38 bushing sets. Sensor pages cover the BMHT2x43/25 BSHXS package, limit-switch set, cradle sensors, and the beam linear sensor.

Boom coverage starts at boom left and continues through the rear boom part, attachment, links, shafts, boom body, telescope set, boomride cylinders, and cylinder protection. The BUT 29 hydraulic set, hose holders, and lubrication system (rear boom plus boom extension) are listed as complete assemblies. RCS flow cable diagrams, feed-holder hardware for BMHT left, earth-place EMC set, and calibration set with spirit level close the boom module. Those pages are what you use when a telescope wear pad, expanding shaft, or look-out sensor has to be ordered to the correct boom side.

Carrier modules, electrics, and safety equipment

Front, cabin, power, middle, and rear modules occupy the second half of the file. The front frame chapter includes counterweight, stage, mudguard, 24 V front-module electrics, and a large hydraulic-system tree: inlet, valve, and outlet sections, logic valve, 3/2 24 V electric direction valves, pressure-regulating valve block, sequence valve, and hose sets split by basic front-module hoses, support-leg / boom-frame hoses, and left/right valve banks. Dedicated hydraulic sets cover boom suspension, the S1D front-module DSS package, telescopic feed, and control valves Y156. Air/water pages list the front-module solenoid valve, internal air-hole blowing kit, and boot-washer hoses. Running gear is specified as the Nokian 9.00-20, offset -25 wheel set with 7.5-20 rim offset +25 mm and 9.00-R20 AG Mine TT tire set. Drive-unit tables cover the drive shaft, complete-kit-only crown wheel and differential kits, vane kit, planet gear kit, brake, and cardan shafts. Support legs are the BSJ-10-40 STD kit with matching hydraulic cylinders.

Cabin pages list the complete cabin, door stops, left and right lock sets, front-low and rear-low wipers, windscreen wash, glass, binder box, ROPS cab attachment, and compiled hoods. Electrical breakdowns name junction boxes and panels (A51, A53, A58, A71, A72, A74, A48) plus hour meter, emergency mushroom pushbuttons, and ignition locks. The drill panel DCS section includes directional-valve hardware, lever holder, seal kit, pressure-control valves, and the A20 electric set. Comfort and guidance items include chair complete with swing, air conditioner VAC S1 D MK4 (condenser, AG-filter, compressor set, gear motor), FAM 3 apparatus panel A66, palm grip, and cabin display kit. Drill-stop coverage extends to the ROM-inclusive cabin package, safety system, PLC with software and expansion module, and program package Rel 4.1.

Power-module tables identify electric motor part 9106108904 as 55 kW 550/575 V 50 Hz, then the pump-control valve block, V-pump valve block, oil cooler, hydraulic reservoir, return filter, shaft coupling from electric motor to pump, and hydraulic pump A10VO 100 cc (part 3217876200) with its pump unit and gear pump. A separate reamer / big-hole hydraulic set and an electric hydraulic-oil filler sit at the end of that module.

IMAGES PREVIEW

The middle module is the diesel and compressor side of the carrier: MKIII intermediate frame, internal drop-box drive axle, fuel system, 24 V solenoid valve, manual lubrication, battery box and charger, jump-start set, and air/water hardware built around compressor LE7-10UV hydraulic drive with a 10 cc CCW hydraulic motor. The turbo diesel engine unit lists Deutz BF4L 914 together with fan grid, engine-to-pump coupling, engine-oil drainage, air-filter set, throttle control, exhaust silencer, cooler support, and air-oil cooler. Rear-module pages cover the rear frame (including a Boltec S frame line in the contents), cable steering, cable reel with drive, collector kits K440/4, electrical cabinet A50, dual cable/hose reel control, water-pump unit, air-receiver set, hose-reel complete with swivel and torque unit, rear camera kit, Certiq 2.0 monitoring, and the Ansul and Checkfire fire-extinguishing set with tank and fire-suppression hose list.

How the lists are laid out

Almost every group uses the same six-column table: Item, Part No., Name, Qty, Remarks, Reman No., plus an L column. Complete-assembly rows sit at the top of a group so a buyer can order a kit (PM-KIT 6060012200, overhaul kit 3115923893, sensor set 3128314772, and so on) instead of picking every washer. Remarks carry fitment notes such as air filter, main filter, pre-filter, engine oil filter, hydraulic oil filter, UNF 9/16–G 1/4 nipples, M10 x 25 8.8 screws, 0–16 bar gauges, and 24 V DC solenoid ratings. Exploded drawings use numbered balloons that match those item numbers; some pages mark seal-kit items in a circled callout and others flag items that are not illustrated. That pairing of drawing plus table is the practical core of the Epiroc Boomer S1 D Spare Parts Catalog 8999662100-002 PDF Download.

Identify the right Boomer S1 D part and order it with the number in front of you

This catalog supports parts identification and kit selection across the rock drill, feed, boom, cabin, powerpack, diesel module, and rear services of the Boomer S1 D. It does not replace a workshop procedure manual: there are no step-by-step overhaul instructions, torque charts, or diagnostic flowcharts here. What it does give you is the correct Epiroc part number, quantity, and remarks line for the assembly you are standing in front of, including hour-based PM kits and the 600- and 1200-impact-hour COP 1838HD+ overhaul kits. Using the number printed in 8999662100-002 avoids mixing Stage V TD 3.6 filters with Stage 3A 914 filters, or ordering a cabin GAR 30 kit for a canopy LE10 machine. After payment you receive the PDF immediately — no shipping delay — and you can open it on a workshop PC, tablet, or phone and print the exploded-view page you need at the bench.