FENDT NA Harvesting 5275 C – 6335 C Combines Operator’s Manual – PDF DOWNLOAD

Description

FENDT NA Harvesting 5275 C – 6335 C Combines Operator’s Manual – PDF DOWNLOAD

DESCRIPTION:

FENDT NA Harvesting 5275 C – 6335 C Combines Operator’s Manual – PDF DOWNLOAD

1.1 Information
1.1.1 Introduction

• Your new self-propelled combine is manufactured for harvesting seed and cereal crops, for threshing, separating, cleaning and conveying the grain into the tank and depositing the straw on the ground. This Operator’s Manual should be used as a practical reference guide: It contains all the necessary practical information for the operation, adjustment and maintenance
• of your new machine. Your combine was designed and built to ensure optimum performance, comfort and ease-of-operation in a wide variety of crops and conditions. The combine has been thoroughly inspected prior to delivery both at the factory and by your Dealer, to ensure you receive it in perfect condition. To keep the combine in perfect condition and to ensure
• trouble-free performance, the periodical maintenance operations listed in this manual should be carried out at the recommended intervals. Before operating and/or driving the combine, read this Operator’s Manual carefully, paying particular attention to the section on safety rules. Always keep this manual on hand for further reference.
• The terms “left” and “right” are always used with reference to the machine traveling direction. Should you require further information about the machine, please do not hesitate to contact your authorized Dealer. Your Dealer provides specially trained personnel, genuine spare parts and the required tools to solve any problems that may arise.

NOTE:

• This combine has been designed and built in compliance with the Machine Directive 2006/42/EC. A CE Declaration of Conformity is supplied with the machine (see specific chapter).
• This manual is published for worldwide distribution, and the availability of equipment shown as standard or optional varies according to the territory in which the combine is to be used. Specifications may differ from those contained in this Operator’s Manual according to the customer’s requirements
• In order to provide a better view of features or adjustments, certain illustrations in this manual may show an assembly with standard guards, or the guards required by law in different countries, open or removed.

DANGER:

• However, a machine should never be operated in this condition. For your own safety, always ensure all safety guards are fitted and closed correctly before operating the machine.
• This Operator’s Manual, along with the Operator’s Manuals provided for the power take-off shaft and the table trailer, must always be kept in the compartment under the operator’s seat for storage and convenient reference.

1.1.2 Company policy

In accordance with the Company’s policy of continuous improvements to its products, the Company reserves the right to modify and improve its products whenever necessary and to the required extent, without any obligation to apply such modifications to previously sold products. The information contained in this Manual refers to the current situation at the time it was written. All the data given may vary.

1.1.3 Optional equipment

Your machine was designed to operate in a wide variety of crops and conditions. However, in certain cases it may be necessary to fit additional accessories to improve machine performance or adapt the machine to harvesting special crops. A list of available accessories is provided in the chapter Optional equipment

1.1.4 Spare parts and accessories

• The genuine spare parts and accessories have been specifically designed for this type of machine. Only genuine parts supplied by your authorized Dealer can guarantee correct operation and optimum performance.
• Never use non-genuine spare parts or accessories: Some accessories (e.g. PTO shafts, straw choppers, tables) require an EC certification, which can be provided only by the manufacturer or his qualified and recognized sub-suppliers. Non-genuine spare parts have not been tested and are not authorized by the manufacturer. The use of such equipment may have a damaging effect on the design features of the machine and may even jeopardize operational safety.
• The manufacturer disclaims all liability in the event of loss or damage arising as a result of nongenuine parts or accessories being fitted. It is expressly prohibited to make any modification to the combine without the prior written authorisation by the manufacturer. When ordering spare parts and/or optional equipment, always quote your combine model and serial number (see chapter Combine identification).

1.1.5 Warranty

Your combine is warranted in compliance with the regulations in force in your country and the agreements made with your Dealer. However, the warranty becomes void in the following situations:

1. If the machine has been used inappropriately.
2.  If adjustments and maintenance have not been carried out according to the instructions in this manual.
3. If the failures are caused by the use of non-genuine spare parts or accessories.
4. If damage is the result of carelessness, negligence, inappropriate use of the machine or operational errors. If the safety devices are removed and/or non-genuine spare parts are used, the warranty becomes void automatically and the manufacturer disclaims any liability.

• The warranty applies only to repair or free replacement of parts proving defective after a careful inspection by the manufacturer (excluding wear parts and tires), as described in the Combine Service Record Book. In the event that warranted parts are replaced or repaired, warranty terms are not extended.
• The customer can assert his warranty rights only insofar as the warranty conditions contained in the Service Record Book have been observed.

1.1.6 Lubricants

Your Dealer can provide a wide range of special lubricants, produced according to the specific technical specifications of the combine. For these combines we recommend the use of the lubricants listed in the chapter Capacities and specifications of the section Lubrication and maintenance. Always use genuine AGCO parts, the only parts which bear this trademark:

TABLE OF CONTENTS:

FENDT NA Harvesting 5275 C – 6335 C Combines Operator’s Manual – PDF DOWNLOAD

1 General Information 15
1 1 Information 11
1 1 1 Introduction 17
1 1 2 Company policy 17
1 1 3 Optional equipment 17
1 1 4 Spare parts and accessories 18
1 1 5 Warranty 18
1 1 6 Lubricants 18
1 2 Use of the combine 20
1 3 Identification 22
1 3 1 Combine identification 22
1 3 2 Engine Identification 23
1 3 3 Cutting table identification 24
1 3 4 Operator seat identification 24
1 3 5 Hydrostatic pump identification 25
1 3 6 Hydrostatic motor identification 25
1 3 7 Straw chopper identification (if fitted) 26
1 3 8 Chaff spreader identification (if fitted) 26
1 3 9 Trailer hitch identification (if fitted) 27
1 4 Identification form 28
1 4 1 Machine data 28
1 5 Conformity 29
1 5 1 EC Declaration of Conformity 29
1 6 Information 30
1 6 1 Ecology 30
1 6 2 Hydraulic systems: hoses 30
1 6 3 Scrapping and disposal 31
1 7 Weight 32
1 7 1 Weight distribution 32
2 Safety 35
2 1 Warning symbols and safety instructions 37
2 1 1 Warnings 37
2 2 Information for road transport 38
2 2 1 Road transport 38
2 3 Information for operations 41
2 3 1 Field Operations 41
2 4 Information for maintenance 45
2 4 1 Maintenance work 45
2 5 Information on the engine 49
2 5 1 Engine 49
2 6 Leveling information 53
2 7 Safety and function decals 54
2 7 1 Location of decals 54
2 7 2 Description of decals 57
2 8 Work on the battery 69
2 8 1 Battery 69
2 9 Safety devices 70
2 9 1 Emergency exit 70
2 9 2
Operator presence device 71
2 9 2 1 Returning the machine to normal operation 72
2 9 3 Safety belts 73
2 9 4 Cutting table safety stops 74
2 9 5 Safety guard for main crop elevator 75
2 9 6 Sprags for wheels 75
2 9 7 Audible alarm for reversing 76
2 9 8 Reflectors for road transport 77
2 9 9 Safety Guards 78
2 9 10 Fall protection rails 78
2 9 11 Safety devices for operations to be carried out in the upper part of the machine 80
2 9 12 Straw chopper 81
2 9 13 Fire extinguisher 81
2 10 Trailer hitch 82
2 10 1 Automatic towing hooks 82
2 10 2 CUNA and CE trailer hitches 83
2 10 2 1 Procedure for attaching and removing 84
2 10 2 2 Drawbar coupling 85
2 10 3 ROCKING ER trailer hitch 85
2 10 3 1 Removal 85
2 10 3 2 Drawbar coupling 86
2 10 4 Fixed trailer hitch (non-automatic – CUNA type) 87
2 11 Machine lifting 88
2 11 1 Attachment points 88
2 12 Towing 89
2 12 1 Towing the combine 89
2 13 Further information 90
2 13 1 Noise level in the cab 90
2 13 2 Vibrations in the cab 90
2 13 3 Statutory regulations 90
2 13 4 Electromagnetic emissions 91
2 14 Notes 92
2 14 1 Notes for road transport 92
3 Operation 95
3 1 Combine operation 97
3 1 1 Crop processing 97
3 2 Stage 1 98
3 2 1 Feeding 98
3 3 Stage 2 99
3 3 1 Threshing 99
3 4 Stage 3 1 oo
3 4 1 Separation 100
3 5 Stage 4 101
3 5 1 Cleaning 101
3 6 Stage 5 102
3 6 1 Grain storage and unloading 102
3 7 Transmission 103
3 7 1 Rear-wheel drive 103
3 8 Leveling 104
3 8 1 Cross leveling 104
3 8 2 Cross and longitudinal leveling (FENDT 5275 C PLI model only) 104
4 Controls and Instruments 105
4 1 Steering column 109 156
4 6 16 8 Automatic height and Field pressure 157
4 6 16 9 Automatic height and Lateral flotation 159
4 6 16 10 Automatic height, Field pressure and Lateral floatation 159
4 6 16 11 Field pressure and Lateral floatation 160
4 6 17 Settings for harvesting specific crops 161
4 6 18 Levelling combine settings 162
4 6 19 Maintenance & calibration 163
4 6 19 1 Calibrations 164
4 6 19 2 Information on the management system 165
4 6 19 3 System setup 166
4 6 20 Error codes 169
4 6 21 Diagnostics 171
4 6 22 Meters 175
4 6 23 Display adjustment 176
4 6 23 1 Night-time screen brightness 177
4 6 23 2 Screen calibration 178
4 6 23 3 Cleaning the screen 179
4 6 24 Additional information 180
4 6 25 Camera 184
4 7 Cab 185
4 7 1 Main components 185
4 7 2 Air conditioning 186
4 7 2 1 Control unit 186
4 7 2 2 Compressor 187
4 7 2 3 Condenser 187
4 7 2 4 Expansion valve – evaporator 188
4 7 3 Pressurization and heating 188
4 7 4 Cab controls 190
4 7 4 1 Rear-view mirrors 194
4 7 5 Cab seats 195
4 7 6 Other cab components 197
4 7 6 1 Refrigerator 197
4 7 6 2 Document Pocket 197
4 7 6 3 Sun visor 198
4 7 6 4 Rear Cab Window 199
4 7 6 5 Reading light 199
4 7 6 6 Footrest 200
4 7 6 7 Preparation for radio installation 200
4 8 Access to combine components 201
4 8 1 Access to the operator platform 201
4 8 2 Access to and cleaning of the front windshield of the cab 202
4 8 3 Cleaning the rear-view mirrors 203
4 8 4 Cleaning the camera 204
4 8 5 Access to the engine compartment 204
4 8 6 Access to the grain tank 206
4 8 7 Access to the inside of the grain tank 207
4 9 Engine 208
4 9 1 Starting the engine 208
4 9 2 Useful advice 209
4 9 3 Stopping the engine 210
4 10 Road transport 211
4 11 Using the combine 214
4 11 1 Operations to be carried out before use 214
5 Field Operations 215
5 1 General Information 217
5 1 1 Notes 217
5 1 2 Before operating the machine in the field 217
5 2 Starting and Stopping the Combine 219
5 2 1 Procedure to follow 219
5 3 Cutting table 221
5 3 1 Attaching and removing the table 221
5 3 2 Table lateral floatation 225
5 4 Main Crop Elevator 227
5 4 1 Adjustments 227
5 4 1 1 Access to the main components 229
5 4 1 2 P F R – Finger feed roller 230
5 4 2 Reverse drive system 231
5 4 3 Stone trap 232
5 4 3 1 Stone trap assembly removal/refitting 233
5 5 Cylinder Housing 235
5 5 1 Threshing drum 235
5 5 1 1 Unblocking the cylinder 236
5 5 2 Concave 237
5 5 2 1 Concave filler plates 238
5 5 2 2 Parallelism between the cylinder and concave 240
5 5 2 3 Universal wheat/maize concave 241
5 5 2 4 Basic settings – universal concave 242
5 5 2 5 Spike-toothed Cylinder/Concave (for rice) 243
5 5 3 Rear beater 244
5 6 Multi-Crop Separator (MCS) 246
5 6 1 Operational description 246
5 6 2 Checking the concave position 247
5 6 3 Disengaging the Multi Crop Separator concaves 248
5 6 4 Multi Crop Separator speed 249
5 7 Straw walkers 251
5 7 1 Description and adjustments 251
5 8 Main Grain Pan 253
5 8 1 Description 253
5 8 2 Checking the main grain pan 254
5 8 3 Cleaning the main grain pan 254
5 9 Fanning Mill 256
5 9 1 Description and adjustments 256
5 9 1 1 Fanning mill for threshing light seed crops 258
5 10 Top sieve 259
5 10 1 Adjustment 259
5 11 Bottom sieve 263
5 11 1 Adjustment 263
5 12 Tailings 265
5 12 1 Description and adjustments 265
5 13 Grain tank 267
5 13 1 Description 267
5 13 1 1 Grain tank unloading auger 267
5 13 1 2 Sensors to check tank filling 268
5 13 1 3 Grain tank control window 269
5 13 1 4 Doors for Grain Tank Maintenance and Cleaning 270
5 13 1 5 Vertical auger tank drain door 271
5 13 1 6 Tank bottom door 271
5 13 1 7 Grain Tank Cover 272
Lubrication and Maintenance 277
6 1 General Information 279
6 1 1 Lubrication and Maintenance 279
6 2 Preliminary Service Inspection 281
6 2 1 After the first 50 working hours 281
6 3 Scheduled Service Inspection 282
6 3 1 Operation and adjustment 282
6 3 2 When and where to carry it out 283
6 3 3 Interval – 10 hours 288
6 3 3 1 Hydraulic and hydrostatic systems tank (1) 288
6 3 3 2 Engine oil (2) 289
6 3 3 3 Threshing drum variator (3) 290
6 3 3 4 Coolant expansion tank (4) 290
6 3 3 5 Prefilter/water separator (5) 291
6 3 3 6 Straw chopper rotor (6) 291
6 3 4 Interval – 50 hours 292
6 3 4 1 Rear axle support (11) 292
6 3 4 2 Table drive-belt tensioner (12) 292
6 3 4 3 Service brakes (13) 293
6 3 4 4 Cab air filters (14) 293
6 3 4 5 Fanning mill variator (15) 295
6 3 4 6 Coupling bushes of final drive shafts (16) 296
6 3 4 7 Rear-axle king pins (17) 297
6 3 4 8 Evaporator (18) 297
6 3 4 9 Condenser (19) 298
6 3 4 10 Engine radiator and hydraulic oil radiator (20) 299
6 3 4 11 Adjusting the rotary screen brushes and aspirator brushes 300
6 3 4 12 Grain-tank filling auger gearbox (21) 301
6 3 4 13 Track frames (22) 302
6 3 4 14 Rear straw walker shaft supports (23) 303
6 3 5 Interval – 100 hours 304
6 3 5 1 Unloading auger bottom gearbox (31) 304
6 3 5 2 Crop-unloading auger drive belt tensioner (32) 305
6 3 5 3 Main crop-elevator belt tensioner (33) 305
6 3 5 4 Chaff spreader drive (if installed) (34) 306
6 3 5 5 Crop unloading-auger control cylinder (35) 306
6 3 5 6 Main crop elevator adapter (36) 307
6 3 5 7 MCS belt tensioner (37) 307
6 3 5 8 Threshing-mechanism belt tensioner (38) 308
6 3 5 9 Hydrostatic-pump belt tensioner (39) 308
6 3 5 10 Cab access ladder (40) 309
6 3 5 11 Tires (41) 309
6 3 5 12 Main crop elevator supports (42) 310
6 3 5 13 Rear wheel 4WD tie rod (if fitted) (43) 311
6 3 5 14 Engine (44) 311
6 3 5 15 Engine air filter (45) 312
6 3 5 16 Front levelling (46) 313
6 3 5 17 Rear levelling control cylinders (FENDT 5275 C PLI model only) (47) 314
6 3 5 18 Cutting table levelling cylinders (48) 314
6 3 6 Interval – 250 hours 315
6 3 6 1 Gearbox (61) 315
6 3 6 2 Reduction gearbox (62) 315
6 3 6 3 Main clutch (63) 316
6 3 6 4 Unloading auger support (64) 316
6 3 6 5 Straw chopper driven-belt tensioner (65) 317
6 3 6 6 Straw chopper drive-belt tensioner (66) 317
6 3 6 7 Straw chopper idler shaft (67) 318
6 3 6 8 Tank unloading-auger clutch (68) 318
6 3 6 9 Aspirator drive-belt tensioner (69) 319
6 3 6 10 Rotary-screen belt tensioner (70) 319
6 3 6 11 Windshield wash fluid reservoir (71) 320
6 3 6 12 Engine oil and filters (72) 320
6 3 6 13 Tailing-auger left support (73) 323
6 3 6 14 Unloading-auger top angle gear (74) 323
6 3 7 Interval – 500 hours 324
6 3 7 1 Hydraulic systems oil (81) 324
6 3 7 2 Hydraulic and hydrostatic systems return filter (82) 325
6 3 7 3 Hydraulic-oil intake filter (83) 326
6 3 7 4 Hydrostatic transmission filter (84) 326
6 3 7 5 Engine diesel-fuel filters (85) 327
6 3 7 6 Dehydrator filter (86) 328
6 3 7 7 Catalytic fluid filter (87) 329
6 3 7 8 Reduction gears (88) 330
6 3 7 9 Gearbox (89) 330
6 3 7 10 Air compressor (if installed) (90) 331
6 3 7 11 Battery(91) 331
6 4 Periodical maintenance operations 332
6 4 1 Description 332
6 4 1 1 Engine valves (1) 332
6 4 1 2 Coolant (2) 334
6 4 1 3 Service brake circuit fluid (3) 335
6 4 1 4 Diesel fuel tank (4) 335
6 4 1 5 Turbocharger (5) 336
6 4 1 6 Hydraulic hoses (6) 337
6 5 Lubrication 338
7 Adjustments 341
7 1 Adjustments 343
7 1 1 Important information 343
7 2 Belt and chain adjustment 344
Combines
7 2 1 Belts and chains (left-hand side) 344
7 2 1 1 Feeder drive belt (1) 345
7 2 1 2 Threshing unit drive belt (2) 346
7 2 1 3 Multi-Crop Separator drive belt (3) 34 7
7 2 1 4 Unloading-auger drive belt (4) 348
7 2 1 5 Belt drive for hydrostatic pump (5) 349
7 2 1 6 Belt drive for chaff spreader (if fitted) (6) 350
7 2 1 7 Belt drive for reversing (7) 351
7 2 1 8 Main transmission belt (8) 352
7 2 1 9 Belt drives for good grain and tailings augers (9) 353
7 2 1 10 Belt drive for straw walkers (10) 353
7 2 1 11 Belt drive for cutting table (11) 354
7 2 1 12 Chain drive for unloading auger (12) 354
7 2 1 13 Belt drive for straw chopper (if fitted) (13) 355
7 2 1 14 Belt drive for straw chopper (if fitted) (14) 355
7 2 1 15 Air-compressor drive belt (if installed) (15) 356
7 2 1 16 Levelling pump drive belt (only on FENDT 5275 CPL- FENDT 6335 CPL
– FENDT 5275 C PLI models) (16) 357
7 2 2 Belts and chains (right-hand side) 358
7 2 2 1 Reel-pump drive belt (20) 358
7 2 2 2 Dust aspirator drive belt (21) 359
7 2 2 3 Rotary-screen drive belt (22) 359
7 2 2 4 Belt drive for engine coolant pump (23) 360
Drive belt for engine fan and alternator (24) 360
7 2 2 6 Belt drive for cylinder variator (25) 361
7 2 2 7 Belt drive for fanning mill variator (26) 362
7 2 2 8 Top chain drive for tailings auger (27) 363
7 2 2 9 Crop elevator chain (28) 363
7 2 2 10 Chain drive for tailings elevator (29) 364
7 2 2 11 Front crop elevator chain (30) 364
7 2 2 12 Finger-feed-roller drive chain (31) 365
7 2 2 13 Tank filling-auger drive chain (32) 365
7 2 2 14 Belt drive for cab air conditioning compressor (33) 366
7 3 Reverse drive system 367
7 3 1 Adjustment of control tie rod 367
7 3 2 Adjustment of the distance between disks 368
7 4 Slip clutches 369
7 4 1 Description 369
7 4 1 1 Clutch for main crop elevator upper shaft (1) 369
7 4 1 2 Clutch on finger feed roller (2) 369
7 4 1 3 Clutch for shaker shoe counter drive (3) 370
7 4 1 4 Shear bolt for unloading-auger counter drive (4) 370
7 5 Grain tank unloading auger 371
7 5 1 Adjustment of the support 371
7 6 Tires 372
7 6 1 Tire pressure 372
7 6 2 Replacement of Front Wheels 373
7 6 3 Replacement of Rear Wheels 375
7 6 4 Front and rear wheels assembly 377
7 7 Brakes 379
7 7 1 Service brakes 379
7 7 2 Park brake 380
7 7 2 1 Disengaging the brake 380
7 8 Rear axle 382
7 8 1 Toe-in setting 382
7 8 2 Steering ram ball joints 382
7 8 3 Width setting 383
7 8 4 Telescopic arm position 384
7 8 5 Rear axle support 386
7 9 Battery 387
7 9 1 Battery Replacement 387
7 9 2 Suggestions regarding the battery 387
8 Systems 389
8 1 Safety Precautions 391
8 1 1 Notes 391
8 2 Engine supply system 392
8 2 1 Permitted fuels 392
8 2 2 Fuel Circuit 393
8 2 3 Bleeding the Fuel Supply Circuit 394
8 2 4 Catalytic fluid tank (DEF) 395
8 2 5 Injection system operation 396
8 3 Engine air intake and exhaust system 398
8 3 1 Operation 398
8 4 Engine cooling system 401
8 4 1 Coolant 401
8 4 2 Engine cooling system operation 402
8 5 Engine lubrication system 403
8 5 1 Operation 403
8 5 2 Oil vapor recovery system 404
8 6 SCR system 405
8 6 1 Operation 405
8 7 Hydraulics system 408
8 7 1 Pumps and fuel tank 408
8 7 2 Table positioning hydraulic circuits 410
8 7 2 1 Cutting table oleopneumatic shock absorbers 411
8 7 2 2 Flow rate proportional valve 412
8 7 2 3 Hose burst valves 412
8 7 2 4 Table horizontal positioning circuit 413
8 7 3 Reel rotation control hydraulic circuit 414
8 7 4 Hydraulic steering system 415
8 7 5 Auxiliary hydraulics circuit 416
8 7 6 Leveling hydraulic circuit 417
8 7 6 1 Rear automatic levelling (only on FENDT 5275 C PLI model) 419
8 7 6 2 Manual leveling 420
8 8 Hydrostatic transmission system 421
8 8 1 Front-wheel drive 421
8 8 2 Rear-wheel drive 422
8 9 Electrical system 423
8 9 1 Main components 423
8 9 2 Computerized system 424
8 9 3 Fuses 425
8 9 4 Additional fuses 430
8 9 5 Relays 432
8 9 5 1 Additional relays 437
8 9 6 Control units 438
8 9 6 1 EXT control unit 438
8 9 6 2 ENEDC control unit 438
8 9 6 3 FTD1 control unit 439
8 9 6 4 FTD2 control unit 439
8 9 6 5 1/0 module (leveling) 440
8 9 6 6 Engine control unit 440
8 9 6 7 Engine sensors and control unit 441
8 9 7 Electric motors 442
8 9 7 1 Engine ignition control motor 442
8 9 7 2 Concave position control motors 442
8 9 7 3 MCS concave position control motor 443
8 9 7 4 Grain tank cover position control motor 444
8 9 7 5 Straw deflector control motor (if fitted) 444
8 9 7 6 Fanning mill variator control motor 445
8 9 7 7 Top sieve control motor 445
8 9 7 8 Lower sieve motor 446
8 9 8 Sensors 446
8 9 8 1 Forward speed sensor 446
8 9 8 2 Cylinder speed sensor 447
8 9 8 3 Fanning mill speed sensor 447
8 9 8 4 Reel speed sensor 448
8 9 8 5 Straw chopper speed sensor 448
8 9 8 6 Performance control sensors 449
8 9 8 7 Exhaust gas sensors 450
8 9 8 8 Returns control sensors 451
8 9 9 Electric connectors 451
8 9 10 Connections for diagnostics 454
8 9 11 Flashing lights 454
9 Troubleshooting 455
Description 457
9 1 1 Feeding 457
9 1 2 Threshing 457
9 1 3 Separation and cleaning 459
9 1 4 Hydrostatic Transmission 462
9 1 5 Engine 463
9 1 5 1 EEM4 engine troubleshooting (self-diagnosis) 465
9 1 5 2 Fault codes 465
9 1 6 Hydraulics system 477
9 1 7 Electrical system 4 79
9 1 8 Air conditioning circuit 479
9 1 9 Straw chopper 480
10 Off-Season Storage 483
10 1 Procedure to follow 485
10 1 1 Operations to be carried out after the harvest 485
10 1 2 Ordering spare parts 486
10 1 3 Operations to be carried out before the new season 486
11 Optional equipment 489
11 1 Information 491
11 1 1 General considerations 491
11 2 Optional equipment 492
11 2 1 Four-wheel drive 492
11 2 2 Windbreak 492
11 2 3 Additional lights 493
11 2 4 Additional lights for flip-up maize headers 494
11 2 5 Additional fire extinguisher 494
11 2 6 Diesel fuel filter 495
11 2 7 Air compressor for maintenance 496
11 2 8 Weight and moisture control monitor 497
11 2 9 Multimedia navigation system 497
11 2 10 Trailer hitch 498
11 2 11 Vertical Knifes 498
11 2 12 Cylinder cover 499
11 2 13 Tailings cover plate 499
11 2 14 Top sieve 500
11 2 15 Bottom sieve 501
11 2 16 Auto-Guide 502
11 2 17 AGCOMMAND 502
11 3 Equipment for threshing 503
11 3 1 Equipment for maize 503
11 3 2 Equipment for corn-cob 505
11 3 3 Equipment for rice 505
11 3 4 Equipment for light seed crops 506
11 3 5 Equipment for soya and peas 506
11 4 Ballast weights 507
11 4 1 Description 507
11 4 2 Ballast weights on rear axle 508
11 4 3 Ballast weights on the straw walker hood for machines without straw chopper 509
11 4 4 Ballast weights on the rear wheels with a liquid mix (for tubeless tires) 510
11 4 5 Filling tires with anti-freeze solutions 511
11 5 Straw chopper 512
11 5 1 Electrically operated straw chopper straw deflectors 512
11 5 2 Transport position 512
11 5 3 Working position 513
11 5 4 Operating the straw chopper 515
11 5 5 Disengaging the straw chopper 516
11 5 6 Access to the straw chopper rotor 516
11 5 7 Straw chopper rotor knives 517
11 5 8 Counter-knives 518
11 5 9 Chopping quality 518
11 5 10 Use of straw chopper in maize 519
11 6 Chaff Spreader 521
11 6 1 Working and maintenance positions 521
11 6 2 Chaff spreader speed 523
11 6 3 Disengaging the chaff spreader 523
11 6 4 Chaff spreader belt tensioning 523
11 7 Tracks 524
11 7 1 Use and maintenance 524
11 7 2 Track chain tension 525
12 Technical Specifications 527
12 1 Wheels and tires 529
12 1 1 information 529
12 1 2 Wheel tightening torque 529
12 1 3 Tire capacity 529
12 1 4 Front tire equipment 530
12 1 5 Rear tire equipment 533
12 1 6 Ballast weights 534
12 2 Dimensions 535
12 2 1 Combine dimensions 535
12 2 2 Clearance between unloading auger and table 542
12 3 Technical specifications 543
12 3 1 Feeding unit 543
12 3 2 Threshing sys 543
12 3 3 Cleaning unit 549
12 3 4 Grain tank 550
12 3 5 Hydraulic system 551
12 3 6 Hydrostatic system 551
12 3 7 Engine 552
12 3 8 Electrical components 553
12 3 9 Transmission 553
12 3 10 Rear axle 555
12 3 11 Weight 555
13 Index 557
1 1 Information 17
1 1 1 Introduction 17
1 1 2 Company policy 17
1 1 3 Optional equipment 17
1 1 4 Spare parts and accessories 18
1 1 5 Warranty 18
1 1 6 Lubricants 18
1 2 Use of the combine 20
1 3 Identification 22
1 3 1 Combine identification 22
1 3 2 Engine Identification 23
1 3 3 Cutting table identification 24
1 3 4 Operator seat identification 24
1 3 5 Hydrostatic pump identification 25
1 3 6 Hydrostatic motor identification 25
1 3 7 Straw chopper identification (if fitted) 26
1 3 8 Chaff spreader identification (if fitted) 26
1 3 9 Trailer hitch identification (if fitted) 27
1 4 Identification form 28
1 4 1 Machine data 28
1 5 Conformity 29
1 5 1 EC Declaration of Conformity 29
1 6 Information 30
1 6 1 Ecology 30
1 6 2 Hydraulic systems: hoses 30
1 6 3 Scrapping and disposal 31
1 7 Weight 32
1 7 1 Weight distribution 32
Combines

IMAGES PREVIEW OF THE MANUAL:

Need help? Contact: [email protected]

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

S.m