Fendt Variable Chamber Baler 4160 V 4160 V Xtra 4180 V 4180 V Xtra Operator’s Manual – PDF DOWNLOAD

Description

Fendt Variable Chamber Baler 4160 V 4160 V Xtra 4180 V 4180 V Xtra Operator’s Manual – PDF DOWNLOAD

DESCRIPTION:

Fendt Variable Chamber Baler 4160 V 4160 V Xtra 4180 V 4180 V Xtra Operator’s Manual – PDF DOWNLOAD

1.2 Safety Instructions

• YOU are responsible for the SAFE operation and maintenance of your machine.
• YOU must make sure that each person who operates or does work on the machine understands all the SAFETY data in this manual.
• YOU are the key to safety. Good safety procedures prevent accidents to you and each person near you. Make these procedures a set part of your safety sequence.
• Make sure that EVERYONE who operates, does maintenance or works near to the machine obeys the safety precautions.

Follow the safety sequence to prevent the risk of injury or death:

• Owners must complete training with all operators before they operate the machine. This training must be done a minimum of each year
• The operator must read, understand and obey all safety and operation instructions in the manual
• A person who did not read and understand all safety and operation instructions must not operate the machine
• Do not change the equipment. Adjustments not approved by the manufacturer can change the function of the machine and cause damage or personal injury
• Only use approved replacement parts and make sure that only approved technicians do the repair procedures.

1.2.1 General Safety

• • Read and understand the manual and all safety decals, before you operate the machine
• Follow all safety regulations, in this manual and instructions or warnings shown on the machine
• Only use the machine for its correct operation
• Only approved persons that understand the operator manual, can operate, drive and do maintenance on the machine
• Keep persons and objects away from parts that move
• Make sure that the installation of all the safety guards and protection devices is correct and they operate correctly
• Always use a tractor with a cabin. Make sure that you close the cabin of the tractor during operation to decrease the quantity of sound. High quantity of sound can cause reduction in hearing
• Always keep a minimum distance of 3 m (10 ft) between the machine and electrical power lines, specially when you open the tailgate
• Know that the height of the machine is up to 3.50 m (11.5 ft) and with an opened tailgate 4.28 m (14.04 ft), depending on specifications and installed tyres
• Put on the correct protective clothing and equipment (gloves, safety glasses and ear protectors)
• Look for hazards and signs of defects (leakage and noise)
• Keep the safety decals clean to make sure that you can see them at all times. Replace safety decals that are missing or you cannot see
• Know the telephone number for emergency medical help in your area
• Speak to your local dealer, if you are not sure of one or more items
• Only connect the machine to the tractor using the procedures in this manual. Only connect the machine to a tractor trailer hitch with your local regulations approval
• Make sure that the front axle weight of the tractor is sufficient. Make sure that you do not have more weight than the maximum permitted on the rear axle
• Do not connect the machine to the tractor when the tractor engine is in operation
• Release the pressure from the hydraulic system before you connect or disconnect the hydraulic hoses. Refer to the manual of the tractor
• If the machine has a pneumatic or hydraulic brake, connect the brake hose(s) to the tractor
• Make sure that all safety guards and protection devices are in position
•  Do not remove a blockage by hand or by foot. Always use an applicable tool.

TABLE OF CONTENTS:

Fendt Variable Chamber Baler 4160 V 4160 V Xtra 4180 V 4180 V Xtra Operator’s Manual – PDF DOWNLOAD

1 Safety 7
1.1 Safety Icons 9
1.2 Safety Instructions 10
1.2.1 General Safety 10
1.2.2 Safe Driving 11
1.2.3 Public Road Transport Safety 11
1.2.4 Safe Maintenance 11
1.2.5 Safe Operation 12
1.2.6 Fire Prevention 12
1.3 Safety Decals 14
1.4 Safety Devices 21
1.4.1 Tailgate Safeguard 21
1.4.2 Set the Tailgate Safeguard 21
1.4.3 Remove the Tailgate Safeguard 21
1.4.4 Hydraulic Shut-off Valve 21
1.4.5 Net Knife Safeguard 22
1.4.6 Install the Net Knife Safeguard 22
1.4.7 Remove the Net Knife Safeguard 22
1.4.8 Pick-up Safeguard 22
1.4.9 Safety Chain (optional) 23
1.5 Danger Zones 24
2 Introduction 25
2.1 Preface 27
2.1.1 Manual Contents 27
2.1.2 Vehicle Identification Number (VIN) and VIN Plate 27
2.2 Intended Use 30
2.2.1 The Machine 30
2.2.2 Correct Use 30
2.2.3 Known Misuse 30
2.3 Description 31
2.3.1 General Overview 31
2.3.2 Drawbar 31
2.3.3 Device to Stop Use Without Approval 32
2.3.4 Main Drive Shaft 32
2.3.5 Hydraulic System 32
2.3.6 Pick-up Unit 33
2.3.7 Feed Rotor 33
2.3.8 Cutting Unit 33
2.3.9 Feed Channel Floor 34
2.3.10 Bale Chamber 34
2.3.11 Tying Unit 34
2.3.12 Bale Ejector 34
2.3.13 Tailgate 34
2.3.14 Pivoted Roller 34
2.4 Controllers 36
2.4.1 E-Link Pro 36
2.4.2 E-Link Control 37
2.5 E-Link Pro Software 39
2.5.1 Home Page E-Link Pro and ISOBUS 40
Table of contents
Variable Chamber Baler
1764.FT.EN01
2.5.2 Bale Adjustments Page 43
2.5.3 Field Data Page 44
2.5.4 Tasks Page 45
2.5.5 Advanced Menu 45
2.6 E-Link Control Software 50
2.6.1 Home Page 51
2.6.2 Bale Adjustment Page 54
2.6.3 Field Data 55
2.6.4 Tasks Page 55
2.6.5 Advanced Menu 55
3 Operation 61
3.1 First Use 63
3.1.1 Calculate the Maximum Permitted Vertical Load on the Coupling Point 63
3.1.2 Calculate the Maximum Permitted Horizontal Load on the Coupling Point 63
3.1.3 Adjust the Height of the Drawbar 63
3.1.4 Adjust the PTO Shaft 64
3.1.5 To Prepare Before You Connect the Power Supply 65
3.1.6 Connect the Hydraulics 66
3.1.7 Prepare the Chain Lubrication System 66
3.1.8 Adjust the Net Roll Holder 66
3.1.9 Setup the E-Link Pro Display 67
3.1.10 Set the Language on the E-Link Control 69
3.2 Connect the Machine to the Tractor 70
3.2.1 Connect the Machine to the Tractor 70
3.3 Transport Position and Driving 72
3.3.1 Apply or Release the Parking Brake 73
3.3.2 Place or Remove the Wheel Chocks 74
3.3.3 Drain the Air Container of the Pneumatic Brake System 74
3.4 Prepare the Machine to Bale 75
3.4.1 Adjust The Height of the Pick-up 75
3.4.2 Adjust the Height of the Wind Guard 76
3.4.3 Pull out the Bale Ejector Tubes 76
3.4.4 Put in the Wrapping Material 76
3.4.5 Insert a Net Roll 77
3.4.6 Insert the Net 78
3.4.7 Move the Pivoted Roller to the Start Position 80
3.4.8 Twine Tying (optional) 80
3.4.9 Thread the Twine 81
3.4.10 Set the Twine Brake 82
3.4.11 Set the Edge Clearance 83
3.4.12 Set the Wrapping Distance 83
3.4.13 Set the Wrap on the Edge 83
3.4.14 Insert the Knives 84
3.4.15 Adjust the Machine Settings on the Control 84
3.4.16 Open or Close the Side Covers 85
3.5 To Operate the Machine 86
3.5.1 Check Before You Operate the Machine 86
3.5.2 Start Baling 86
3.5.3 Drive Instructions for Material Intake 87
3.5.4 Large Swath 87
3.5.5 Small Swath 87
3.5.6 Drive on Slopes 89
3.5.7 Dry, Brittle, Smooth Crop Material 89
3.5.8 Eject a Bale 89
3.5.9 Remove a Blockage (machine with Hydroflexcontrol) 90
3.5.10 Manually Remove a Blockage (machine without Hydroflexcontrol) 91
Table of contents
Variable Chamber Baler
1764.FT.EN01
3.5.11 Shut Down Procedure on the Field 92
3.6 Disconnect the Machine from the Tractor 94
3.6.1 Park the Machine 94
3.6.2 Remove the Pressure from the Hydraulic System 94
3.6.3 Disconnect the Machine 94
3.6.4 Support Foot 95
3.6.5 Install the Support Foot 96
3.6.6 Remove the Support Foot 96
3.6.7 To Move the Machine without Brakes 96
3.6.8 Take the Machine out of Operation 97
4 Maintenance and Lubrication 99
4.1 Preventive Maintenance Schedule 101
4.2 Lubrication Chart 103
4.3 Clean the Machine 107
4.4 Grind the Cutting Unit Knives 108
4.4.1 Remove the Knives 108
4.4.2 Grind the Knives 109
4.4.3 Install the Knives 109
4.5 Replace the Knives with Blind Knives 110
4.5.1 Remove the Knives 110
4.5.2 Install the Blind Knives 111
4.6 Lubricate the Tailgate and Tensioning Arm Rollers 112
4.6.1 Loosen the Belts 112
4.6.2 Lubricate the Rollers 112
4.6.3 Tighten the Belts 112
4.7 Adjust the Disk Brake of the Net Tying Unit 114
4.8 Adjust the Shock Absorbers 115
4.9 Chain Lubrication System Maintenance 116
4.9.1 Check the Level in the Oil Container of the Chain Lubrication 116
4.9.2 Fill the Oil Container 116
4.9.3 Bleed Air from the Lubrication Pump 117
4.10 Tighten the Chains of the Pick-Up, Bale Chamber and Feed Rotor 118
4.11 Examine the Hydraulic Hoses for Damage and Leaks 120
5 Troubleshooting 121
5.1 Manually Remove a Blockage From the Feed Channel Floor (machine
with Hydroflexcontrol) 123
5.2 Prevent Bales of Unusual Shape 124
5.3 Replace a Transport Wheel 125
6 Specifications 127
6.1 Specifications 129
6.1.1 Dimensions 130
6.2 Shipment 131
6.2.1 Lift the Machine 131
6.2.2 Attach the Machine to a Truck 131
6.3 Disposal 133
7 Index 135
IMAGES PREVIEW OF THE MANUAL:

FENDT VARIABLE CHAMBER BALER 4160 V 4160 V XTRA 4180 V 4180 V XTRA OPERATOR’S MANUAL – PDF DOWNLOAD:

PLEASE NOTE:

• This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
• You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
• Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted

S.M