Fendt TWISTER Tedder 7706 DN Operation Manual PDF Download

Description

Fendt TWISTER Tedder 7706 DN Operator’s Manual – PDF DOWNLOAD

DESCRIPTION:

Fendt TWISTER Tedder 7706 DN Operator’s Manual – PDF DOWNLOAD

1.1 Introduction

1.1.1 Applicability of the Operator’s Manual

This Operator’s Manual applies exclusively to machines starting from the serial number specified on the cover of this manual. The serial number of the machine can be found underneath “Machine number” on the sign plate.

1.1.2 Storage of documentation
Procedure

During use: Keep the operating instructions and all applicable documents available in the tractor cab.

1.1.3 Other applicable documentation

Note all of the operating instructions that accompany the components of the machine.
• The operating instructions for the cardan shafts

TABLE OF CONTENTS:

Fendt TWISTER Tedder 7706 DN Operator’s Manual – PDF DOWNLOAD

1 Safety 5
1.1 Introduction 7
1.1.1 Applicability of the Operator’s Manual 7
1.1.2 Storage of documentation 7
1.1.3 Other applicable documentation 7
1.1.4 Warning notices in the Operator’s Manual 7
1.1.5 Contents of the sign plate 7
1.1.6 Position of the sign plate 8
1.1.7 EU Declaration of Conformity 8
1.2 Safety instructions 10
1.2.1 Intended use 10
1.2.2 User qualifications 10
1.2.3 Warning notices on the machine 10
1.2.4 Protective work wear 10
1.2.5 Maintenance work 11
1.2.6 Working with hydraulics 11
1.2.7 Work in the vicinity of high-voltage power lines 11
1.2.8 Structural changes and extensions 11
1.2.9 What to do in an emergency 12
1.2.10 Fire prevention 12
1.2.11 Keeping safety equipment fully functional 12
1.2.12 Risk of damage to the machine 12
1.2.13 Shutting off the machine 13
2 Description and technical data 15
2.1 Machine description 17
2.1.1 Machine components 17
2.1.2 Machine positions 17
2.1.2.1 Transport position 17
2.1.2.2 Working position 17
2.1.2.3 Headland position 17
2.1.2.4 Parking position 18
2.1.3 Decals 18
2.1.3.1 Overview of warning notices on the machine 18
2.1.3.2 Notices on the machine 19
2.1.4 Special equipment 19
2.2 Technical data 20
2.2.1 Machine data 20
2.2.2 Weight and dimensions 20
2.2.3 Gyro 20
2.2.4 Rotor chassis tires 20
2.2.5 Contact wheel tires 20
2.2.6 Noise information 21
2.2.7 Tightening torques 21
3 Operation 23
3.1 Initial start-up 25
3.1.1 Assembling the machine 25
3.1.2 Shortening the transmission shaft 25
3.2 Using the machine 27
3.2.1 Attaching the machine 27
3.2.1.1 Start-up 27
3.2.1.2 Changing category for three-point attachments 27
3.2.1.3 Coupling the lower link 28
3.2.1.4 Coupling the top link 29
3.2.1.5 Coupling the upper link (contact wheel) 29
3.2.1.6 Swivelling the support leg on the three-point headstock upward 30
3.2.1.7 Pushing the support leg on the rotor upward 31
3.2.1.8 Fitting the transmission shaft 32
3.2.1.9 Fitting the transmission shaft (night swath gear) 32
3.2.1.10 Connect the hydraulics 33
3.2.1.11 Connect the hydraulics (hydraulic edge spreading device) 33
3.2.1.12 Connect the hydraulics (3-way cock) 33
3.2.1.13 Lay the pull ropes 33
3.2.1.14 Connect the lighting 34
3.2.2 Driving the machine on public roads 34
3.2.3 Switching the machine to working position 34
3.2.4 Put machine into working position (3-way valve) 35
3.2.5 Using the machine 35
3.2.5.1 Spreading 36
3.2.5.2 Turning 36
3.2.5.3 Using the machine at the end of the field 36
3.2.5.4 Using the machine at the end of the field (3-way cock) 37
3.2.5.5 Edge spreading 37
3.2.5.6 Edge spreading (hydraulic edge spreading device) 38
3.2.5.7 Edge spreading (3-way cock) 38
3.2.6 Switching the machine to transport position 38
3.2.7 Put machine into transport position (3-way cock) 39
3.2.8 Machine storage 40
3.2.9 Adjusting the machine 42
3.2.9.1 Adjusting working height 42
3.2.9.2 Adjusting working height (contact wheel) 43
3.2.9.3 Setting the scatter angle with bracket 44
3.2.9.4 Setting the swing brake 44
3.3 Decommissioning 46
3.3.1 Storing the machine 46
3.3.2 Dispose of the machine 46
4 Troubleshooting and maintenance 47
4.1 Rectifying faults 49
4.1.1 Irregular rotor function 49
4.1.2 Spread pattern is uneven 49
4.1.3 Swath is formed 49
4.1.4 Machine rocks back and forth when working 50
4.1.5 Wheels grind when cornering on sward 50
4.1.6 Cracking noises in centre gearbox 50
4.1.7 Checking machine after hitting an obstacle 50
4.2 Maintenance 51
4.2.1 Maintenance schedule 51
4.2.2 Cleaning the machine 52
4.2.3 Servicing the hydraulics 52
4.2.4 Checking oil level in the gearbox 53
4.2.5 Lubricate 53
4.2.5.1 Lubrication schedule 53
4.2.5.2 Lubricating the hinge pins 54
4.2.5.3 Lubricate the double lever 54
4.2.5.4 Lubricating the rotor drive 55
4.2.5.5 Lubricating the rotor bearings 55
1.1 Introduction 7
1.1.1 Applicability of the Operator’s Manual 7
1.1.2 Storage of documentation 7
1.1.3 Other applicable documentation 7
1.1.4 Warning notices in the Operator’s Manual 7
1.1.5 Contents of the sign plate 7
1.1.6 Position of the sign plate 8
1.1.7 EU Declaration of Conformity 8
1.2 Safety instructions 10
1.2.1 Intended use 10
1.2.2 User qualifications 10
1.2.3 Warning notices on the machine 10
1.2.4 Protective work wear 10
1.2.5 Maintenance work 11
1.2.6 Working with hydraulics 11
1.2.7 Work in the vicinity of high-voltage power lines 11
1.2.8 Structural changes and extensions 11
1.2.9 What to do in an emergency 12
1.2.10 Fire prevention 12
1.2.11 Keeping safety equipment fully functional 12
1.2.12 Risk of damage to the machine 12
1.2.13 Shutting off the machine 13

IMAGES PREVIEW OF THE MANUAL:

VIDEO PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

S.M