Grove RT765E-2 Crane Parts Manual 2012 – Serial Number 232673 PDF

Description

Grove RT765E-2 Parts Manual – Serial Number 232673 (2012)

This Grove RT765E-2 crane parts manual was published for machine serial number 232673 and carries the March 29, 2012 date with revision 002. It is the full parts catalog for that machine: exploded-view illustrations of every serviced assembly, each drawing numbered to a table that gives the part number, the quantity required and the component description. For anyone maintaining, repairing or rebuilding an RT765E-2, this Grove RT765E-2 parts manual is the shortest route from spotting a part on the machine to holding the number you need to order it. The whole document is roughly 995 pages and covers the superstructure, the carrier and the appendices that make part look-up fast.

File Details

• Manual type: Parts manual (parts catalog with exploded-view illustrations and part-number tables)
• Brand: Grove (Manitowoc Cranes)
• Model: RT765E-2
• Serial number: 232673
• Revision: 002
• Date: March 29, 2012
• Language: English
• Page count: approximately 995 pages
• File format: PDF

Chapters Covered

• Boom – boom assembly, 6.00 inch bore tele cylinders, boom pivot shaft installation, weight and chain assembly, sheave installations, wear pad kit, boom kit 2 over 4, Nylatron sheave assembly, 60 T hookblock, overhaul ball assembly, boom light switch, 3/4 inch open wedge socket, LMI boom kit (iFLEX 2), roller guide assembly, junction box, A2B flag assembly, connector assembly, dummy plug
• Swivel assembly – hydraulic, water, electric and A/C swivel, 14-port swivel, slip ring assembly 20 conductor with slew
• Control valves – directional control valve, pressure reducing valve with solenoid, dual accumulator charge valve, residual check valve
• Wire rope
• Bearing bolt installation
• Hydraulic lines installations – lift (superstructure), main and auxiliary hoist, tele (superstructure), LMI (superstructure), swing, steer (cab), brake (cab), carrier rear steer, front steer, rear axle, axle disc and park brake, supply pressure and return (superstructure and carrier), lift cab
• Hoist installation – main only, GHP30A hoist assembly, binder installation
• Beacon light installation, mirror installation (hoist), iFLEX 5 LMI kit installation
• Air conditioning – installation (superstructure), A/C lines kit, vertical mount condenser, carrier air conditioning installation, freon compressor 12V with pad mounting, A/C hose kit carrier
• Valve cover components installation
• Electrical system installation (superstructure) and superstructure harness assembly
• Lift cylinder installation – 12.00 inch bore lift cylinder, 3/4 holding valve assembly
• Hoist access platform (superstructure and counterweight components)
• CraneStar installation (superstructure), TCU and satellite antenna kit
• Swing hydraulic lines installation (superstructure)
• Superstructure cab – cab assembly (12V), cab sub-assembly, glass door assembly, sliding skylight assembly, side RH and rear window assemblies, wiper kits (skylight and front, 12 volt), 12 volt cab fan, 12V heater installation, heater/cool kit
• Cab brackets installation, pedal group installation, treadle valve (swing brake), brake pedal valve, acoustics installation, control seat installation and assembly (single axis without auxiliary hoist), proximity switch assembly, single axis controller, handle assembly with solenoid, seat harness, heater and A/C control panel, plastic covers, pin lock cable, drive controls, steering column with cluster, steering control valve
• Electrical system installation (cab) – fuse and relay panel, cab overhead panel, front console panel, interior cab harness, overhead cab panel harness, front panel cab harness
• Rear cab cover installation, 360 pedal cover installation, cab grab handle rework, grab handle installation, cab installations-components
• Carrier – carrier frame complete, frame, outrigger beam installation and assembly, 4.50 jack cylinder assembly, outrigger extension cylinder assembly, 2 1/2 inch O/R extension cylinder assembly, fender installation, engine hood installation, outrigger float stowage installation, outrigger float assembly, exterior lights installation, tie down installation (hook block), rear view mirror installation, step installation
• ESI carrier and harness assembly
• Hydraulic reservoir installation and assembly, hydraulic return filter assembly, washer bottle installation
• Hydraulic valve installation (carrier without differential) – outrigger control 4-section valve, outrigger selector valve, double solenoid valve, park brake range shift valve, motor control manifold, flow adjustable valve, fan bypass valve
• Hydraulic lines installation – carrier (outrigger), supply pressure and return (carrier), high speed boost valve assembly, rear axle, front steer, axle disc and park brake line
• Outrigger controller installation and right-hand assembly, cable assembly
• Rear axle installation without differential (HDB) – rear drive steer axle without differential lock, 3 1/2 inch steer cylinder, 5 inch lockout cylinder, differential carrier group, housing assembly group, hub and shaft group, brake group, brake assembly group
• Front axle installation with standard differential – front drive steer axle without differential lock (HDB), 4.00 steer cylinder, parking brake assembly, differential carrier group, housing assembly group, hub and shaft group
• Tire and wheel installation (29.5 x 25 General), tire and wheel assembly, wheel assembly
• Driveline installation – coupling shaft, drive line assembly, front lower slip shaft
• Engine installation and engine assembly – coolant level sensor, fuel filter, oil filter, primary and secondary air filters, V-ribbed drive belt
• Transmission assembly – converter housing group, case, rear cover, drive plate, turbine shaft, turbine/impeller, pump drive, forward and reverse gear, reverse and high shaft, forward and 2nd shaft, low shaft, idler shaft, output shaft, regulator and charge pump mounting, pressure regulator, charge pump assembly, electric control and cover, electric control cartridge valve, high and low shift control
• Two-section gear piggyback pump assembly, counter-clockwise rotation pump assembly, pump assembly
• Electrical system installation (Tier 3 engine), engine harness assembly, engine cable kit
• Charge air cooler (CAC) installation, CAC assembly, charge air cooler assembly
• Exhaust cover installation, exhaust system installation (Tier 3), air intake installation (Tier 3), air cleaner assembly
• Oil cooler installation and hydraulic/transmission oil cooler assembly
• Block heater installation (QSB 240V)
• Radiator installation and radiator assembly
• Fuel tank and step installation (Tier 3), fuel tank assembly, oil cooler mounting kit
• Battery box installation, battery cable kit, fuse panel assembly, engine relay panel harness
• Decals – standard installation, standard cab, standard carrier, standard superstructure, standard boom, nomenclature, RT765E-2 decal installation, foreign standard decal installation, supplemental decal installation, hardware kit (decal)
• Appendices – alphabetical index, numerical index, recommended spare parts list, belt and filter maintenance list, foot note index

Read as a whole, the RT765E-2 parts manual is a single continuous index of the machine. The superstructure side runs from the boom nose back through the pivot shaft, the swivel, the control valve stack and the hoist, then into the cab electrical and climate systems. The carrier side starts at the frame and outrigger beams, moves through the axles and driveline, and finishes with the engine, transmission, cooling pack and fuel system. Each group is self-contained: an illustration you can point at, and a table that turns the callout into an orderable part number.

How the Grove RT765E-2 Parts Manual Is Organised

Every assembly in this Grove RT765E-2 crane parts manual follows the same pattern. An exploded-view drawing is printed first, with each component tagged by a reference number. The table that follows repeats those reference numbers in order and lists the part number, the quantity used per assembly, and the description. Sub-assemblies are broken out again as separate groups where the manufacturer sells them individually, so a cylinder, a valve stack or a differential carrier can be ordered either whole or by internal component.

Where a group has been revised, the illustration notes the sheet number and revision letter so you can confirm you are looking at the correct breakdown for serial 232673. Three indexes at the back of the document – alphabetical, numerical and a recommended spare parts list with one, two and three year recommendations – let you work from a description or from a part number you already have in hand.

What a Grove RT765E-2 Parts Manual Does That a Service Manual Cannot

A service manual tells you how to remove something. This Grove RT765E-2 parts manual tells you what it is made of. That difference matters the moment a job turns into a rebuild rather than a replacement: a leaking tele cylinder, a worn swing box, a scored brake disc or a cracked outrigger pad all need individual components, and the component numbers only exist in a parts breakdown like this one.

Because the manual is tied to a single serial number, the assemblies shown are the ones fitted to that machine rather than a generic range. Hydraulic line routings, harness assemblies, axle configurations and decal sets are all presented in the variant that matches this build, which removes the guesswork that comes with parts look-ups against a broad model listing. Whether the task is a boom wear pad change, a hoist seal kit, an outrigger cylinder reseal, a steering valve overhaul or simply a decal that has weathered off, the numbers are in here.

Get the Right Grove RT765E-2 Part the First Time

Ordering the wrong crane part costs more than the part. It costs the downtime while the wrong item is returned, the second freight charge, and the schedule slip on the job. Working from the correct Grove RT765E-2 crane parts manual for serial number 232673 means every number you write on a requisition can be checked against the same illustration the part came off, so the counter or the supplier gets it right the first time.

IMAGES PREVIEW

This Grove RT765E-2 parts manual arrives as an instant PDF download once payment clears – no shipping, no waiting on a printed binder, no damaged pages. Open it on a laptop in the workshop, a tablet on the machine, or a phone in the parts store, and print the sheets you need for the job in front of you. Keep the file on the service truck and the look-up is available wherever the crane is parked.