Terex RT 880 M Crane Parts Manual – Illustrated Boom, Hoist, Turntable & Outrigger Component Catalog

Description

Terex RT 880 M Crane Parts Manual – Complete Illustrated Component Catalog

This is the full parts manual for the Terex RT 880 M rough terrain crane, dated 24/04/2010. It is the illustrated component catalog for the machine, covering every major assembly – the four-section boom, cab, hoist group, turntable, axles, outriggers, engine and transmission, hydraulic lines and electrical system. Each listing gives the part number, description, quantity and figure reference so you can identify exactly what you need before you order it.

File Details

• Manual type: Parts manual / illustrated component catalog
• Brand: Terex
• Model: RT 880 M
• Publication date: 24/04/2010
• Language: English
• Format: PDF
• Page count: 439

Chapters Covered

• Boom Group – four-section boom assembly, cylinder support installation, tele cylinder, holding valve, pivot shaft, boom nose sheave installation with and without lattice, sheave assemblies, O/S boom extension, multi offset swing-away boom extension assembly, boom nose assembly, auxiliary boom nose, O/S tele extension, multi offset tele boom extension, stinger fly assembly, mounted roller assembly, jib cable roller assembly, boom extension bracket installation, roller assembly, pivot hook block assembly, 15 T hook block, headache ball assembly, hoist rope, wedge and socket assembly
• LMI Installation – Kruger MK 4E/2 SLI, console MK 4E/2, central unit 24V, hydraulic pressure sensors, length and angle sensor cable, A2B switch, clamp blocks
• Cab Group – cab installation, cab assembly, cab sub assembly, steering unit installation and steering unit, swing brake pedal and valve installation, throttle and brake pedal installation, brake valve with treadle, throttle valve with pedal, front console installation and assembly, harness installation and assembly for front console, control and seat installation, cab mounted mirror installation, rear view mirror installation, cab fan 12V, A/C installation and hydraulic piping for the A/C cab
• Control Valve & Linkage Group – control valve installation (super), V/G valve assemblies, pressure reducing valve, accumulator charge valve, D.C. valve
• Hoist Group – hoist unit installation, hoist unit, hydraulic lines installation for main hoist
• Turntable Group – turntable weld and bearing installation, boom pivot bushing assembly, counterweight installation with and without lattice, hydraulic and electric swivel installation and assembly, 11-port hydraulic swivel, 6-port hydraulic and air swivel assembly, electrical swivel with centre post weld, fittings for hydraulic swivel, hose reel installation and assemblies, slew lock pin assembly, slew unit installation and slew unit, hydraulic lines installation for lift, tele inner mid, tele outer, tele fly, free slew and throttle, S/P and R hydraulic lines installation, test panel installation, elevation/swing warning installation, counterweight plate installation, bearing bolt installation, lift cylinder installation, cylinder assembly, overcenter valve assembly
• Engine & Transmission Group – engine, transmission and pump installation, engine assembly (reference only), transmission assembly, single-section gear pump, three-section gear pump, pump, air cleaner installation, exhaust installation, radiator and water piping installation, transmission filter, throttle cylinder, electrical system installation for carrier, harness assembly for carrier, junction box installation, electrical system installation for superstructure, harness assembly for superstructure
• Drive Line Group – drive line installation, propeller shaft, rear slip shaft, prop shaft
• Axle Group – front axle installation, axle drive steer front, rear axle installation, axle drive steer rear, steer cylinder, lockout cylinder, rear steer indicator installation, front steer hydraulic line installation for carrier, rear steer hydraulic line installation, rear axle lockout hydraulic lines for carrier, service brake hydraulic lines installation, axle disconnect and park brake hydraulic line, tyre and wheel rim installation
• Outrigger Group – outrigger installation, outrigger assembly, outrigger jack assembly, vertical outrigger with sun valve, outrigger extension cylinder, control valve installation for carrier, double solenoid valve 12V, Racine stack valve, integrated outrigger valve, 4-way solenoid valve, solenoid valve 4-wheel drive, outrigger pad and storage installation, outrigger hydraulic lines installation
• Frame Group – fuel tank installation, hydraulic reservoir installation and assembly, tank mounted filter, hydraulic tank cover installation, fender and battery box installation, engine hood and pump cover installation, battery installation, S/P and R hydraulic lines installation for carrier, suction pipe installation, pressure and return line installation, hydraulic lines installation for front steering, decal installation for RT880, battery isolation switch installation, exterior lights installation, back-up alarm installation, audio visual warning system, hook block tie down installation, tool box and ladder installation, cab hydraulic lines installation, radiator sealing installation, tool kit assembly, oil cooler installation, hydraulic oil cooler, tow hook installation front, fire extinguisher installation, washer assembly, beacon lamp assembly, slew alarm installation

Across these eleven groups the document provides the full parts identification layer for the RT 880 M – not a repair guide, but the illustrated catalog a workshop or parts department uses when a component has to be replaced or ordered. Every assembly is drawn as an exploded figure with a numbered parts list beneath it, and items such as wear pads, bushings, sheaves, seal kits, hydraulic fittings, hoses, valves and swivel seals are all individually itemised so a single small part can be traced back to its assembly rather than having to buy a larger unit.

What This Manual Enables You To Do

The value of a factory parts catalog for a machine like the Terex RT 880 M is that it removes guesswork from ordering. A crane of this class stays in service for decades, and the parts behind the boom, hoist, outrigger and axle assemblies are exactly the ones that wear, leak or need replacing. With this catalog you can look up the assembly, find the item number on the illustration, and read off the part number, description and quantity directly – which is the difference between getting the right part first time and ordering by description alone.

Several areas of the manual go deeper than a simple parts list and are genuinely useful on the shop floor:

• The hydraulic line installation chapters (main hoist, lift, tele inner mid, tele outer, tele fly, free slew and throttle, S/P and R lines, outrigger lines, front and rear steer lines, service brake lines, and axle disconnect / park brake lines) show how each circuit is routed and which adapters, elbows, tees and hoses are used where.
• The turntable group includes the 11-port hydraulic swivel, the 6-port hydraulic and air swivel and the electrical swivel with centre post – each broken down into seals, quad rings and split bearings so a leaking swivel can be resealed rather than replaced.
• The axle and drive line groups cover the front and rear drive-steer axles in detail – differential carrier, housing, hub and shaft, brake groups and planetary assemblies – with every bearing, seal, shim and cap screw listed.
• The outrigger group covers the vertical outrigger with sun valve, the extension cylinder, the integrated outrigger valve, Racine stack valve and 4-wheel-drive solenoid valve, along with the hydraulic lines and pads.
• The LMI section documents the Kruger MK 4E/2 SLI including console, central unit, pressure sensors, length and angle sensor cable and clamp blocks.

Why This Catalog Matters On A Machine Like The RT 880 M

Rough terrain cranes live in tough conditions and the RT 880 M is no exception. Boom wear pads, sheave bearings, swivel seals, hydraulic hoses and outrigger components all eventually need attention, and the part number on the illustration is what keeps the machine serviceable. Ordering without a part number risks picking the wrong variant – the RT 880 M has separate boom nose sheave installations for machines with and without lattice, separate counterweight installations depending on configuration, and multiple V/G valve assemblies under the same control valve group – so being able to match the part to the exact figure in the manual is what prevents a wasted purchase.

For a fleet running more than one RT 880 M, the catalog also supports inventory planning: you can build a stock list from the wear items in the boom, hoist, outrigger and axle groups and know each item’s correct number in advance. For a single owner it means being able to walk into a parts counter, quote the number and description, and get the right component the first time. The exploded views are also useful for reference during a rebuild, because they make the assembly order and the fasteners for each joint clear.

Get Instant Access To The Terex RT 880 M Crane Parts Manual

IMAGES PREVIEW

The Terex RT 880 M Crane Parts Manual is delivered as an instant PDF download after checkout – no shipping, no waiting, no physical copy to lose in the workshop. You can open it on a laptop, tablet or phone, search for a part number, and print the pages you need for the job at hand. Whether the task is a single wear pad replacement, a boom section re-seal, a hoist winch overhaul, an outrigger cylinder reseal, a swivel seal change, or tracing an LMI or hydraulic fault back to the right component, this catalog gives you the part numbers, quantities and illustrations to work from.

Having the RT 880 M parts manual on file is the difference between guessing at a part and knowing it. It keeps the machine serviceable, cuts downtime, and prevents the wrong-part orders that slow down a repair. Order today and download the full illustrated catalog immediately.