Hitachi Zaxis 200-3 and 210 Series Parts Catalog PDF Download

Description

The Hitachi Zaxis 200-3 and 210 Series Parts Catalog PDF is the complete illustrated parts reference for the ZAXIS 200-3, 210H-3, 210LC-3 and 210LCK-3 hydraulic excavators. Every assembly and sub-assembly is documented with exploded-view illustrations and itemized part numbers, giving you the exact visual and numerical information needed to identify, verify and order the right components for your machine.

This parts catalog covers the whole excavator from the engine and hydraulic system through the upperstructure, undercarriage, cab and front-end attachment. Whether you are rebuilding a travel device, replacing pilot piping, sourcing a control valve, ordering bucket teeth or tracking down a single O-ring, the exploded diagrams show how each part fits and which number applies. It is the reference you keep open when the machine is apart and a part must be identified correctly the first time.

File Details

• Manual type: Illustrated Parts Catalog
• Brand: Hitachi
• Models covered: ZAXIS 200-3, 210H-3, 210LC-3, 210LCK-3
• Engine referenced: ISUZU AI-4HK1XYSA-02
• Language: English and Chinese (bilingual)
• File format: PDF
• Page count: Approximately 435 pages

Chapters Covered

The catalog follows the machine group by group. Each section contains an exploded-view illustration with item numbers cross-referenced to a parts table showing part number, description, quantity per machine and service codes. The main groups include:

• Frame — main platform, piping, step, covers
• Boom Foot Pin — pin, block, plate, bolt, washer
• Center Joint Parts (Upperstructure) — stopper, bolt, cover boot
• Counterweight — 4.3t and 4.7t, rubber, cap, washer, bolt
• Engine — ISUZU AI-4HK1XYSA-02, fan belt, alternator, sensors (crank, cam angle, coolant temp, oil pressure, boost pressure), thermo switch, wire harness
• Engine Support — rubber mounts, right and left brackets, spacers, U-nuts, clips
• Oil Filter Piping — oil hoses, adapters, O-rings, clips, oil filter and element
• Intercooler Piping — air pipes, hose clamps, air hoses
• Radiator — radiator core, cap, oil cooler, inter cooler, nets, brackets, plugs, rubber seals, collars, bolts, packings, nuts
• Radiator Support — bolts, clamps, water hoses, rubber, band, lock, bracket, vinyl hose, washers
• Radiator Cover — covers, rubber seals, trim seals, bolts
• Reserve Tank — water tank, cap, name-plate, clamps, vinyl hose, water hose
• Air Cleaner — cleaner assembly, outer and inner elements, cover, valve, indicator, gasket, adapter, name-plate
• Air Cleaner Support — hose clamps, bolts, air duct, duct clamps
• Air Cleaner Parts — duct, bolts
• Muffler — muffler, U-bolts, nuts, bracket, gasket, exhaust pipe, U-nuts, clamps, tube, rubber bushing, clip
• Fuel Tank — fuel tank assembly, strainer, float, cap, packing, ball valve, adapters, screws, plugs
• Fuel Tank Support — bolts, washers
• Fuel Piping — fuel hoses, tubes, clips, cooler, pump, gaskets, strainer, fuel filter, elements, plugs, O-rings, brackets
• Pump Device — pump assembly
• Pump Device Support — bolts, spring washers, plain washers
• Swing Device — swing device assembly
• Swing Device Support — bolts, washers, knock pins
• Oil Tank — oil tank, O-rings, bolts, spring, cover, bracket, breather, element, nut, cap, level gauge, seal, sensor, gasket, suction filter, strainer, plugs, adapters, elbows, filter element, ring, valve
• Oil Tank — same structure with additional indicator, clip, wire harness
• Suction Piping — rubber hose, hose clamps, adapters, O-rings, suction pipe, manifold, bolts
• Delivery Piping — hoses, split flanges, O-rings, socket bolts, clamps, rubber, bracket
• Return Piping (1) — retaining ring, valve, O-rings, couplings, seal rings, plugs, socket bolts, pipe clamps, brackets, return pipes
• Return Piping (2) — socket bolts, coupling, seal ring, plug, O-ring, pipe clamp, return pipe
• Drain Piping — adapters, O-rings, elbows, clips, hoses
• Main Piping (1) — pipe clamps, bolts, seat, pipe, split flanges, O-rings, socket bolts, brackets, hoses
• Main Piping (2) — split flanges, O-rings, socket bolts, hose assemblies, hoses, protectors
• Main Piping (3) — split flanges, O-rings, socket bolts, hoses, valve
• Main Piping (4) — split flanges, O-rings, socket bolts, adapters, hose assemblies, hoses, protectors
• Boom Bottom Piping — pipe, socket bolts, split flange, O-ring
• Side Branch Piping — brackets, plug, bolts, hoses, O-ring, split flange, socket bolt
• Control Lever (Front, Swing) — bolts, washers, spring pins, shafts, grips, nuts, clips, boot, washers, pilot valve (assembly and transportation types)
• Control Lever (Front, Swing) [EU] — same with EU-specific grips
• Control Lever (Travel) — socket bolts, washers, levers, grips, nuts, foot rests, covers, pedals, pilot valve
• Lock Lever — bracket, ball bearing, spacer, shim, washer, retaining ring, spring, switch, screws, rubber stopper, nut, lock lever, grip, cover, cap
• Control Valve — control valve and control valve
• Control Valve Support — brackets, bolts, washers, spacers
• Solenoid Valve — solenoid valve assembly
• Pilot Piping (A) — oil filter, element, adapters, O-rings, elbows, pipes, fittings, clips, bolts, socket bolts, hoses
• Pilot Piping (B) — adapters, O-rings, clips, bolts, hoses, elbows
• Pilot Piping (C) — plastic hoses, adapters, O-rings, elbows, pipes, pressure sensor, hoses
• Pilot Piping (D-1) — shuttle valve, bracket, socket bolts, washers, bolts, adapters, O-rings, elbows, hoses, pressure sensors
• Pilot Piping (D-2) — adapters, O-rings, hoses, clips, bolts, pressure sensor
• Pilot Piping (E) — elbows, O-rings, hose clamps, bolts, plastic hoses
• Pilot Piping (F) — lock valve, bolts, pipe fittings, O-rings, pipes
• Pilot Piping (G) — plastic hoses, elbows, O-rings, hose clamps, bolts, brackets, bushings, hoses, wire clamps, bands
• Pilot Piping (H) — plastic hoses, elbows, O-rings, bushings, hoses, wire clamps, bands
• Pilot Piping (I-1) — hoses, pipe, nylon hose, adapters, O-rings, tees, plugs, elbows, bands
• Pilot Piping (I-2) — pipes, plastic hoses, adapters, O-rings, tees, fittings, elbows, bolts, clamps, hoses, clips
• Pilot Piping (J) — plugs, O-rings, adapters, elbows, hoses, plastic hoses
• Console — console assemblies, bolts
• Console Cover — covers, pockets, tapping screws, screws, caps, name-plates
• Right Cover — covers, louver, bolts, screws, cap, ashtray, holders, tapping screws
• Radio — brackets, screws, feeder, radio
• Electric Parts (A) — batteries, battery cables, bolts, brackets, cover, hook bolts, wing nuts, spacers, nuts, washers, battery relay, relay, clips
• Electric Parts (B) — screws, spring washers, wire harness, head lamp (assembly and transportation), lens, frame, bulb, gasket, washers, nuts
• Electric Parts (C) — wire harness, fusible links, nuts, washers, bands, clips, brackets, relays, thermo sensor, pressure sensor
• Electric Parts (D) — monitor, brackets, screws, tapping screws, wire harness, clip
• Electric Parts (E) — wire harness, fuse box, fuses, puller, cover, relay box, diodes, clips, bolts, screws, relays, buzzer, controller, brackets, rubber bushing, bands
• Electric Parts (E) (HTC) — bands, clips, cover, screws, horn
• Boom Light Harness — wire harness
• Engine Control Unit — controller, bracket, bolts, cover
• Engine Stop Switch — switch, clip, bolt
• GSM Parts — controller, brackets, screws, electronic adjust unit, wire harness, band
• Horn — nuts, washers, wire harness, horns
• Rear Camera Less Parts — cover, bolts, cap
• Window Washer — window washer assembly, tank, motor, bracket, bolts
• Air Conditioner (1) — aircon unit, filter, bolts, controller, screws, water hoses, joint pipe, clamps, rubber bushing, hoses, wire harness, clip, ducts, washers
• Aircon Unit — case, cover, evaporator, valve, O-rings, bolts, cap, lining, motor, washer, air hose, thermostat, resistor, transistor, seal, tapping screws, door, lever, rod, sensor, rubber bushing, filter, heater core
• Air Conditioner (2) — bolts, brackets, washers, hoses, clips, pulley, V-belt, spring washers, bands
• Air Conditioner (3) — hoses, bolts, clamps, tapping screws, clips, bands
• Air Conditioner (4) — compressor, sensor, condenser, dryer, bolts
• Heater Piping — hose clamps, clips, bolts, water hoses, tubes
• Duct — duct, screws, filter, bracket, bolts, tapping screws
• Rear Box (Air-Con) — cover, tray, cap, duct, rubber bushing, screws, bolts, lighter, rubber
• Cab — cab assembly with sub-components
• Cab — cab assembly with sub-components
• Cab (1) through Cab (8) — individual cab section breakdowns
• Cab Group (1) and (2) — cab group assemblies
• Door — door assembly
• Anchor Bolt — anchor bolt
• Cab Mirror — cab mirror
• Sunvisor [EU] — sunvisor
• Front Head Lamp (Cab) [EU] — front head lamp
• Rear Head Lamp (Cab) [EU] — rear head lamp
• Rotating Beacon (Upper Cab) [EU] — rotating beacon
• Floor Plate — floor plate
• Floor Parts (1) and (2) — floor components
• Seat — seat assembly
• Seat Stand — seat stand
• Floor Mat — floor mat
• Cover (1) through Cover (7) — machine covers including anti-slip versions
• Door Lock — door lock
• Engine Cover — engine cover
• Under Cover — under cover and under cover
• Tool Box Cover — tool box cover and anti-slip version
• Track Frame — track frame and track frame
• Track Guard (X2) and (X4) — track guards
• Step — step
• Additional Step — additional step
• Track Under Cover (OPT) and — track under covers
• Swing Bearing — swing bearing
• Swing Bearing Parts — swing bearing components
• Travel Device — travel device
• Travel Device Support — travel device support
• Front Idler — front idler
• Adjuster — adjuster
• Upper Roller — upper roller
• Lower Roller — lower roller
• Track Link , , — track links
• Center Joint — center joint
• Center Joint Support (Track) — center joint support
• Travel Piping and — travel piping
• Travel Motor Cover — travel motor cover
• H Boom — H boom
• H Arm 2.91m , , — H arms
• Extension Arm — extension arm
• Link A — link A
• Link B , , — link B
• Front Piping — front piping
• Lubricate Piping — lubricate piping
• Boom Cylinder (R) and (L) — boom cylinders
• Arm Cylinder — arm cylinder
• Bucket Cylinder and — bucket cylinders
• Bucket 0.51m³ (JIS 94) for extension arm
• H Bucket 0.8m³ (JIS 94)
• H Bucket 0.91m³ (JIS 94)
• H Bucket 1.0m³ (JIS 94)
• H Bucket 0.8m³ [JIS 94]
• Breaker & Crusher Parts — main piping (1), (2), (3), pilot piping, control pedal, boom piping, arm piping, relief valve, HSB common piping
• Name-Plate (1), (2), (3) and [EU] (R) versions
• Tools — tool list
• Parts Index — alphabetical parts index

This level of coverage means the Hitachi Zaxis 200-3 and 210 Series Parts Catalog is not just a list of numbers. It is a complete visual guide to how the machine is built. The exploded views show the relationship between parts, the assembly sequence, and the hardware that holds everything together. The parts tables give you the exact quantity required per machine, and the service codes flag parts that require special handling — whether that means dealer consultation, on-site machining, or inclusion in a service kit.

For anyone maintaining or repairing a ZAXIS 200-3, 210H-3, 210LC-3 or 210LCK-3, this catalog eliminates the guesswork from parts ordering. Instead of describing a part over the phone or hoping a generic listing matches, you can point to the exact item number on the exploded view and order with confidence. The bilingual English and Chinese presentation also makes it accessible to a wider range of readers and workshops.

What This Parts Catalog Enables

With this Hitachi Zaxis 200-3 and 210 Series Parts Catalog PDF on hand, you can:

• Identify any component on the machine using the exploded-view illustrations and item numbers
• Order the correct part number the first time, reducing downtime and return shipping costs
• Verify that the part you have matches the part the machine requires
• Understand how assemblies are put together before disassembly begins
• Check quantities per machine so you order enough fasteners, seals, and hardware
• Read service codes to know when a part requires dealer involvement or cannot be replaced individually
• Cross-reference replacement part numbers and interchangeability notes where applicable
• Navigate the full machine quickly through the group-based contents and parts index

The catalog is organized so you can move from the contents page to the exact group you need. Each group starts with an illustration page, followed by the parts table. The ten-digit product identification number format used in the serial number column lets you confirm that the part applies to your specific machine, and the modification date codes (D, H, F) tell you when a part changed during production. The replaceable part column shows what will be supplied if you order a part with an interchangeability code, so there are no surprises when the shipment arrives.

Whether you are a workshop technician, a fleet maintenance manager, or an owner-operator who does their own repairs, this parts catalog gives you the same parts identification information used in the field. It covers the engine, the entire hydraulic system, the swing and travel components, the undercarriage, the cab and its electrical and climate systems, the front-end attachment, and the optional breaker and crusher piping. The buckets and attachment sections include multiple sizes and JIS specifications, so you can order the right digging tool for the job.

Why It Matters

Parts catalogs are often the difference between a repair that goes smoothly and one that drags on because the wrong component arrived. Hydraulic fittings, O-rings, seals, and hardware can look similar but have different part numbers and specifications. The Hitachi Zaxis 200-3 and 210 Series Parts Catalog removes that ambiguity. It shows you exactly which O-ring goes with which adapter, which bolt goes with which bracket, and which seal ring belongs to which coupling. That precision is valuable whether you are resealing a control valve, replacing a pilot hose, or rebuilding a travel motor.

The exploded views also serve as a disassembly and reassembly guide. When you can see how the parts stack together, you know the order they come apart and the order they go back together. That reduces the risk of missed spacers, reversed seals, or forgotten washers. For complex assemblies like the swing device, the travel device, the control valve, or the air conditioner unit, that visual reference is indispensable.

Because the catalog covers multiple models in the ZAXIS 200-3 and 210 series, you can use it across a fleet. The serial number and model notations help you confirm which parts are common and which are specific to the 200-3, 210H-3, 210LC-3, or 210LCK-3. The inclusion of both standard and variants for certain groups means you can work on machines with different specifications without needing a separate catalog.

IMAGES PREVIEW

Instant PDF Delivery

This Hitachi Zaxis 200-3 and 210 Series Parts Catalog is delivered as an instant PDF download after payment. There is no shipping, no waiting for a physical book, and no risk of a damaged or lost package. You can download it immediately and access it on any device — laptop, tablet, or smartphone. The PDF format lets you zoom in on exploded views, print the pages you need for the workshop, and keep the full catalog on hand wherever you work. Whether you are in the shop, in the field, or ordering parts from the office, the information is available the moment you need it.