HYVA HC801 Articulated Boom Crane Spare Parts Catalogue 7880746 PDF

Description

HYVA HC801 Articulated Boom Crane Spare Parts Catalogue — Logbook Code 7880746.0

This HYVA HC801 spare parts catalogue covers the 2 Articulated Boom HC801 crane in full: the base and full basement, slewing assemblies, column, first and second boom, every extension from the 1st through the 10th, the articulated jacks and hydraulic cylinders that drive them, the stabiliser and outrigger hydraulics, control valves, wireless control kits, oil tank, filtration, heat exchange units, winch attachment and the HC801 JIB 6S. Each functional group is presented as its own table — an exploded illustration with numbered callouts, followed by a parts list giving position number, table code, variant, quantity and description.

The crane was built in several extension configurations, and the parts lists mark which variant a component belongs to. That is what makes this catalogue usable across the whole HC801 range rather than for a single build.

File Details

• Manual type: Spare parts catalogue
• Brand: HYVA CRANE
• Machine: 2 Articulated Boom HC801
• Logbook code: 7880746.0
• Language: English, with Italian annotations on several tables
• Page count: 174
• File format: PDF
• Dated validity notes: valid from August 2011; valid until July 2011; valid until November 2012; valid from April 2014 (as printed on the individual tables)
• Ordering reference format: RE 217XXXX 17, where 17 is the year and XXXX a progressive number

How the Parts Tables Work

Every table in this HYVA HC801 spare parts catalogue carries a table code in its header together with a page fraction, for example 5420084-1.01/2. The illustration uses the same position numbers that appear in the left-hand column of the parts list, so a component is traced in two steps: find the number on the drawing, then read across the table for its table code, variant, quantity and description.

The opening instruction page states plainly that the table code is an internal reference used to organise the catalogue and must not be used to order spare parts from the restricted area of the website. Order confirmations instead quote an RE reference in the form RE 217XXXX 17. Both rules are reproduced in the catalogue and worth reading before the first order is placed.

Chapters Covered

• Plate kit (Generic Gru) — standard instructions sticker and stabilizer connecting rod label
• Plate kit (Version) — model HC 801 decal sets, groups 2 through 7
• Base, full basement, adjusters, inserts, hooks and backlash plates
• Slewing assembly (2 engines) and slewing assembly (3rd engine)
• Come revolving electrohydraulic
• Rotation control (EN12999-A3)
• Stability control (EN12999-A3)
• Load indication system (RDC-EBB) and EBB – EN 12000 – A3
• Controls with thermopharmable (RDC EBB-X)
• Controls (RDC EBB-X TCU-ECM), tables 1 through 7
• Wireless control kit (Hz EU / Hz USA / Hz AUS)
• Wireless control kit (RDC-EBB-FR. EU-)
• Wireless control kit (CAN BUS) and pilot lamp
• Control devices locking for outriggers legs
• Stabilizer connecting rods extra-extensible
• Hydraulic system extra-extensible (stabiliser ram)
• Hydraulic system (stabiliser ram) and stabiliser ram B.I.
• Stabilizer hydraulic jack and stabilizer control valve
• Controls (stabilizers standard) and hydraulic system (controls for stabilizers)
• Control valve (4 section) and controls
• Hydraulic oil tank, oil filter, high pressure filter, clogging indicator
• Heat exchange unit (12V) and heat exchange unit (24V)
• Column and column connecting rods
• Lifting hydraulic cylinder (hydraulic system)
• 1st boom, linkage 1st and 2nd boom
• 2nd boom
• Articulation hydraulic jack (hydraulic system)
• 1st extension and 1st extension hydraulic (hydraulic system)
• 1st extension hydraulic cylinder
• 2nd extension, 2nd extension hydraulic jack, coupling (hook)
• 2nd extension hydraulic cylinder
• 3rd extension and 3rd extension hydraulic jack
• 3rd and 4th extension hydraulic cylinder
• 4th extension and 4th extension hydraulic jack
• 5th extension and 5th extension hydraulic jack
• 5th, 6th and 8th extension hydraulic cylinder
• 6th extension and 6th extension hydraulic jack
• 7th extension and 7th extension hydraulic jack
• 8th extension and 8th extension hydraulic jack
• 9th extension and 9th extension hydraulic jack
• 9th and 10th extension hydraulic cylinder
• 10th extension and 10th extension hydraulic jack
• Manual extension (1st) and manual extension (2nd)
• Actuations for
• Attachment for winch and winch kit
• Guide rope kit
• Winch (hydraulic system)
• Assembly kit
• HC801 JIB 6S group
• Attachment for (JIB) and JIB arm
• Kit connecting rod (JIB)
• Articulation hydraulic jack (internal) and (external)
• Hydraulic system (articulation hydraulic jack)
• 1st extension (JIB) and 1st extension hydraulic (JIB)
• 1st and 2nd extension hydraulic cylinder (JIB)
• 2nd extension (JIB) and 2nd extension hydraulic jack
• 3rd extension hydraulic jack and 3rd and 4th extension hydraulic cylinder
• 4th extension hydraulic jack
• 5th extension hydraulic jack and 6th extension hydraulic jack
• Coupling (articulated extension)
• Kit activation hydraulic input (articulated extension)
• Support (articulated extension)

Read end to end, the catalogue follows the load path of the machine. It starts at the sticker and decal plates, moves down into the base plate, slewing ring and gear motors, crosses to the outrigger legs and their locking devices, then climbs the column and booms through all ten powered extensions and the manual sections. Alongside that mechanical spine sit the systems that make the crane work: the rotation and stability control groups, the RDC-EBB load indication system, the hydraulic tank and filtration circuit, the heat exchange units, the pilot lamp and the wireless control kits in EU, USA and Australian frequencies. A separate block at the end is dedicated to the HC801 JIB 6S, with its own attachment, arm, connecting rod kit, internal and external articulation jacks and its own extension hydraulics. For a technician rebuilding or resealing a section, the value is that the drawing, position number and part code sit on the same page — no cross-referencing a second document.

Validity Notes by Machine Serial Number

Several assemblies in this catalogue carry validity boxes tied to the machine serial number rather than to a build year. The slewing and stabiliser ram tables list separate validity columns for S/N 26822, S/N 99248 and S/N 200346, and other tables carry date-based notes such as valid from August 2011, valid until July 2011, valid until November 2012 and valid from April 2014. Checking the serial number and the printed validity note before quoting a part avoids ordering a rod unit, seal kit or mounting plate that fits a different build of the same HC801.

What This HYVA HC801 Spare Parts Catalogue Lets You Do

With the correct exploded table open, identifying a component stops being guesswork. You can trace a hydraulic jack back to its cylinder assembly and then down to the individual seals, wipers, O-rings, anti-extrusion rings, close nipples and pistons that make it up — the 2nd extension hydraulic jack, the 4th extension hydraulic jack and the 5th, 6th and 8th extension hydraulic cylinder tables all break down to that level. On the mechanical side, the extension and manual extension tables list the sliding blocks, slide shoes, buttons, adjusters, ring nuts, pins, cotter pins and locking rings that take the wear, so a boom that has developed play can be assessed against the actual parts that control it.

The electrical and control side is covered too: the wireless control kit tables itemise joysticks, selectors, emergency stop push buttons, battery chargers, aerials, belts and display units, and the CAN-BUS tables distinguish between the 12V and 24V solenoid options and the different lever kit generations. The plate kit tables identify which sticker set belongs to which model variant, useful when a machine has been repainted or rebadged.

IMAGES PREVIEW

Instant PDF Delivery

The catalogue is supplied as a PDF and is available immediately after checkout — no shipping, no waiting for a parcel, and no restriction on where you open it. It reads on a laptop, tablet or phone in the workshop, on the bench or at the machine, and any table can be printed and taken to the job if you prefer paper in front of you.

Ordering the wrong part costs more than the part. Having the HYVA HC801 spare parts catalogue on hand means the position number, the table code and the variant are confirmed before the order goes in — whether you are resealing a single extension jack, replacing a sliding block on the 7th extension, or working through the HC801 JIB 6S from the attachment through to the final hydraulic jack.