Kuhn FB2130 Fixed Chamber Baler Spare Parts List ZRA103TL B 2011 Multilingual PDF

Description

Kuhn FB2130 Fixed Chamber Baler Spare Parts List – ZRA103TL B

This is the illustrated spare parts list for the Kuhn FB2130 fixed chamber baler, issued under catalogue reference ZRA103TL B. It cancels and replaces the earlier ZRA103TL A edition and applies to machines from serial number VGJB000924 onward, with the parts pages headed for the 2011 model year. The document runs to 140 pages of exploded assembly drawings paired with itemised parts tables, and every designation is printed in four languages so the same page can be read by an English, French, German or Italian speaker without cross-referencing a second book.

If you maintain, repair or rebuild an FB2130 baler, this is the document that tells you which component belongs where, how many of each are fitted, and what number to quote when you order. A Kuhn FB2130 spare parts list is not a workshop manual – it contains no repair procedures, torque sequences or fault diagnosis – but it is the reference that makes every other job possible, because nothing wastes more time in a workshop than ordering the wrong bearing, chain link or seal.

File Details

• Manual type: Illustrated spare parts list (parts catalogue)
• Brand: Kuhn
• Machine: FB2130 fixed chamber baler (presse a chambre fixe / Pressen mit fester Kammer)
• Catalogue reference: ZRA103TL B – cancels and replaces ZRA103TL A
• Serial applicability: VGJB000924 and above
• Model year shown: 2011
• Languages: English, French, German, Italian
• Length: 140 pages
• Format: PDF

How the Parts Book Is Organised

The catalogue is split into numbered parts groups. Each group opens with an exploded illustration where every component carries a reference number, followed by a table listing that number against the designation, the Kuhn part number, the quantity required and, where relevant, a remark. The tables run four columns of description side by side – Designation, Description, Bezeichnung and Referenza – so the same line gives you the French, English, German and Italian name of the part.

Group headers on each parts page also repeat the machine identity, the serial threshold and the drawing reference (for example Z40R0082 A, Z40R0125 A, Z40R0237 A, Z40R0247 A), which makes it straightforward to confirm you are reading the correct edition for your baler before you commit to a part number.

Chapters Covered

• Carter / Housing
• Transmission
• Transmission 4500412
• Bequille de dépose / Parking stand
• Attelage (équipement) / Connecting frame (equipment)
• Timon / Drawbar
• Roue – essieu / Wheel – axle
• Freins – essieu / Brakes – axle
• Roues / Wheels
• Frein de stationnement / Parking brake
• Frein hydraulique / Hydraulic brakes
• Freinage pneumatique / Pneumatic brake (three groups)
• Cadre central / Main frame
• Relevage hydraulique / Hydraulic lift (two groups)
• Rouleaux (entraînement) / Rollers (drive) (three groups)
• Rouleau de fin / End roller
• Palier / Bearing (lubrication)
• Dispositif de lubrification / Lubrication system
• Tendeur de chaîne / Chain tightener (three groups)
• Chaîne Profi / Chain Profi
• Roue (fixed) pick-up / Wheel (fixed) pick-up
• Roue (pivoting) pick-up / Wheel (pivoting) pick-up
• Pick-up rouleau / Pick-up roller
• Pick-up (2.30 m)
• Rotor
• Rotor 14-OC
• Plancher (14-OC) abaissement / Floor (14-OC) drop
• Disp. de coupe 14-OC / Cutting device 14-OC
• Hydraulique (rotor)
• Hydraulique pick-up
• Hydraulique (14-OC)
• Levier / Lever
• Lieur à ficelle / Twine tie system
• Patins / Skids
• Boîte à ficelle / Box twine
• Guide (ficelle) / Guide (twine)
• Lieur à filet / Net wrap set (three groups)
• Protecteur (latéral, avant, arrière) / Safety guards
• Protecteur 14-OC / Safety guards 14-OC
• Éclairage – signalisation / Lighting equipment (rear)
• Dispositif de lubrification / Lubrication system
• Huile (moteur hydraulique) / Oil (hydraulic motor)
• Boîtier de commande (Autoplus) / Control box
• Capteur – faisceau électrique / Sensor – wiring harness
• Étiquettes adhésives / Stickers (Kuhn, safety, instructions)
• Documentation
• Sortie balles / Balls out

Across those groups the parts list covers the full mechanical build of the machine: the main frame and its guarding, the drawbar and connecting frame, the complete axle and brake package including the hydraulic and pneumatic braking circuits, the drive line from the transmission and PTO shaft through the chain cases to the drive rollers, the chain tensioner assemblies, the pick-up with both its fixed and pivoting wheels, the rotor and 14-OC rotor variants with the drop floor and cutting device, the twine tie system and the net wrap set with their respective guides and boxes, the lubrication system and its pump, the lighting and rear signalling equipment, the electrical sensor and wiring harness layout, and the decal and safety sticker placement. Hardware is not skipped either – every bolt, washer, circlip, roll pin, grease nipple and locking nut appears with its own part number and finish code.

Quoting the Right Number First Time

Parts tables in this catalogue separate components that look almost identical on the machine but differ by a millimetre, a tooth count or a material specification. The FB2130 uses several chain sizes across its roller and pick-up drives, sprockets with different tooth counts, and bearing and seal combinations whose part numbers sit close together in the same group. Reading the exploded view alongside the quantity column is what stops you ordering one tension spring when the assembly needs four, or a left-hand guard when the right-hand one has failed.

The serial threshold matters as well. Because this is the ZRA103TL B edition, it is the correct reference for machines from VGJB000924 onward, and the drawings in it supersede the previous release.

Get the FB2130 Parts Book and Keep the Baler Running

With this Kuhn FB2130 spare parts list on the bench you can identify any component on the machine, confirm the quantity fitted, and quote a complete Kuhn part number to your dealer or supplier without a second trip out to the yard. It supports the work that actually keeps a fixed chamber baler earning: rebuilding the roller drive after a chain failure, re-sealing the tailgate cylinders, replacing wheel bearings and brake shoes on the axle, renewing the pick-up tines and cam track, working through the twine tie or net wrap mechanism when bales start coming out unbound, and tracking down a sensor or harness fault at the control box.

Working from the correct illustrated group instead of a guess also protects the machine – the right bearing carrier, the right seal and the right tension spring keep the assembly running at the loads it was designed for rather than introducing a weak point that fails again mid-season.

Delivery is instant. This 140-page multilingual FB2130 parts catalogue arrives as a PDF the moment payment clears, with no shipping and nothing to wait for in the post. Open it on a phone in the workshop, a tablet in the field or a laptop at the desk, print the groups you are working on, and keep the whole book searchable on any device you own.

IMAGES PREVIEW