Linde Diesel Forklift Truck 391 Series: H14, H16, H18, H20 Operating Manual (User Manual) – PDF Download

Description

Linde Diesel Forklift Truck 391 Series: H14, H16, H18, H20 Operating Manual (User Manual)

FILE DETAILS:

FILE TYPE:PDF
MANUAL LANGUAGE:ENGLISH
PAGES:266
DOWNLOADABLE:YES

DESCRIPTION:

Forklift trucks in the 391 series are designed to handle loading and palletising operations for loads up to 1.4tforH 14, upto 1.6 tfor H 16, upto 1.8tforH 18 and upt02.0tforH 20ata load distance of 500 mm. The H 20 600 forklift truck supports loading and palletising of 2.0 t, given a load distance of 600 mm. Details on the exact lift height specific maximum loads are available in the load capacity diagram.

SCREENSHOT OF THE MANUAL:

TABLE OF CONTENTS:

• Linde Diesel Forklift Truck 391 Series: H14, H16, H18, H20 Operating Manual (User Manual)
• 1 Introduction
  Your forklift truck 2
  Intended use 3
  Impermissibleuse 4
  Description of useand climatic conditions 4
  Symbols used 5
  Technical description 5
  Receivingthe industrialtruck 7
  Legal requirementsfor placingonthe market 8
  2 Safety
  Safety guidelines 10
  Residualrisks 11
  Stability 12
  Inthe case of tip-over 12
  Handling consumables 12
  Competent person 13
  Regulations 13
  Fit attachments 14
  Fork carriage emergency lowering 17
  Emergency exit with attached rearwindow 18
  3 Overview
  Identificationplates 22
  Truck overview 24
  Operating elements 25
  Display unit 26
  Switch panel 33
  4 Operation
  Service plan before initial commissioning 36
  Instructionsfor running-in 36
  Pre-shift checks 37
  Operating Instructions- 391 807 10 01 EN-06/2013 III
  Standard equipment 38
  Entering and exiting the truck 38
  Adjusting the driver’s seat 38
  Adjusting the steering column 42
  Setting the clock 42
  Seat belt 43
  Starting and stopping the internal combustion engine (dual-pedal operation) 45
  Driving (dual-pedal operation) 48
  Starting and stopping the internal combustion engine (single-pedal operation) 51
  Driving (single-pedal operation) 55
  Steering system 58
  Brake system 58
  horn 60
  Joystick with central lever operation 61
  Joystick with single lever operation 66
  Special equipment 72
  Joystick with central lever operation and 3rd auxiliary hydraulics without toggle
  switch 72
  Joystick with single lever operation and toggle switch-controlled 3rd auxiliary hy¬
  draulics 78
  Depressurisation 84
  Adjusting the driver’s seat equipped with air suspension 84
  Adjusting the driver’s seat with rotating device 86
  Driver’s cabin 88
  Lighting 88
  BlueSpot 91
  Windscreen wiper 92
  Window heater 95
  Heating system, air conditioning 95
  Regeneratingthe particle filter 98
  Regeneratingthe changing particle filter 101
  Linde Forklift Data Management (LFM) 104
  Mast positioning 110
  Working underload 112
  Before taking up load 112
  Adjusting the fork arm distance 113
  Picking up a load 114
  Travelling with load 115
  Setting down loads 116
  Towing device 116
  IV Operating Instructions-3918071001EN-06/2013
  Before leavingthe truck 118
  Loading/Transporting 119
  Removingthe lift mast 119
  Driving without the lift mast 119
  Loading the crane 119
  Transportation by lorry or low-bed semi-trailer 120
  5 Maintenance
  General information 122
  Inspectionand maintenance data 123
  Recommendationsfor consumables 124
  Inspectionand maintenance overview 127
  Service plan as required 127
  1000 h service plan 128
  3000 h Service plan 130
  6000 h Service plan 133
  9000 h Service plan 136
  Engine 139
  Checking the engine oil level 139
  Changing the engine oil and engine oil filter 140
  Fuel 143
  Draining water from the fuel filter 145
  Changing the fuel filter 145
  Cleaning the fuel tank ventilation hose 147
  Checking the coolant level 147
  Changing the coolant 148
  Checking the coolant concentration 150
  Cleaning the water cooler and hydraulic oil cooler, and checking them for leaks 152
  Checking the condition and secure positioning of the engine support and engine
  mounting 154
  ChecktheconditionoftheV-ribbedbelt 154
  Changing the V-ribbed belt 155
  Changing the toothed belt and tensioning pulley 156
  Changing the water pump 156
  Checking the toothed belt drive 156
  Changing the air filter cartridge 156
  Changing the air filter safety cartridge 157
  Check the dust discharge valve 159
  Cleaning the prefilter (special equipment) 160
  Cleaning the oil bath air filter (special equipment) 160
  Operating Instructions-391 807 1001EN-06/2013 V
  Change the oil in the oil bath air cleaner (Optional) 161
  Check the intake and exhaust pipes for leaks 162
  Checking the particle filter system 162
  Draining water from the water trap at the changing particle filter (special equip¬
  ment) 163
  Cleaningthe water trap at the changing particle filter (special equipment) 163
  Cleaning the pressure control device at the changing particle filter (special equip¬
  ment) 164
  Gearbox 165
  Drive axle and wheel motors: Checking mounting 165
  Checking and adjusting the side stops on the drive axle 166
  Checking the drive axle bearings for wear 166
  Checking the mounting of the hydraulic pump on the engine 167
  Chassis, bodywork andfittings 168
  Cleaning the truck 168
  Bonnet 168
  Floorplate 170
  Maintainingthe heating system and air conditioning (special equipment) 171
  Checking the condition and correct function ofthe seat belt 172
  Chassis: Checkingthe mounting 174
  Checking and oiling the bearing points and joints 175
  Topping upthe washer system container (special equipment) 176
  Chassisframe 177
  Wheelchange 177
  Tighten the wheel bolts 177
  Checking the tyres for damage and foreign objects 178
  Checking the tyre pressure 178
  Checking the condition ofthe antistatic belt 180
  Cleaning and lubricating the steering axle, checking the mounting 180
  Controls 181
  Checking the parking brake for correct operation 181
  Checking the pedal group 181
  Checking the bellows at the actuating lever 182
  Electrics 183
  Check the condition and secure positioning of electric cables, cable connectors and
  connections 183
  Battery: condition check, disposal 183
  Hydraulics 185
  Checking the oil level in the hydraulic system 185
  Changingthe hydraulic oil 186
  Hydraulic system: changing the filter 188
  VI Operating Instructions-3918071001EN-06/2013
  Checking the bleeder valve onthe hydraulic tank for correct function 191
  Check the hydraulic system for leaks 192
  Checking the tilt cylinder bearings for wear 193
  Checkthemountingofthetiltcylinders 193
  Checking the hose carriage 193
  Checking the pre-load of the double hoses 195
  Load lift system 196
  Working on the lift mast and at the front of the truck 196
  Cleaning and spraying the lift mast chain 199
  Checking the mounting, condition and function of the lift mast, lift mast chains, lift
  cylinders and end stops 200
  Adjusting the lift mast chain 200
  Checking the fork arms and fork arm safety devices 202
  Cleaning and lubricating the sideshift (special equipment), checking the fastening ….203
  Checking the sideshift (special equipment) for wear 204
  Cleaning and lubricating the fork prong positioner (special equipment), checking the
  mounting 204
  Checking the fork prong positioner (special equipment) for wear 205
  Self-help 206
  Open cover of electrical system 206
  Fusesfor basic and special equipment 207
  Mainfuses in the engine compartment 208
  Diagnostics connector 209
  Malfunctions during operation 210
  Malfunctions, causes and remedies: Diesel engine 212
  Malfunctions, causes and remedies— hydraulic system 215
  Jump start 217
  Towing 218
  Shutting down 222
  Shutting down the truck 222
  Disposal of old trucks 223
  Operating Instructions- 391 807 10 01 EN-06/2013 VII
  6 Technical data
  Overview of dimensions 226
  TypesheetH14D 227
  Type sheet H16D 230
  Type sheet H18D 233
  Type sheet H20D 236
  Type sheet H20D-CT/600 239
  Lift mast data model 181 242
  Truck configuration 243
  Tyre variants and rim sizes 244
  Load capacity diagrams 245
  Additional capacity rating platefor attachments 246
  Noiseemission values 247
  Vibration characteristic values for bodily vibrations 248
  VIII Operating Instructions-3918071001EN-06/2013

LINDE DIESEL FORKLIFT TRUCK 391 SERIES: H14, H16, H18, H20 OPERATING MANUAL (USER MANUAL) – PDF DOWNLOAD:

PLEASE NOTE:
⦁ This is the SAME exact manual used by your dealers to fix your vehicle.
⦁ The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
⦁ Any queries / doubts regarding your purchase, please feel free to contact [email protected]