Linde E12 E14 E15 E16 E18 E20 Electric Forklift Operating Instructions Manual – Series 386

Description

Linde E12 E14 E15 E16 E18 E20 Electric Forklift Operating Instructions Manual

This is the complete operating instructions manual for the Linde Series 386 electric forklift truck range, covering models E 12, E 14, E 15, E 16 (including the C, P, H, PH and L variants), E 18 (including L and PH variants) and E 20 (including PH, PL and PHL variants). Published under document number 386 807 1001 EN with a 01/2007 edition date, it is the full operator reference supplied with these trucks, giving drivers, fleet supervisors and workshop staff the procedures, checks and safety information needed to run and maintain the equipment correctly.

File Details

• Manual type: Operating Instructions Manual
• Brand: Linde
• Model range: E 12, E 14, E 15, E 16, E 16 C, E 16 P, E 16 H, E 16 PH, E 16 L, E 18, E 18 L, E 18 PH, E 20 PH, E 20 PL, E 20 PHL
• Series: 386
• Document number: 386 807 1001 EN
• Edition/date: 01/2007
• Language: English
• Page count: 286 pages
• File format: PDF

Chapters Covered

• Introduction — intended use, symbols used, technical description, takeover of the forklift truck, initial commissioning
• Safety — safety regulations, what to do in the case of a tip-over, handling fluids and lubricants, experts, operation of industrial trucks in the plant area, determination and assessment of hazards
• Overview — type plates, vehicle overview, controls, indicator unit layout
• Operation — running-in instructions, checks before starting work, adjusting the driver’s seat, steering column, time, seat belt, switching the vehicle on, two-pedal and single-pedal driving, steering, brake system, warning horn, lifting system and attachments (central lever and single lever operation)
• Special Equipment — swivel seat, air-sprung seat, lift mast positioning, lift height limitation and indicator, lighting, windscreen wipers, heating, seat heater, Linde Forklift Data Management (LFM), built-in battery charger (Linde Power Source)
• Working Under Load — load diagrams, adjusting fork arm distance, taking up and setting down loads, driving under load, towing device, loading and transporting, leaving the truck
• Maintenance — inspection and maintenance overview programme, service overview, inspection and maintenance data, recommendations for working materials, working on the lift mast, checks before starting work, first 50-hour service, maintenance every 500–1000, 3000 and 6000 hours
• Breakdown Search — fuses for basic and special equipment, diagnostic connector, fork carriage emergency lowering, emergency exit, towing regulations, shutdown and disposal, malfunction troubleshooting
• Technical Data — type plate data for every model, load diagrams, lift mast data, vibration and noise values
• Circuit Diagrams — wiring diagrams for basic and special equipment, hydraulic circuit diagrams

Altogether, this Linde electric forklift operating instructions manual gives a workshop or fleet operator everything needed to run the Series 386 trucks correctly. It explains the digital control system (LDC), the two steering axle designs (turntable steering axle on E 12 to E 18, combi-steering axle on E 16 to E 20), the front-wheel drive layout with two electric drive motors on a compact axle, the hydraulic system for steering, lift and tilt, and the brake system that combines hydraulic service braking, regenerative electric braking through the LBC system, and a hydraulic parking brake. The indicator unit section decodes the full set of warning lights, error codes and service-interval displays.

Model-by-Model Coverage

Each model has its own dedicated type plate data sheet inside the Technical Data chapter — E 12 (1200 kg capacity), E 14 (1400 kg), E 15 (1500 kg), E 16 (1600 kg across base, C, P, H, PH and L variants), E 18 (1800 kg across base, L and PH variants) and E 20 (2000 kg across PH, PL and PHL variants). Every sheet lists identification data, weights, tyre and wheel data, lift mast tilt angles, dimensional data (total length, width, height, turning radius, working widths for standard pallets), performance data (travel speed, lift and lower speeds, pulling force, climbing capability, acceleration), drive and motor details, battery voltage and rated capacity, and working pressure for attachments.

Maintenance Intervals Documented

The maintenance chapter walks the technician through the exact service scope letters A through E, with the intervals marked out at 50, 1000, 500 to 1000, 3000 and 6000 operating hours (or yearly, biennial and quadrennial equivalents). It covers drive axle side-stop adjustment, gear oil changes, wheel gear leak checks, parking brake operation and adjustment, potentiometer adjustment on the drive control pedals, pedal greasing, combi-steer axle greasing, main contactor inspection, fan cleaning and function checks, control-unit function checks, sideshift cleaning and greasing, lift mast chain adjustment, lift mast fastening torque (110 Nm), tilt cylinder bearing inspection, breather and filter changes, hydraulic oil changes, side shift slide-guide wear limits, wheel gear oil changes with or without drive wheels fitted, double hose pretension measurement, and the full battery charging procedure.

Why This Manual Matters

Every check, adjustment and service task on the Linde E 12 through E 20 is documented here in the order the manufacturer intended. You get the correct lubricants, the correct torque values, the correct lift mast chain adjustments, and the correct battery charging procedure with the built-in Linde Power Source charger. The seat belt, seat switch, emergency stop and parking brake checks are laid out in a fixed before-shift sequence, and the manual explains what each indicator light means when it comes on.

Who This Is For

Forklift operators, fleet supervisors, maintenance technicians and warehouse managers responsible for Linde Series 386 electric trucks. It is equally useful for anyone commissioning a used E 12, E 14, E 15, E 16, E 18 or E 20 who needs the original documentation to run the truck safely and keep it in spec.

Get It Now

IMAGES PREVIEW

This Linde E12 E14 E15 E16 E18 E20 operating instructions manual is delivered as an instant PDF download — no shipping, no waiting. Read it on a laptop, tablet or phone, print the pages you need for the workshop floor, and keep the file as a permanent reference for the life of the truck. Whether you need to look up a specific maintenance interval, decode a warning light, or hand a new operator the correct safety briefing, the answer is a few searches away.