Linde H12T H16T H18T H20T-03 LPG Forklift Operating Instructions Manual 3508043351

Description

Linde H12T H16T H18T H20T-03 LPG Forklift Operating Instructions Manual 3508043351

This Linde H12T H16T H18T H20T-03 LPG Forklift Operating Instructions Manual 3508043351 is the complete operating guide for the Linde 350 series LPG-powered counterbalance forklift trucks. It covers the H 12 T – 03, H 16 T – 03, H 18 T – 03 and H 20 T – 03 models in detail, giving operators, fleet managers and workshop technicians the information needed to run, inspect, service and troubleshoot these trucks correctly. The manual is written in English and carries the document number 350 804 3351 GB 0705. Whether you are carrying out daily pre-shift checks, adjusting the LPG system, interpreting warning lights, or looking up torque figures and maintenance intervals, this Linde H12T H16T H18T H20T-03 operating instructions manual provides the procedures and data directly from the manufacturer.

File Details

• Manual type: Operating Instructions
• Brand: Linde
• Models covered: H 12 T – 03, H 16 T – 03, H 18 T – 03, H 20 T – 03
• Engine: LPG engine
• Language: English
• Page count: 114
• File format: PDF
• Document number: 350 804 3351 GB 0705

Chapters Covered

• Your Linde lift trucks
• Approved applications
• Technical note
• Truck takeover
• Type plates
• Technical data
• Lifting capacity diagrams
• Noise emission levels
• Frequency characteristic for human body vibrations
• Description
• Engine
• Hydraulic system
• Operation
• LHC control
• Brakes
• Steering
• Electrical system
• Safety rules
• Accident prevention check
• Operation of industrial trucks in the plant area
• Running-in instructions
• Experts
• Safety instructions for the LPG system
• Checks and services before initial operation
• Daily checks
• Opening and closing the bonnet
• Check the engine oil level
• Checking the LP gas level
• Check the coolant level in recovery tank
• Visual, olfactory inspection of LPG system
• Changing the LPG cylinder
• Filling the LPG tank
• Check the tyre inflation pressure
• Adjusting the operator seat
• Applying the seat belt
• Starting the engine
• Stopping the engine
• Malfunctions during operation
• Driving
• Forward travel
• Reverse travel
• Changing the travel direction
• Steering
• Service brake
• Stop pedal
• Parking brake
• Lifting device and attachments
• Operating the attachments
• Installation of additional equipment
• Turning on the heater
• Operating the horn
• Truck data acquisition
• Fuses
• Before lifting a load
• Adjusting the fork spread
• Loading
• Unloading
• Parking the truck
• Transport with lorry or low-bed semi-trailer
• Hoisting the truck with a crane
• Wheel change
• Trailer coupling
• Mast removal
• Towing
• Emergency exit for trucks with rear windscreen
• Taking the truck out of operation
• Putting the truck back into operation
• Disposal of old vehicles
• Maintenance
• Work on the mast and on the front part of the truck
• Lift mast types
• Inspection and maintenance after the first 50 service hours
• Inspection and maintenance schedule
• Inspection and maintenance as required
• 500-hour inspection and maintenance
• 1000-hour inspection and maintenance
• 2000-hour inspection and maintenance
• 3000-hour inspection and maintenance
• Inspection and maintenance data
• Fuel and oil recommendations
• Troubleshooting guide (LPG engine)
• Troubleshooting guide (hydraulic system)
• Electric circuit diagram (standard equipment)
• Electric circuit diagram (options)
• Electric circuit diagram (Truck Data Management)
• Hydraulic schematic
• Index
• Safety rules for LP gas (excerpt)
• Safety precautions for transistorised ignition systems

The Linde H12T H16T H18T H20T-03 LPG Forklift Operating Instructions Manual 3508043351 is far more than a basic owner’s booklet. It is a complete operational and service reference for the 350 series LPG trucks, combining day-to-day operating guidance with scheduled maintenance procedures, technical specifications and system-level troubleshooting. The early chapters explain the truck layout, hydrostatic drive, LPG engine, hydraulic system, steering and braking, so the operator understands how the machine is meant to behave. The safety and LPG handling sections are especially important for anyone working with liquefied petroleum gas forklifts, covering leak checks, cylinder changes, filling procedures, ventilation requirements and emergency actions. The maintenance chapters break the service schedule down by interval, from daily checks and first 50-hour service through 500, 1000, 2000 and 3000-hour maintenance, making it straightforward to plan workshop time and keep the truck within the manufacturer’s requirements. Later sections provide wiring diagrams, hydraulic schematics and troubleshooting charts for both the LPG engine and the hydraulic system, giving technicians a structured path from symptom to possible cause and remedy.

Key Systems and Controls

The manual explains the Linde double-pedal travel control, hydrostatic drive, LHC electronic control, working hydraulic lever and optional attachment controls. It shows the composite instrument panel and what each warning light means, including engine temperature, hydraulic oil temperature, engine oil pressure, battery charge, fan, LHC system fault and air filter restriction indicators. The operator seat, seat belt, parking brake, stop pedal and steering are all covered with adjustment and usage instructions. For LPG-specific operation, the manual describes how to check the gas level, change the LPG cylinder, fill the LPG tank, inspect the system for leaks and safely shut down the truck. The truck data acquisition keypad and PIN entry system are also documented where fitted.

Maintenance and Service Schedule

Linde H12T, H16T, H18T and H20T-03 trucks rely on regular lubrication, filter changes and system checks. This operating instructions manual lays out the inspection and maintenance schedule in detail. It covers cleaning the lift truck, servicing the air filter and prefilter, tightening wheel fasteners to the specified torque, checking tyres, cleaning the radiator and hydraulic oil cooler, greasing the steer axle, mast and tilt cylinder bearings, checking the ignition timing, renewing engine oil and filter, checking coolant strength, adjusting drivebelts and toothed belts, renewing spark plugs, checking the LPG system with leakage spray, changing the LPG filter, checking the parking brake and much more. Torque values such as 210 Nm for wheel fasteners, 30 Nm for the engine oil drain plug, 20 Nm for spark plugs and 800 Nm for mast fastening bolts are given where applicable, along with capacities for engine oil, hydraulic oil and coolant.

Troubleshooting and Diagnostics

When the truck does not start, runs irregularly, overheats, loses hydraulic power or shows abnormal noise, the troubleshooting guides point to likely causes and remedies. The LPG engine section covers fuel supply, ignition, spark plugs, distributor, mixer and evaporator issues. The hydraulic system section covers low pressure, oil flow problems, overheating and pressure fluctuations. Because the manual includes electric circuit diagrams for standard equipment, options and Truck Data Management, plus a hydraulic schematic, technicians can trace wiring and hydraulic circuits with confidence. This is the kind of information that saves time, prevents guesswork and helps avoid expensive damage from incorrect adjustments.

Safety and LPG Handling

LPG forklifts require specific safety awareness. This Linde manual includes safety rules for LP gas, accident prevention checks, running-in instructions and precautions for transistorised ignition systems. It explains that LPG is heavier than air, can form explosive mixtures in pits or low areas, and must be handled with care during cylinder changes and refuelling. The manual also stresses daily visual and olfactory inspection of the LPG system, the correct way to open and close shutoff valves, and what to do if a leak is suspected. For any workplace using Linde H12T, H16T, H18T or H20T-03 trucks, having these operating instructions available is essential for safe and compliant operation.

Why This Manual Matters

Correct operation and maintenance are what keep a Linde LPG forklift productive, safe and economical. The Linde H12T H16T H18T H20T-03 LPG Forklift Operating Instructions Manual 3508043351 gives you the manufacturer’s procedures for starting, driving, lifting, parking, servicing and troubleshooting. It helps operators avoid misuse, helps technicians follow the right intervals and torque values, and helps fleet managers keep records and plan maintenance. Whether you are new to the truck or have years of experience, this manual provides the reference material needed to get the job done properly.

IMAGES PREVIEW

Instant PDF Delivery

This Linde H12T H16T H18T H20T-03 operating instructions manual is delivered as an instant PDF download after payment. There is no shipping and no waiting for a physical book. You can view it on a computer, tablet or smartphone, print only the pages you need for the workshop, and keep a permanent copy for your records. If you own, operate, service or manage Linde H12T, H16T, H18T or H20T-03 LPG forklift trucks, this PDF manual is a practical, searchable-ready reference you can rely on every day.