Linde H20 H25 Forklift Spare Parts Catalog 392-02 – Complete PDF Parts Manual

Description

Linde H20/25 Spare Parts Catalog – Document 392-02

This is the complete Linde H20/25 forklift spare parts catalog, printed by Linde under document number 392-02 and dated 28.04.2017. At 1,199 pages it is the full multi-section parts breakdown for the H20 and H25 counterbalance trucks of the 392 series, covering every subsystem from the base engine through the lift mast and specialised attachments. Each listing entry carries the illustration figure number, part number, quantity, description, replacement information, validity and the specific truck variants (engine code) the part applies to – exactly as Linde issued it.

File Details

• Manual type: Spare parts catalog / illustrated parts list
• Brand: Linde
• Model: H20 / H25 (392 series)
• Document number: 392-02
• Linde reference: 392 801 01 00
• Date: 28.04.2017
• Page count: 1,199 pages
• File format: PDF
• Languages: German, English, French, Italian, Spanish

Chapters Covered

• Engine
• Power Unit: Engine/Motor
• Drive: Transmission
• Chassis Unit
• Steering and Wheels
• Controls
• Electric Equipment
• Hydraulic Unit
• Lift Mast
• Special Equipment
• Miscellaneous

Engine – Complete Internal Breakdown

The engine section alone spans dozens of exploded drawings covering the cylinder block with pistons, crankshaft, connecting rod bearings, piston rings, cylinder head with valves and camshaft, toothed belt and tensioning roller repair kits, coolant pump, oil pump, oil filter bracket, injection pump, injection nozzle pressure pipes, exhaust manifolds, alternator assemblies, starter motor and the vacuum pump. Every fastening item – hexagon bolts, socket-head screws, threaded pins, O-rings, gaskets and snap rings – is listed with its own part number, quantity and the engine-code validity that tells you whether it fits the BXT, BEQ, BEU, BJC, BEF, CBSA, CBHA, CBJB or CPY variants.

Power Unit and Drive: Transmission

The variable displacement pump section (HPV55-02R E2 435 E) is broken down in full: service unit, clutch release sleeve, valve block, pipe lines, remote control E2, magnets, housing, drive shaft, cradle, piston assemblies and every seal and shim. The same treatment is given to the controllable pump MPR50, the hydraulic axle AH25-03 and the fixed displacement motor HMF360R, including brake valve internals. Bearing numbers, tolerances and shim sizes are all present so the shop can rebuild rather than replace.

Chassis, Cab and Body

Chassis and counterweight, frame with protective device, hood and coverings, front and side coating, rear panelling, drainage hole covers, front console, damping mats, driver’s seat (standard, comfort, air-suspended and Super Comfort Active), rotating seat mechanism, windscreen, roof pane, rear window, washer system, mirrors, doors – including the split door, sliding window, plastic doors and safety door variants – are all listed with the fasteners, rubber profiles and latches that go with them. Heater and air-conditioning consoles are covered in two editions (before and after 11/2013), together with the air-conditioning supply lines.

Controls, Electrical Equipment and LPG System

Pedal operation, parking brake, actuator of the pilot valve, armrest harness, tilt angle sensor and panelling sit alongside a large electrical chapter: main harnesses for diesel and LPG in three parts each, lighting and blinker systems, LED lighting harnesses, working lamp harnesses, rear light harnesses, camera system, data terminal, radar sensor, height indicator variants, LPG monitoring, central electrical box, battery and accessories, and the Linde Forklift Data Management (LFM) components. The LPG side is fully documented – LPG tank, filling valves, hoses, pressure regulator repair kit, evaporator, gas system repair kit, volumetric filling tanks (45 L, 55 L and French specification) and installation hoses.

Hydraulic Unit and Lift Mast

Control valve and lines, control block VW12-M3 and VW12-M4, oil tank with lines and accessories, oil filter and lines for the hydraulic travel system, tilt cylinder, accumulator, pressureless connection and auxiliary hydraulic services are all broken down. The lift mast chapter then covers fork carriage and fork arms, standard / duplex / triplex mast assemblies in every lift height from HH 3150 up to HH 6550, lift cylinders (middle and external), integrated sideshift, fork adjusting devices and hose pulleys – each matched to the exact mast height it belongs to.

Why This Catalog Belongs in Your Workshop

Ordering the wrong part on an H20 or H25 is an expensive mistake. Linde changed engine codes, mast heights, valve block revisions and cab fittings several times over the life of the 392 series, and the same visual component can carry a different part number depending on whether the truck is BXT, BEQ, BEU, BJC, BEF, CBSA or one of the CNG/LPG variants. This catalog solves that problem at the source: every line item is tied to an engine-code validity field and a truck-variant field, so you can check the part number against the machine in front of you before you place an order – not after.

It is equally valuable for rebuilds and refurbishment. The exploded drawings show how the assembly goes together, which shim goes where, which seal ring goes under which plug, and which bolt is single-use only. Hydraulic pump internals, brake valve seats, tilt cylinder seals, mast chain lengths, mast pipe runs and fork carriage roller sizes are all present with the tolerances and part numbers you need to restore a machine to proper working order rather than guesswork.

Field service technicians also use it as a fast cross-reference. Fault-tracing a lighting harness, replacing a solenoid coil on the control block, identifying the right wiper motor for a heated rear window, or confirming which mirror arm fits a bullet-proof glass cab – it is all here, in one document, indexed to part numbers, so you are not searching three separate sources.

IMAGES PREVIEW

Instant PDF Delivery, Any Device, Ready to Print

The Linde H20/25 spare parts catalog 392-02 is delivered as a single downloadable PDF the moment payment is confirmed. No shipping, no waiting for a disc, no licence server to call. Open it on a laptop in the office, a tablet on the workshop floor or a phone at the machine – the layout reflows cleanly and every illustration stays legible. Print the pages you need for the job in hand and keep the file on file for the next truck that comes through the door. With 1,199 pages of part numbers, exploded views and engine-code validity, this is the complete parts reference for the Linde H20 and H25 392-series forklift – available now for instant download.