Linde H35 H40 H45-04 Forklift Spare Parts Catalogue – 3528069411 PDF Download

Description

Linde H35 H40 H45-04 Spare Parts Catalogue – Document 352 806 94 11

This is the complete spare parts catalogue for the Linde Fork Lift Truck H35/H40/H45 – 04 with combustion engine, covering trucks built from series 06/01 onward. Published under document number 352 806 94 11 (reference 352.803.00.00 / 02.03, dated 25.02.2003), the catalogue is the working reference for identifying, verifying and ordering genuine components across the entire H35, H40 and H45-04 range. Every page pairs exploded assembly illustrations with positional callouts, LINDE part numbers, designations and required quantities, so a part can be matched to the exact truck on the workshop floor without guesswork.

File Details

• Manual type: Spare Parts Catalogue
• Brand: Linde
• Model family: H35 / H40 / H45 – 04
• Application: Fork Lift Truck with Combustion Engine from series 06/01
• Document number: 352 806 94 11
• Reference / edition: 352.803.00.00 / 02.03
• Date: 25.02.2003
• Language: English
• Format: PDF
• Page count: 649 pages

Chapters Covered

The catalogue is organised into ten registers, each broken down into sub-grouped parts lists with dedicated exploded views:

• Register 01 – Power Unit: Engine – air supply and air filter, engine suspension and pump drive, cooling system, diesel fuel system, LPG system (non-regulated and governed catalyzer), LP gas pressure regulator and mixer repair kits, LPG tank versions (standard, Japan, Great Britain, Australia, volumetric filling), exhaust systems (diesel and LPG), dust guards, particle filter installation and regeneration, cooling air guide filter
• Register 02 – Drive: Transmission – power unit and housing (HPV135-02), port plate housing, valve and gear pump (HPV135-02), hydraulic remote control H2TF, service unit AH45-02, axle driven gear GR6H-01, center pieces AH45-02 I and II
• Register 03 – Chassis, Bodywork and Fittings – chassis, overhead guard and counterweight, hood and coverings, damping mats, driver’s seat (including container version), driver’s cab, parted doors, heater
• Register 04 – Steering and Wheels – hydrostatic steering with lines, hydrostatic steering unit, steering axle, wheels and tyres
• Register 05 – Controls – speed regulation (diesel and LP gas versions), travel and brake operation, actuator of pilot valve, single pedal version
• Register 06 – Electric Equipment – electric armatures and battery, main harness (diesel and LPG), set cable, various cable looms, cable trees for lighting and lighting version Japan, spot light, truck lighting and warning blinker system, harnesses for particle filter, cable trees for catalyzer governed, flash light and warning lights
• Register 07 – Hydraulic Equipment – control valve and lines, oil tank with lines and accessories, oil filter and lines for hydraulic travel system, microfine hydraulic oil filter, pilot valve, hydraulic remote control unit for scoop, control cylinder for hydraulic speed control, tilt cylinder, accumulator for lift mast, accumulator guard overhead
• Register 08 – Mast Assembly and Auxiliary Hydraulics – standard mast type 166 with fork carriage and fork arms, duplex mast type 167, triplex mast type 168, lift cylinder, auxiliary hydraulics for standard mast 166, duplex mast 167 and triplex mast 168
• Register 09 – Options and Accessories – highway equipment, load backrest, raised driver’s seat version
• Register 10 – Miscellaneous – plates, operating material

Engine Coverage – AP80975 and AF81017

The engine section of the catalogue is split across two dedicated engine blocks. For AP80975 the parts are indexed from cylinder block, crankshaft, pistons and connecting rods, cylinder head, rocker shaft, timing gear and camshaft, lubricating oil pump and delivery housing, fuel injection equipment (diesel), flywheel housing, flywheel and starter ring, starter motor, lubricating oil sump, oil filler and breather, oil filter and integral cooler, water pump, thermostat and heat exchanger, water outlet and inlet, fan and extension, alternator and generator, gear drive auxiliary drive options, induction manifold, air cleaner and restriction indicator, exhaust manifold, low pressure fuel system, cold start system, engine lifting, mountings, heater/starter switch, lubrication oil pressure switch and gauge, temperature gauge and sender, radiator and cowling, fuel pre-lift pump, application miscellaneous and auxiliaries, and top/bottom service kits. A parallel set of sections is catalogued for AF81017, including ignition system, exhaust outlet flange and equivalent service kits, so a technician working on either engine variant can find the correct part reference from the same document.

What This Spare Parts Catalogue Gives a Technician

Every register opens with an illustration table that shows the assembly as a numbered exploded view. The following pages list, in the same numeric order, the position number, the LINDE part number, the component designation and the quantity required. Where sub-assemblies are not available individually for production reasons, the catalogue flags this so you know to order the complete unit. Availability notes are indexed at the front of the book – parts on short delivery, packaged quantities with minimum order amounts, restricted availability items that must be procured after order, parts being phased out and superseded references, and items not sold separately – so a parts desk can set accurate lead-time expectations before the customer commits.

Because the same part can appear in more than one register, the alphabetical key to part numbers at the front of the catalogue is a genuine time saver: each part number is cross-referenced to the page and register where it is listed. If you have a LINDE part number from a previous order, a damaged component or a dealer invoice, you can jump straight to the correct illustration instead of scrolling the whole book. This is exactly how the catalogue is used at a busy Linde parts counter.

Systems and Assemblies You Can Identify

Hydraulic coverage spans the control valve (EZH 3-way and DZH 4-way), auxiliary valve, shuttle valve, oil tank assembly with suction filter and air filter, return line filter, microfine hydraulic oil filter with temperature and pressure switch, pilot valve CHS-02/02 and hydraulic remote control unit CHS-02/03 for scoop operation, control cylinder, tilt cylinder, and lift mast accumulators including the accumulator guard overhead. Mast coverage addresses standard mast 166, duplex mast 167 and triplex mast 168 with the fork carriage, fork arm, leaf chains, chain anchors, roller supports, guide assemblies and lift cylinders matched to each lift height variant and truck weight class. Powertrain coverage includes the HPV135-02 power unit and housing, port plate housing with relief valves and gear pump, H2TF hydraulic remote control, AH45-02 service units and center pieces, and the GR6H-01 axle driven gear with planet carriers and annular gears.

Chassis and bodywork items include the chassis and overhead guard assembly, counterweight assemblies specific to each model (H30DG, H35D, H35T, H35DG, H40D, H40T, H45D, H45T, H45D-600, H45T-600, eyelet-screw versions and air drier versions), hood and coverings, damping mats, driver’s seat standard and container versions, driver’s cab with roof, windscreen and door assemblies, parted doors and heater assembly. Steering and wheel coverage lists the hydrostatic steering control valve, steering column, wheels and tyres for pneumatic, solid and twin-tyre fitments. Electrical coverage includes battery and battery support, main harness for diesel and LPG, cable trees for lighting and lighting version Japan, warning blinker system, harnesses for particle filter, cable trees for governed catalyzer and flashing beacon circuits.

Who This Manual Is For

Forklift service technicians, fleet maintenance departments, independent workshops, parts managers and Linde dealers supporting H35, H40 and H45-04 trucks will use this catalogue daily. It is the same document a Linde parts desk works from, so part numbers, quantity counts and supersession notes line up directly with what the dealer will quote. Anyone restoring or keeping a combustion-engine Linde 39/40/45-class truck in service will find the illustrated assemblies invaluable for confirming that the component in hand is the right one before it is ordered.

IMAGES PREVIEW

Instant PDF Delivery

The Linde H35 H40 H45-04 Spare Parts Catalogue is delivered as a downloadable PDF immediately after payment – there is no physical shipment, no customs delay and no waiting for a disc. The file opens on any computer, tablet or phone with a PDF reader, so it can be used at the bench, in the cab or on the shop floor. Pages can be printed for a job file, marked up with a stylus, or attached to a purchase order so the parts department sees the exact illustration and position number. Because the catalogue is a searchable-quality scan of the original Linde parts book, all LINDE part numbers, designations and quantities appear exactly as printed – nothing has been re-typed or re-numbered. Keep the file on your workshop system and the reference is available for every H35, H40 or H45-04 truck that passes through for years to come.