New Holland LB115.B EUR Backhoe Loader Parts Catalog January 2005-On PDF

Description

This is the full parts catalog for the New Holland LB115.B EUR Backhoe Loader, issued for machines built from January 2005 onward. It is the counter reference a dealer, workshop, or owner uses to pin down exactly which component, seal, hose, fastener, gasket, or complete assembly belongs on a specific LB115.B — and to do it by section reference and part number instead of by guesswork.

File Details

• Manual type: Parts Catalog
• Brand: New Holland
• Model: LB115.B EUR Backhoe Loader
• Coverage date: January 2005 onward (1/05-)
• Language: English
• Page count: 1167 pages
• File format: PDF

Chapters & Sections Covered

• Engine group — cylinder block, covers, breather, cylinder head, valve mechanism, intake and exhaust manifolds, crankshaft, pistons and connecting rods, flywheel, crankshaft pulley, dynamic balancer, gears and shafts, camshaft, fuel injection pump and system, fuel filter, fuel pump, turbocharger, engine oil system, oil pump, oil filters, oil filter and cooler, water pump, cooling system, thermostat, fan drive, power take-off, starter motor, alternator, engine lift hook
• SEC. 02(00) — Fuel tank, muffler, radiator, air cleaner, chassis
• Fuel tank and related parts, muffler and extensions, expansion tank, air cleaner and hoses
• Rear support (side shift), frame (center pivot), frame (side shift)
• SEC. 05(00) — Rear axle
• Gearing speed gear, transmission housings, transmission gear train sections, transmission covers and control valve
• Gear filter pipes, front and rear driveshaft, transmission oil cooling pipes
• SEC. 06(00) — Electrical
• SEC. 07(00) — Slides valves
• SEC. 08(00) — Body & hood
• SEC. 10(00) — Body, hood & driver’s post
• Power steering hydraulic system (standard and 4WS), power steering motor hoses, steering motor, wheel and column
• Chassis harness and ground wire — power shuttle and power shift, battery lock-out switch, engine harness
• Swing post assembly, bushings and pins, swing post pins and transport lock hook
• Hydraulic oil reservoir, hydraulic pump groups, hydraulic system piping across all numbered sub-sections
• Hood, grille and related parts, cab screen, cab fasteners
• Transport lock — rear locking, transport lock on/off switch, valve and hoses, transport lock hook, cylinder and hose
• Arms and joints, lift cylinder, loader bucket control cylinder, lift cylinder and bucket pipes, stabilizer cylinders (center pivot and side shift), pipes for stabilizer cylinders, return to dig sensor, cylinders and rotation plate, swing cylinders
• Front control valve support and transmissions — center pivot and side shift
• Cab electrical — ceiling light, back-up alarm, ignition switch, power point, fuse panel and side console harness, front dash, windscreen wipers and reservoir, radio antenna and speaker cover, lamps and lights, cab safety frame and extinguisher
• Cab frame and door, windows, rear windows, fenders, door components, cab soft trim, rear mirror and sun screen, cab panel dash
• Cab/canopy, heater housing, coil, blower and valve, heater assembly and filters, heater water hoses, air ducts and vents, heater control panel
• Cab safety frame and brake pedal, hand brake, hand-operated and pedal-operated accelerator control
• Forward/reverse and multi-purpose lever, stabilizer control, pilot control diagnostics, cab miscellaneous caps
• Information symbol decals, warning symbol decals, cab warning and information decals, backhoe/loader/engine warning decals, forward/reverse and steering decals, model identification
• Approval packs for Italy, Germany, Europe, UK-Europe and France-Europe
• Silent hammer CB65S, hammer CB65B, air intake cap and pre-cleaner, centrifugal pre-cleaner
• Front and rear lifting hooks, front weights, rear weight (center pivot), 4WS front spare wheel
• Backhoe control valve — 6 sections (center pivot and side shift), 7-section excavator control valve, 8-section excavator control valve, 2-section and 3-section control valve for loader
• Lock valve on tilting cylinder, lock valve on lifting cylinder, stabilizer cylinder lock valve, lock valve for bucket 4×1 / 6×1, locking valve on backhoe lift and dipperstick cylinder
• Front axle (4WS) — box, steering axles, bevel gear pair, differential locking, self-locking front axle, axle-shaft articulated, hubs
• Rear axle — RH and center housing, LH housing and bushings, RH swivel housing, steering cylinder and sensor, LH swivel housing, ring gear and pinion assembly, pinion shims, differential (standard and self-locking), brakes, wheel carrier and hub, planetary gears and cover
• System hammer components (cab), glide ride valve and hydraulic system for machine frame levelling, on/off switch
• Buckets — 6×1 with blade, 6×1 with tine, 4×1 with blade, 4×1 with tine, bucket fork kits, hydraulic bucket cylinder
• Backhoe buckets — 12-inch, 18-inch, 24-inch, 30-inch and 36-inch with pin teeth or bolt-on teeth, tooth kits, cutting edges
• Stabilizer feet — street pad and ground foot, center pivot and side shift, reversible stabilizer foot
• Ditch cleaning bucket, front bucket teeth, internal fan, engine accessories, radiator groups, EGS control, A/C housing, blower and coils, compressor, dryer filter hoses, A/C and heater console ducts
• 2-lever, JCB 2-lever, 4-lever and ISO 2-lever backhoe controls with tie-rod assemblies
• Transport lock Europe, hand hammer switch, 4×1 and 6×1 bucket hydraulic lines, pedal-operated telescopic dipper hydraulic systems, seat belts, seat assemblies, front fenders, boom and dipper, telescopic dipper, hydraulic lifting cylinders, plate support, tool kit, cold start

The New Holland LB115.B EUR Backhoe Loader parts catalog is organised the way the machine is: engine first, then driveline, axles, hydraulics, electrical, cab and operator station, then every attachment and approval variant the LB115.B shipped with. Each illustrated group carries a reference table with item number, part number, quantity and description, and exploded views are printed alongside so the position of every individual part is visually confirmed before a number is ordered. Serial-number break points are called out throughout — up to S/N and from S/N columns run through the transmission, hydraulic piping, axles, stabilizers and engine sections so the correct version of a part is picked for the machine in front of you.

What This Parts Catalog Lets You Do

Working on a backhoe loader is only as fast as the parts lookup behind it. With this catalog on hand you can identify a failed seal by its group and item number instead of pulling the assembly apart to measure it, cross a serial-number split to confirm which version of a stabilizer cylinder or hydraulic pipe your LB115.B carries, quote a hose or fitting with the correct connector type already specified, and order a complete assembly — lift cylinder, steering cylinder, swing cylinder, bucket cylinder — with every sub-component listed beneath it. Torque-relevant fasteners, washers, seals and O-rings are individually itemised, so a rebuild does not stall on a missing ring. The approval and decal sections let you confirm the exact warning and information markings for the Italian, German, UK or French market build.

IMAGES PREVIEW

Why the Right Number Matters on a Machine This Size

A wrong seal in a hydraulic cylinder, a mismatched hose end, or a bearing from the wrong axle revision can turn a one-hour job into a return visit. The LB115.B was built in several configurations — center pivot and side shift, 2WD and 4WS, power shuttle and power shift, mechanical and pilot control — and parts changed across serial-number break points inside each. This catalog records those differences as printed by the manufacturer, so the number you order is the number that fits. That is the whole point of keeping a proper parts reference next to the machine.

Instant PDF Delivery

The catalog arrives as a PDF the moment payment clears — no shipping, no waiting on a disc, no missing pages. Open it on a laptop in the workshop, a tablet beside the machine, or a phone at the parts counter, and print whichever exploded diagram or reference table you need for the job in front of you. Keep it on file and the whole LB115.B parts breakdown is one search away for as long as you own the machine.