Perkins 1104C-44TA Parts Manual RJ51163 – Illustrated Engine Parts Catalog

Description

The Perkins 1104C-44TA Parts Manual RJ51163 is the illustrated parts catalog for the Perkins 1104C-44TA engine, published 2005/06/15. It breaks the engine down assembly by assembly, listing the individual component part numbers alongside line drawings so the correct item can be identified before anything is ordered. This is a parts book, not a repair guide – it exists to answer one question precisely: which part number belongs on this engine.

File Details

• Manual type: Illustrated parts manual (parts catalog)
• Brand: Perkins
• Engine model: 1104C-44TA
• Build list / document reference: RJ51163
• Publication date: 2005/06/15
• Language: English
• Page count: Approximately 190 pages
• File format: PDF

Chapters Covered

• Short Engine
• Cylinder Block & Liners
• Crankshaft, Main & Big End Bearings
• Pistons & Rings
• Connecting Rods
• Rear End Oil Seal
• Cylinder Head Assembly
• Rocker Shaft Assembly
• Timing Gear & Camshaft
• Fuel Injection Pump
• High Pressure Fuel Pipes
• Atomisers
• Throttle & Stop Controls
• Pick-Up Sensor
• Boost Control Pipe
• Fuel Leak-Off Pipe
• Flywheel Housing
• Flywheel & Starter Ring
• Starter Motor
• Fan Drive
• Sump
• Dipstick & Filler Tube
• Oil Strainer
• Cylinder Head Cover
• Breather
• Blanking Plates
• Oil Cooler
• Oil Filter
• Remote Lubricating Oil Cooler
• Front End Drive Input
• Water Pump
• Pipes
• Water Outlet Housing
• Fan
• Alternator
• Alternator Bracket & Fixings
• Pulleys
• Timing Case
• Timing Cover
• Blanking Plugs
• Lubricating Oil Pump & Delivery Housing
• Turbocharger
• Feed Pipes
• Leak-Off Pipes
• Air Filters
• Pipework & Connections
• Exhaust Manifold
• Induction Manifold
• Air Charge Cooler
• Lift Pump
• Filter to Injection Pump Pipe
• Injection Pump to Filter Pipe
• Heater Plugs
• Engine Lifting Eyes
• Engine Mounts
• Heater Switch
• Lubricating Oil Pressure Switch/Gauge
• Temperature Gauge & Sender
• Radiator & Cowling
• Radiator Bracket & Fixings
• Radiator & Hoses
• Guards, Fuel Pre-Lift Pump, Water Trap
• Miscellaneous & Auxiliaries
• Top Service Kit
• Bottom Service Kit

Read as a whole, this Perkins 1104C-44TA parts manual gives a complete component-level map of the engine. The front section walks through the short engine, cylinder block and liners, crankshaft and bearing sets, pistons and rings, connecting rods and the rear end oil seal, then moves up through the cylinder head, rocker shaft, timing gear and camshaft. From there it follows the fuel side – injection pump, high pressure pipes, atomisers, throttle and stop controls, pick-up sensor, boost control and leak-off pipework – before covering the flywheel housing, flywheel and starter ring, starter motor and fan drive. The lubrication and cooling groups follow in the same pattern, and the book closes out with the air system, turbocharger feed and drain pipes, manifolds, air charge cooler, lift pump, engine mounts, gauges and senders, radiator and cowling, guards and the top and bottom service kits.

How the part numbers and illustrations work

Each section opens with an exploded or isometric illustration carrying item callouts, followed by a parts list that matches those callouts to part numbers, quantities and descriptions. That pairing is what makes the catalog usable in practice: you locate the assembly on the drawing, read the callout number, then find the corresponding line in the list. The illustrations are representational and are intended for identification only, so they show you what a component looks like and where it sits rather than how to install it.

The manual also carries the part-number history that matters when an engine has been built over a production run. Where a component was superseded, the earlier number is shown so that a part pulled from older stock or found on an earlier build can still be matched to its current replacement. Service options appear the same way – connecting rod kits are listed in grades, piston and ring kits in standard and oversize variants, and service kits are grouped so a complete set of consumables can be ordered in one go rather than piece by piece.

Who this Perkins 1104C-44TA parts book is for

This catalog suits anyone who has to order, cross-reference or verify Perkins 1104C-44TA components: workshop parts departments, rebuilders, agricultural and plant machinery engineers, and owners who prefer to source their own parts. It is equally useful when a machine arrives without paperwork and the correct part number has to be established from the engine itself.

One point from the publication is worth repeating plainly. The build list printed on the front of the parts book ties the catalog to a particular engine build, so the manual is applicable to that specific build rather than to every 1104C-44TA ever produced. Component fitment can change between builds, and Perkins advises checking with a local Perkins outlet for the latest information before purchasing parts. The engine is also expected to be serviced by fully trained personnel, with the relevant user service and maintenance manual consulted before any work begins.

Get the right part the first time

Guessing at a part number on a turbocharged diesel engine is an expensive habit – wrong gaskets, mismatched bearing grades and incorrect seals all cost time and money, and a returned part costs both twice over. Having the illustrated Perkins 1104C-44TA parts catalog to hand means every nut, bolt, gasket, bush, seal, pipe and kit can be confirmed against the drawing and the listed number before an order is placed, whether the job is a routine filter and gasket change or a full bottom-end rebuild.

IMAGES PREVIEW

The file is delivered as an instant PDF download after payment – no shipping, no waiting on a courier, no shelf space. Open it on a laptop or tablet in the workshop, zoom into the exploded views, print only the pages you need for the job in front of you, and keep the rest of the Perkins 1104C-44TA parts manual on file for the next one.