Schramm TXD Rig Parts Manual 2013 – Serial J135-0245 Mast Power Breakout Loadsafe PDF

Description

Schramm TXD Parts Manual – Serial J135-0245 (2013)

This is the parts book released with the Schramm TXD rig built as Serial J135-0245, printed for Geops Bolkan Drilling Services Ltd. and dated 03/11/13. Every assembly in the manual is keyed to a reference number, a Schramm part number, a quantity and a description, so a component pulled off the machine can be matched back to the exact item that belongs in its place. Because the rig was custom built, the book repeats the note that not every option shown will be present on every TXD – the Rig Build Components Listing in the appendix identifies which assemblies were actually fitted to this particular machine.

File Details

• Manual type: Illustrated parts manual (parts book)
• Brand / manufacturer: Schramm, Inc. – 800 East Virginia Ave., West Chester, PA 19380 USA
• Model: TXD series drilling rig
• Serial number: J135-0245
• Rig trailer VIN: 1K9AD40C4C3268165
• Rig specification version: Version D
• Language: English
• File format: PDF
• Approximate page count: 246 pages
• Document date: 03/11/13 (rig specification version dated 01/07/13)

Chapters Covered

The parts book is divided into four equipment chapters plus an appendix, matching the physical layout of the rig:

• Chapter 1 – Rig
  • Air Tank, Remote Startup Controls, Rotation Torque Limiter
  • Engine Airstart, Air Cleaners, Mounting, Muffler, Oil Pan Heater, Flywheel Pump Drive
  • Fire Suppression System, Foam Injection, Fuel Tanks, Heat Exchangers
  • Heater (Diesel Fired Coolant), High Pressure Fluid Line Plumbing
  • Hydraulic Gearbox, Hydraulic Pumps, Hydraulic Tank, Tank Heater
  • Manifolds – Drain, Case Drain, Hydraulic Thermal, High Pressure
  • Mini Substructure and Jack Legs, Mini Lube System
  • Front and Rear Outriggers, Power Slip, Pullback Limiter
  • Tool Box, Tool Lubricator, 3 Axle Trailer, Variable Speed Cooling Fan, Water Injection
• Chapter 2 – Mast
  • Mast Tilt Cylinders, Mast Locks, Mast Slide, Sheaves (Upper and Lower)
  • Top Head Gearbox Components, Gearbox Indicator, Tilting Head Components
  • Swivel Gearboxes, Gearbox Travel, Rotation Lock for DH Motor
  • Jib Boom and Jib Boom Stops, Auxiliary Winch, 9600 lb Winch, Survey Line Winch
  • Petol Rig Wrench, Breakout Arm, Plumbing, Subs, i-Control Mounting Components
• Chapter 3 – Power Breakout
  • Power breakout support and swivel assemblies
  • Jaw body, outer housing, connecting valve plates
  • Cylinder assemblies and flow divider
  • Jaw dies and tool-joint size configurations
• Chapter 4 – LoadSafe
  • Main Control Panel assembly
  • Left Hand and Right Hand Remote Control Panels
  • Tilt Control Panel and Control Panel Reference Information
  • Pipe Handler, Pipe Jaws, Jaw Sets, Pipe Racks, Pipe Stop Components
  • Front Outriggers, Operators Platforms, Platform Tilt Cylinders
  • Trailer Jacks
• Appendix
  • Rig Build Components Listing
  • Detailed Rig Specifications
  • Hoses
  • Filters
  • Decals
  • Nameplates
  • Hose End Designations
  • O-Ring Seal Sizes
  • Truck/Carrier OEM Specifications and Book Reference
  • Schematic Diagrams

Altogether this Schramm TXD parts manual gives a technician a complete numerical index to the machine as it was configured at build. Exploded assembly drawings sit alongside the tables so a part’s position inside the assembly is visible, not just its catalogue number, and the appendix cross-references the build-specific components, filters, hoses, decals and nameplates used on Serial J135-0245. The control panel reference information at the end of Chapter 4 additionally documents the directional control valve sections, lever kits, tie rod kits and relief valve assemblies used across the main, remote and tilt panels.

What This Parts Book Supports

Ordering the correct replacement is the single most practical use of this manual. Hydraulic pumps and motors, gearbox couplings, relief cartridges, check valves, cylinders, sheaves, wire rope, grease fittings, flange adapters, O-rings, seals and bearings are all listed with their Schramm part numbers. Because the valve banks on this rig are built from stacked Husco-style sections, the control panel reference material lets you identify the specific section, lever kit and relief assembly for each function rather than the whole bank.

Rebuild work benefits from the same structure. Seal kits, cartridge assemblies, spring and detent repair kits and piston-seal components are called out separately under their parent assembly, so a cylinder or valve can be serviced rather than replaced. Torque and adjustment values that appear in the book – relief valve pressure setting ranges, adjustment values per quarter turn, jam nut torque figures, cartridge installation torque – are reproduced with the assembly they belong to.

The appendix adds the paperwork side of a rebuild: the hose end designation codes, the O-ring size chart linking dash sizes and flange codes to Schramm O-ring part numbers, the complete filter schedule for hydraulic, engine and control panel filtration, and the full decal and nameplate listings used to restore the machine’s labelling.

Delivery

IMAGES PREVIEW

The Schramm TXD parts manual for Serial J135-0245 is delivered as an instant PDF download after checkout – no shipping, no waiting on a courier, no physical binder to store. It opens on a laptop, tablet or phone in the workshop, and any page or table can be printed and taken out to the rig.