STILL EGU 20 Electric Pallet Truck Spare Parts Catalogue – Series 0122 PDF

Description

STILL EGU 20 Electric Pallet Truck Spare Parts Catalogue – Series 0122

This is the complete spare parts catalogue for the STILL EGU 20 electric pallet truck, published under document number 5457963 (11.97). The catalogue is valid from factory number 710122004660 and covers the EGU 20 in its Series 0122 configuration. Every part is listed with its figure reference, part number, quantity, description, and remarks, with exploded-view illustrations showing exactly where each component fits. The document is presented in five languages — German, English, French, Spanish, and Italian — so the same catalogue works across workshops in multiple markets.

File Details

• Manual type: Spare Parts Catalogue (Ersatzteil-Liste / Catalogue de pièces détachées / Catálogo de recambio / Catalogo parti di ricambio)
• Brand: STILL
• Model: EGU 20
• Series: 0122
• Document number: 5457963
• Date: 11.97 (November 1997)
• Valid from factory number: 710122004660
• Languages: German, English, French, Spanish, Italian
• Page count: 115
• File format: PDF

Chapters Covered

• Motor Gearing
• Chassis; Bodywork and Fittings
• Undercarriage
• Controls
• Electric / Electronic
• Hydraulics
• Load Lift System
• Special Equipments

Motor Gearing

The catalogue opens with exploded views and part lists for the traction motor MEZ I (part number 6108385) and traction motor MEZ II (part number 6108386), covering every internal component from the commutator bearing and brush rocker to the terminal board, grooved ball bearings, carbon brushes, woodruff keys, and O-rings. The pump motor section follows with its own parts breakdown including carbon brush set, ball bearings, catch, and motor housing. Whether you are replacing worn brushes or rebuilding a motor, every part number and quantity is listed for direct ordering.

Gear Drive

The transmission section covers the gearbox, drive wheel, wheel nuts, locking screws, steering stops, slotted nut, and all associated bearings, washers, and seals. The exploded transmission diagrams show the complete gear train — from the conical ring gear and spur gear to the taper roller bearings and shaft seals — with a full list of shim rings and washers in multiple thicknesses for precise adjustment. This is the section you need when rebuilding the drive unit or chasing a noise or leak in the final drive.

Chassis; Bodywork and Fittings

Covers the cowl, hood options (ABS or metal, with or without battery charger), battery covers for both 180 Ah and 200 Ah batteries, hinges, pins, clamps, and button head screws. The foot protection section adds mudguard, bent part, solid rubber foot protection, and bracket. Panel and foam details are also included. These are the parts that protect the operator and the machine’s internals, and the catalogue gives you the exact part number for each configuration so you order the right hood or cover on the first attempt.

Undercarriage

This is where you find the drive wheel, stability wheel, pressure rod roller, pressure rod tandem, and load castor assemblies. The drive wheel section lists multiple tyre compounds — Vulkollan 93 Shore, polyurethane, rubber 75 Shore (including antistatic and non-marking variants), Greythane, Tractothan, and specialist wheels for slippery ground and tropical climates. The load castor assembly, rocker, bearing bushes, control rods in a wide range of lengths (from 617 mm up to 1909 mm), and all associated pins, spacers, and bolts are detailed. If you are replacing a wheel, rebuilding a castor, or ordering a control rod in a specific length, this chapter gives you the part number directly.

Controls

The control handle head and tiller section is especially detailed, covering the upper tiller part in both standard and cold store versions, handles, springs, cams, segmental washers, control shaft, catch, torsion spring, PC boards (standard and cold store), snap switches, microswitches, key switch, and the complete tiller assembly with gas strut, tiller bearing, cam, and microswitch. The brake section lists brake disc, rotor, friction plates (including cold store variant), hub, springs, and all fasteners. Every switch, spring, and cam in the control chain is individually listed so you can rebuild a tiller head or diagnose a control fault down to the component level.

Electric / Electronic

This chapter covers the control unit (COMBI Elektron and Curtis 803), key switch complete with key, LED, contactor, repair kit, control board, cable trees, battery cables (DIN 80A, DIN 160A, SBE 160A, SBE 320A), battery plugs and sockets, fuses, fuse holders, diodes, terminal boards, and the full harness assemblies. The built-in charger section lists battery charger, charging sets for lead, gel, and dry-flex batteries, charge regulator, and wiring. The cable tree diagrams show the complete wiring layout. If you are chasing an electrical fault, replacing a contactor, or rewiring a damaged harness, this section has the part numbers and the diagrams to guide you.

Hydraulics

The hydraulic unit section covers the pump motor, catch, way valve, lowering brake valve, relief valve, check valve, pump, filler neck, tank, air cleaner, air filter, and seal kit. The lift cylinder is covered in its own section with a complete cylinder assembly, cylinder barrel, rod (for both 120 mm and 130 mm lift), repair kit, and seals. The motor-pump unit, spherical washer, cone pan, O-ring, union, hose, and locking screws are also listed. This is the chapter for anyone rebuilding a hydraulic unit, resealing a lift cylinder, or replacing a pump motor.

Load Lift System

The load lift system section provides the complete lift cylinder assemblies for both the 120 mm and 130 mm lift versions, with cylinder barrel, rod, repair kit, and seal components listed separately. This allows you to order exactly the parts you need for a cylinder rebuild rather than a complete assembly.

Special Equipments

Nameplates, product identification plates, type plates, manufacturer plates, reflectors, labels (including cold store labels), logo plates, screen grids in H=1200 mm and H=2000 mm heights, and the battery transport wagon with its caster wheels and plugs. The part number index at the back of the catalogue lists every part number with its page reference, making it quick to jump straight to the right diagram.

Why This Parts Catalogue Matters

Ordering the wrong part for a pallet truck wastes time and money. This STILL EGU 20 spare parts catalogue eliminates guesswork by giving you the exact part number, the quantity required, and an exploded diagram showing where it fits. The catalogue covers the EGU 20 Series 0122 from factory number 710122004660 onward, with separate listings for different configurations — MEZ I and MEZ II traction motors, standard and cold store versions, ABS and metal hoods, 180 Ah and 200 Ah batteries, and multiple wheel compounds. The multi-language format means the same document works for workshops across Europe and beyond. Every part is indexed at the back so you can find what you need fast.

Get the Complete STILL EGU 20 Parts Catalogue

IMAGES PREVIEW

This PDF gives you the full spare parts catalogue for the STILL EGU 20 electric pallet truck — every component, every part number, every exploded view. Whether you are maintaining a fleet, rebuilding a drive unit, or simply replacing a worn wheel, the right part number is in here. Instant PDF download after payment, no shipping, no waiting. The file works on any device — laptop, tablet, or phone — and you can print the pages you need for the workshop. Order now and have the complete STILL EGU 20 parts reference at your fingertips.