Valtra N2 Series Direct Tractor Operator Manual – N122 D & N142 D

Description

Valtra N2 Series Direct Tractor Operator Manual – N122 D & N142 D

This 383-page operator’s manual is the complete documentation set for the Valtra N2 Series Direct tractors, covering the N122 D and N142 D models. Published by Valtra Inc. and carrying the document reference 39 845 21 2 (11/2009), it is the manual that accompanies the N2 Direct series from the factory. Every control layout, operating procedure, safety requirement, maintenance interval and technical specification for these tractors is contained in this single PDF.

File Details

• Manual type: Operator’s Manual
• Brand: Valtra
• Models covered: N122 D, N142 D (N2 Series Direct)
• Language: English
• Page count: 383
• File format: PDF
• Document reference: 39 845 21 2 (11/2009)
• Publisher: Valtra Inc., Suolahti, Finland

Chapters Covered

The Valtra N2 Series Direct operator manual opens with the hazard statement conventions and safety rules that govern every operation, then moves systematically through the machine:

• Safety precautions – hazard statements (danger, warning, caution, important, note), replacing safety and information signs, maintaining hardware safety, using tractor safety features, safe operating practices, driving on public roads, controlling driving speed, driving downhill, operating with implements, running PTO-driven implements, using ballast weights, towing, personal safety of others, fire hazards, handling viton seals
• Instruments and controls – pedals, dashboard, Proline instrument panel, indicator lights, right-hand controls, tractor terminal, driving controls, linkage controls, PTO controls, auxiliary hydraulic controls, rear controls, left-hand controls, roof console controls, air conditioning (manual and automatic), driver’s seats, rear mudguard controls, bonnet controls, rear external controls
• Operation – running the tractor in, preparing for use, seat and steering wheel adjustment, mirror adjustment, wipers, power shuttle lever, main switch, control stop, ignition switch, starting (normal, cold, auxiliary battery), lights, notification devices, heating and ventilation, power outlets, driving (steering, power shuttle, parking brake, standstill, clutch, braking, emergency brake, speed ranges, driving modes, transmission droop, speed balance, ECO/Power, engine brake, cruise control, traction force control, engine speed limiting, hydraulic front suspension, differential lock, four-wheel drive, driving start automatics, reverse drive system), Proline instrument panel display, A-pillar display, tractor terminal, rear linkage, three-point linkage, auxiliary hydraulics, front linkage, front loader, power take-off, U-Pilot headland automatics, implement signal connection, Valtra ISOBUS, towing devices, air pressure system, trailer
• Maintenance – maintenance schedule, service inspection, performing maintenance tasks, greasing, cleaning, recommended fuel and lubricants, storing the tractor, running in after storage, periodical maintenance, daily, weekly, 500-hour, 1,000-hour and 2,000-hour service intervals, checks and adjustments
• Faults and remedial actions – handling error situations, errors indicated by indicator lights, warning symbols, service codes, steering system malfunctions, towing the tractor
• Technical specifications – dimensions, weights, maximum permissible axle loading, tyres, wheel nut torques, front and rear axle tyre loadings and pressures, stud dimensions and spacing, track widths, engine, lubrication, fuel system, air cleaner, cooling system, electrical system, power transmission, power shuttle, clutch, gearbox, differential lock, rear and front PTO, brake system, steering system, powered front axle, turning circle, cab and shields, hydraulic system, rear linkage, front linkage, trailer hitches

Taken as a whole, this Valtra N2 Series Direct operator manual functions as the working reference for anyone running, maintaining or supervising an N122 D or N142 D. It explains not just what each control does but the sequence in which to use it – the correct way to run in the tractor during its first 50 hours, how the power shuttle engages at different speeds, when the standstill function holds and when it releases to the parking brake, how the automatic, semiautomatic and manual driving modes differ in their use of the transmission adjustment lever, how the U-Pilot headland automatic records and replays a working cycle, and how to read the Proline instrument panel, A-pillar display and tractor terminal together. The maintenance chapter alone provides a full periodical maintenance chart with intervals tied to running hours and the specific fluid types, capacities and torque values needed at each service.

What the Valtra N2 Series Direct Operator Manual Covers in Detail

On the operating side, the manual details starting under normal and cold conditions (including the glow indicator cycle), the four speed ranges (A, B, C, D) and their driving speed limits on both 40 km/h and 50 km/h models, the three driving modes and how the transmission adjusts to each, cruise control for both driving speed and engine speed with two memory slots each, the ECO/Power function, engine brake settings, the differential lock and four-wheel drive auto modes, the hydraulic front suspension with calibration procedure, and the reverse drive system with its separate rear controls. For implements, it covers the rear three-point linkage (category 3), the front linkage where fitted, the Valtra front loader with Softdrive and quick coupling plate, the rear and front power take-off (540/1000 rpm alternatives, 540E, proportional ground speed PTO), and the auxiliary hydraulic system with joystick and lever control, position locking, floating position and predefined factory/user settings.

On the maintenance side, the periodical maintenance chart covers daily, weekly, 500-hour, 1,000-hour and 2,000-hour intervals with every task listed against the appropriate interval. Beyond the chart, the manual gives step-by-step procedures for checking and changing engine oil and filter, transmission and hydraulic oil and filters, fuel filters and prefilter, air filters, coolant, brake fluid, front axle differential and hub oil, front PTO housing oil, belts, batteries and wheel nut torques. Checks and adjustments include tyre changing with tyre parameter setting and speed sensor calibration, track width tables for agricultural and industrial front axles and the rear axle, front wheel toe-in, steering angle, headlight adjustment, and trailer hitch adjustment.

Why This Manual Matters

The N2 Series Direct is a complex machine – continuously variable transmission, electro-hydraulic linkage and hydraulics, CAN-bus controlled valves, integrated ISOBUS – and much of its behaviour is governed by settings buried in the tractor terminal. Without the manufacturer’s own documentation, operators are left guessing at which driving mode suits which job, how to program the speed ranges, what the service codes mean, or how to recalibrate the front suspension after maintenance. This operator’s manual removes that guesswork. It gives the exact procedures in the order Valtra designed them, the exact fluid types and capacities, the exact service intervals, and the exact diagnostic steps for the fault conditions the tractor can report. Using the correct values and sequences protects the transmission, engine and hydraulic components from the kind of damage that only shows up after it is expensive to fix.

IMAGES PREVIEW

Instant PDF Delivery

The Valtra N2 Series Direct Tractor Operator Manual is delivered as an instant PDF download – no shipping, no waiting, no physical media to lose. Once payment is complete, the file is available immediately and can be opened on any device: desktop, laptop, tablet or phone. The PDF can be printed in full or in part if a paper copy is needed in the workshop or cab, and it can be stored on a USB drive or cloud folder for ongoing reference. Whether you are an owner-operator, a fleet manager, a technician or a dealer supporting Valtra N2 Direct tractors, this manual gives you the complete factory documentation for the N122 D and N142 D in a single downloadable file.