Bucyrus SKS-16 Rotary Blasthole Drill Parts Manual – S/N 1M67A95 PDF

Description

Bucyrus SKS-16 Rotary Blasthole Drill Parts Manual — Serial 1M67A95

This is the full illustrated parts manual for the Bucyrus SKS-16 Rotary Blasthole Drill built under serial number 1M67A95, released as Revision F by Bucyrus Mining Equipment, Inc., 3501 S. FM Hwy 1417, Denison, Texas. The document is organised into nine illustrated sections plus a general assembly list, and it lets a technician or parts department drill straight down from a major assembly to the individual nut, seal, hose, valve cartridge or fastener that has to be replaced. Everything is keyed to exploded drawings with item balloons, so the correct part can be identified on sight rather than guessed at from a photograph or a description.

File Details

• Manual type: Illustrated Parts Manual
• Equipment: Bucyrus SKS-16 Rotary Blasthole Drill
• Serial number: 1M67A95
• Revision: F
• Publisher: Bucyrus Mining Equipment, Inc. — Denison, Texas, USA
• Language: English
• File format: PDF
• Page count: 564 pages
• Section count: 9 illustrated sections plus general assembly list

Chapters Covered

• General Assembly List — filter kits (in-house and ship-out), fibreglass exhaust tape, RH rear walkway decking, cab decking stairs, RH walkway handrail, optional seat riser, optional headrest, engine modification kit, carousel stop, hydraulic schematic and base machine list
• Section 1 — Cab Assembly with Gauges and Attachments: seat with attaching hardware, seat air accumulator installation, engine gauge panel, hydraulic gauge panel, mast/jacks control, LH/RH propel and hoist/pulldown control, rotary rotation control, cab hose plumbing, electric hand control cab modification, heater and air conditioning installation with package list, air cleaner assembly, 24-volt condenser, wall mount unit with angle louvers, blower assembly, air conditioner hose kit, seat belt with tether, tinted cab glass installation, left/rear/right wiper and washer installations
• Section 3 — Mainframe / Crawler: mainframe/crawler installation, undercarriage assembly, final drive assembly with motor, hydraulic motor spare parts, track roller assembly, track idler assembly with fork, track assembly with shoes, counterbalance valve manifold, mast elevating cylinder assembly, pin retainer kit, propel plumbing, counterbalance valve with attachments (mast), dust seal kit, fuel tank installation (two tanks), jack installation, jack cylinder assembly, valve stand with valves and attachments, return manifold, drain manifold, jacks/mast control valve, directional control valve (hoist/pulldown), feed control valve (hoist/pulldown), six-station control valve, pilot control manifold with adapters, pilot control manifold with regen circuit, drain manifold (pilot control), valve stand plumbing, valve stand hose kit, dust collector/water injection valve assembly, viewing hatch door for the drill deck and its plumbing, RH and LH rear jack decking grating, LH and rear decking tube
• Section 4 — Engines / Compressors / Drives: engine group list, Cat C27 engine with attachments, pump drive gearbox-to-engine coupling, driveline guard installation, belt guard assembly, coolant conditioner filter assembly, engine air cleaner installation and assembly, air cleaner rain shield assembly (SG29), engine water piping assembly, cooler installation, engine radiator / system hydraulic oil cooler / charge air cooler, radiator assembly, system hydraulic oil cooler assembly, charge air aftercooler assembly, fan motor, motor check valve assembly, thermostat valve, engine charge air piping, muffler installation, air compressor group list, air compressor with attachments (1500/350), air compressor package service items, compressor air end attachments, compressor receiver tank assembly, regulator/control panel assembly (HP DC), discharge valve assembly, torsional drive coupling, compressor air cleaner installation and assembly with rain shield (SG20), compressor/air receiver piping, main air manifold assembly, hydraulic filter assembly for the compressor, cylinder assembly, compressor cooler installation with plumbing, cooler assembly (engine/compressor/hydraulic system), charge air aftercooler assembly, system hydraulic oil cooler assembly, pump drive assembly, pump drive gearbox (4 pad), input line shaft group, main pump closed loop, high pressure end flange plugs and valves, main pump control assembly, filter elimination block spare parts, charge/pilot pump spare parts, gear fan pump, dust collector/water injection pump, main pump open loop, proportional controller assembly
• Section 5 — Dust Control: water injection system, water pump installation, hydraulic motor, flow control valve, dust collector/water injection valve assembly with and without attachments, dust curtain raise/lower assembly (hydraulic activation), dust curtain installation, front dust curtain assembly, dust curtain hose plumbing
• Section 6 — Mast: mast group list, 15 meter mast assembly, mast pivot weldment, pipe rack pivot tube support weldment, hoist and pulldown cylinder assembly, pin retainer kit for hoist and pulldown cylinder, cylinder guide roller assembly, 9-station control valve installation and assembly, auto tool wrench installation and plumbing, hydraulically operated breakout wrench installation, plumbing and hose plumbing, 4 1/2 inch bore swing cylinder, 5 inch bore rotate/telescoping cylinder, 4 inch bore clamp cylinder, winch installation and assembly, brake valve assembly, pipe positioner installation, swing cylinder, pipe positioner sensor kit, rotary drive assembly and gearcase, hydraulic winch motor, winch plumbing, pipe rack installation, swing cylinder, index cylinder, pipe rack swing plumbing, pipe rack lock plumbing, pipe positioner plumbing, mast hose plumbing, pipe rack index plumbing, mast tubing, front mast rest installation, dust hood assembly
• Section 9 — Electrical: wiring diagrams and components, cab wiring harness, engine skid/cab wiring harness, cab/valve bank wiring harness, mast wiring harness, cab/drill propel valve wiring harness, engine skid/engine/air conditioner wiring harness, front of machine lights wiring harness, dust collector to engine wiring harness, battery box assembly, battery/engine disconnect installation, 24 VDC / 12 VDC converter installation, electronic DC/DC 10 amp converter, additional lighting kit, remote engine start assembly, ground level kill switch installation

What this parts manual gives a technician is a single, serial-number-specific reference for the whole machine. Because the entire document is built around the SKS-16 as it left the factory under 1M67A95, every assembly drawing, part number and quantity reflects the machine as built rather than a generic family overview. That is the difference between ordering a seal kit and ordering the right seal kit.

Who This Parts Manual Is For

This book suits the shop that already runs an SKS-16 and needs to keep it running. The rotary drive gearcase, the hoist and pulldown cylinders, the pipe rack and pipe positioner, the breakout wrench, the auto tool wrench, the mast, the undercarriage and the air compressor all appear as complete breakouts, so the person ordering parts can read the drawing, find the balloon, look up the part number and quantity, and place the order the same day.

The electrical and hydraulic content is particularly useful. Wiring harness assemblies are broken down by wire colour, gauge and terminal designation — cab harness, mast harness, valve bank harness, engine skid harness and dust collector harness are all itemised — and the hydraulic side is supported by hose assemblies listed by part number with their fitting codes and lengths. That level of detail means the manual doubles as a reference for tracing a fault, not just for buying replacement parts.

Rebuild, Repair and Maintenance Support

A 564-page parts breakdown of this depth supports real work: changing out a final drive, rebuilding an idler, replacing a mast elevating cylinder, resealing a hoist and pulldown cylinder, servicing the hydraulic filters and suction manifold, replacing dust curtain cylinders, inspecting the carousel lock, or working through the charge and pilot pump on the closed loop main pump. Cylinders and gearcases in this manual are broken down to seal, wear ring, back-up ring, rod, piston, head and tube level, which is exactly what is needed when a seal kit has to be ordered for a specific bore and stroke rather than guessed at.

IMAGES PREVIEW

Instant PDF Delivery

The manual is supplied as a downloadable PDF. There is no shipping, no waiting, and no physical binder to lose in the workshop. It opens on a laptop, tablet or phone at the machine, and any page can be printed for the job at hand — a useful habit when the same exploded view is needed on the deck and again in the office. Buyers receive the file immediately after checkout.