Case 440 & 440CT Series 3 Parts Catalogue PDF – Complete Illustrated Parts Manual for Skid Steer & Compact Track Loader

Description

Case 440 & 440CT Series 3 Parts Catalogue — Complete Illustrated Parts Manual

This is the complete Case 440 & 440CT Series 3 Parts Catalogue, a fully illustrated parts manual covering every major assembly, sub-assembly and component of the 440 skid steer loader and 440CT compact track loader (Series 3). Whether you are rebuilding a final drive, ordering a hydraulic hose, tracking down a seal kit or identifying a single bracket bolt, this catalogue gives you the exploded diagrams, part numbers, quantities and serial-number breakdowns you need to get the right part first time.

File Details

• Manual type: Illustrated Parts Catalogue
• Brand: Case (CNH Industrial)
• Models covered: 440 Skid Steer — Series 3; 440CT Compact Track Loader — Series 3
• Serial applicability: 440 NA ASN N8M474469, 440 EU ASN N8M407542, 440CT ASN N7M483467
• Language: English
• Page count: 1,226 pages
• File format: PDF
• Publication reference: 31.220.AD (10/2014 edition, updated 1/2021)

Chapters Covered

• 00 — Initial Stocking List (ISL) and Filters & Capacities
• 02 — Engine: Cylinder Block, Cylinder Head, Oil Pump, Cooling System, Turbocharger
• 03 — Fuel System: Lines, Filters, Injection Pump, Injectors
• 04 — Electrical: Starter, Alternator, Battery, Harnesses, Cab Electronics
• 06 — Power Train: Joystick Controls, Hydrostatics, Pumps, Motors, Drive Line, Final Drive
• 07 — Brakes
• 08 — Hydraulics: Tilt, Lift, Auxiliary, Control Valves, Cylinders, High Flow
• 09 — Chassis: Loader Lift, Couplers, Buckets, Cab, Windows, Seats, Decals
• 10 — Kit, CP Cab Sealing
• 05.100.03 — Filters & Capacities
• 88.xxx, 95.xxx — Accessories and CE Attachments

00 — Initial Stocking List and Filters & Capacities

The opening chapter gives you the initial stocking list (ISL) for North American 440 and 440CT models, followed by a consolidated filters and capacities section. Here you will find the correct engine oil filter, air filters (inner and outer), cab charcoal filter, hydraulic oil filter, transmission filter, fuel filter and the fluid capacities for the engine crankcase, hydraulic reservoir and final drives across the different 440 and 440CT configurations. The ISL also lists frequently replaced service parts — hoses, belts, fuses, relays, bulbs, seals and batteries — making this the first stop for routine maintenance planning.

02 — Engine

The engine chapter covers the 4.5 L four-cylinder NEF engine used in both the 440 and 440CT Series 3. Every external and internal component is broken down with exploded diagrams and part numbers: cylinder block, gear covers, flywheel housing, cylinder head assembly (valves, springs, rocker shaft, push rods), pistons and connecting rods, crankshaft and bearings, camshaft, oil pump and pan, oil filter and cooler assembly, engine mounts, turbocharger and plumbing, water pump, thermostat, fan drive and cooling system components. The chapter also covers the engine electrical system, cylinder block stiffener plate, breather, and motor sensors for engine oil.

03 — Fuel System

Fuel system coverage spans the complete fuel delivery path: fuel lines and filter, foot and hand throttle controls, fuel injection pump and its control components, fuel pump, fuel supply and drain lines, and the injectors with their sealing washers. Exploded views identify every banjo bolt, sealing washer, tube nut, clip and fitting so you can reseal or replace individual components without replacing the whole assembly.

04 — Electrical System

This chapter covers the starter and alternator, alternator mounting, battery and cables, the main engine harness, grid heater, chassis electrical distribution, fuse box with its relay and fuse layout, cab electrics, left and right consoles, control handles in basic and deluxe configurations, remote jump start disconnect, work lights, road lights for both North American and European markets, headlamps, rear lights, backup alarm, accessory socket, horn, front auxiliary electrics, rotating beacon, and Italian-market license plate and brake light harnesses. Fuse box diagrams show the physical layout of relays and fuses.

06 — Power Train

This is the largest technical chapter and covers both the hydrostatic drive and the control systems. Topics include joystick control plumbing in H-pattern and ISO-pattern, joystick valve kits, hydrostatic pump supply and return circuits for both the 440 and 440CT, pump mounting, drive motors (single-speed and two-speed, mechanical and pilot control), case drain circuits, multi-valve assemblies, resonators for European models, oil cooler bypass, filter assembly and mounting, tandem pump breakdowns for Rexroth units, internal gear pumps, rotary groups, hydraulic controls, control cartridges with orifice, gear pumps with and without high flow, motor assemblies (single-speed, two-speed and Rexroth/Bonfiglioli for the 440CT), drive line, axle assembly, wheels, rubber tracks for the 440CT, and final drive components including idlers, sprockets, track rollers, tensioners and frames.

07 — Brakes

The hydraulic brake system chapter covers the charge circuit, brake valve, pressure switch, solenoid, coils and all connecting hoses and fittings for the brake system on both 440 and 440CT machines.

08 — Hydraulics

Covers the complete loader hydraulic system: tilt and lift circuits, case drain (standard and high flow), ride control, self-leveling, secondary front auxiliary, implement and attachment hydraulics for pilot and mechanical control machines, proportional and electro-hydraulic auxiliary systems, coupler system hydraulics (including the Italian variant), tilt and lift cylinders, high flow supply and return circuits, high flow auxiliary and control valve assemblies, and the full family of control valves — manual, pilot, EH and high-flow variants. Each control valve is further broken down into seal replacement kits, main relief valve, workport relief valves, spool end groups, check valve groups and EHPV spool end groups.

09 — Chassis

The chassis chapter covers the loader lift assembly, lift cylinder covers, mechanical and hydraulic couplers, buckets (dirt/foundry, low profile, utility/light material and heavy duty) with bolt-on cutting edges, pallet forks, controller mounting for pilot control machines, right and left consoles, 440 and 440CT chassis, loader and ground drive controls, linkage, auxiliary hydraulic controls, hood, rear door (standard and louvered European version), rear door lock, cab door mounting and hardware, cab door wiper system, demolition door, floor mat, cab frame and seat bar, ROPS pivot assist, seat belts (lap and shoulder), mirrors, seat mounting for standard, suspension and deluxe suspension seats, rear window (standard and HVAC), top window, side windows, headliner, interior trim, radio and speakers, heater and air conditioning assemblies, heat shield, soundproofing and noise control, front lift hook and the full decal set across all supported languages.

10 — Kit, CP Cab Sealing

A focused chapter listing the components in the CP cab sealing kit, including seals, covers, gaskets, foam insulation and fasteners used to seal the operator cab.

05.100.03 — Filters and Capacities

Separate filters and capacities tables are provided for the 440 CT, 440 Series 3, 440 Tier 3, 440CT Series 3 and 440CT Tier 3, listing the correct filter part numbers for engine oil, air (inner and outer), cab air, hydraulic oil and fuel, along with the recommended fluid types and capacities for the engine crankcase, hydraulic reservoir, final drives and chain tank, plus the specified grease.

Accessories and CE Attachments

The accessories section covers DIA noise reduction kits for North America, the on-road Italian DGM kit and the front door kit. The CE attachments section lists the available attachments for the 440 and 440CT including adapter plates, auger drives and bits, auto rakes, backhoes with mounting kits, buckets and thumbs, bale handlers and spears, angle brooms, hopper brooms, pick-up brooms, 4-in-1 buckets, power side discharge buckets, chippers, cold planers (high flow and standard flow), concrete buckets and claws, dozer blades, grader rakes, brush grapples, log grapples, scrap grapples, Harley power box rakes, hydraulic hammers and tools, lift booms, load monitors, manure forks and scrapers, and snow pusher attachments. Each attachment entry gives the attachment part number, the required hydraulic configuration and the machine model compatibility list.

Why This Parts Catalogue Matters

Ordering the wrong part costs time, money and goodwill. This Case 440 & 440CT Series 3 Parts Catalogue eliminates guesswork by pairing every part number with an exploded illustration and a serial-number reference where applicable. You see exactly how the assembly goes together, which fasteners and seals are used at each joint, and whether a component is sold individually or only as part of a kit. For shops running both wheeled 440 and tracked 440CT machines, the catalogue covers both in one document with clearly marked model applicability.

IMAGES PREVIEW

Instant PDF Delivery — Print It, Search It, Take It Anywhere

This is a digital PDF download — no shipping, no waiting, no physical binder to lose on the shop floor. After checkout you can open the file immediately on any device: laptop, tablet or phone. Print individual pages for the job at hand, or print the whole 1,226-page catalogue and keep it in the shop. Page layout follows the original factory structure, so the chapter and figure references remain intact. When you need to quote a repair, plan a rebuild or hand a parts list to the counter, the Case 440 & 440CT Series 3 Parts Catalogue is the reference that keeps your jobs moving.