Case IH Farmall 85C 95C 105C 115C Tractor Service Manual – Hi-Lo, Mechanical and Power Shuttle Transmission

Description

Case IH Farmall 85C 95C 105C 115C Tractor Service Manual

File Details

• Manual Type: Service Manual
• Brand: Case IH
• Models: Farmall 85C, 95C, 105C, 115C
• Transmission Variants: Hi-Lo transmission [ZxJV0xxxx], Mechanical or Power Shuttle transmission [ZxJV5xxxx]
• Language: English
• Page Count: 3221
• File Format: PDF
• Document Number: 47840678
• Date: March 2015
• Replaces Part Number: 47561951

Chapters Covered

• Engine – 10: Engine and crankcase, Fuel tanks, EGR-DPF exhaust treatment, Engine cooling system, Fan and drive, Aftercooler
• Clutch – 18: Clutch mechanical release control, Clutch hydraulic release control, Clutch and components
• Transmission – 21: Mechanical transmission external controls, Power shuttle transmission, Master clutch housing, Power shuttle transmission external controls, Power shuttle transmission internal components, Creeper, Reverser, Hi-Lo unit, Transmission cooler and lines, Transmission/Rear drive, Transmission/Rear drive internal components, Transmission generic sub-group
• Four-Wheel Drive (4WD) System – 23: Mechanical control, Electro-hydraulic control, Drive shaft
• Front Axle System – 25: Powered front axle, Front bevel gear set and differential, Final drive hub, steering knuckles, and shafts, Non-powered front axle
• Rear Axle System – 27: Rear bevel gear set and differential, Planetary and final drives, Powered rear axle
• Power Take-Off (PTO) – 31: Rear mechanical control, Rear electro-hydraulic control, One-speed rear PTO, Two-speed rear PTO, Front PTO
• Brakes and Controls – 33: Hydraulic service brakes, Parking brake or parking lock
• Hydraulic Systems – 35: Hydraulic systems, Fixed displacement pump, Front hitch controls and lines, Remote control valves, Three-point hitch control valve, Three-point hitch cylinder, Front loader arm hydraulic system, Front loader bucket hydraulic system
• Hitches, Drawbars, and Implement Couplings – 37: Drawbars and towing hitches, Rear three-point hitch, Rear three-point hitch linkage, Front hitch, Front hitch linkage
• Steering – 41: Steering control, Tie rods, Hydraulic control components, Pump, Cylinders
• Wheels – 44: Front wheels, Rear wheels
• Cab Climate Control – 50: Heating, Ventilation, Air conditioning
• Electrical Systems – 55: Harnesses and connectors, Engine starting system, Alternator, Battery, Electronic modules, Rear PTO control system, Warning indicators, alarms, and instruments, FAULT CODES
• Front Loader and Bucket – 82: Arm, Bucket, Front loader and bucket generic sub-group
• Platform, Cab, Bodywork, and Decals – 90: Cab, Cab interior, Cab interior trim and panels, Cab doors and hatches, Operator platform less cab, Engine hood and panels, Engine shields, hood latches, and trims

This Case IH Farmall 85C 95C 105C 115C Tractor Service Manual is a complete 3221-page workshop reference covering every major system on these tractors equipped with Hi-Lo, mechanical, or power shuttle transmissions. The document is divided into numbered sections that follow the standard Case IH service grouping system, allowing you to move directly to the system you need without searching through irrelevant material.

The engine section (10) provides complete removal, installation, disassembly, and assembly procedures for the engine and crankcase, along with fuel tank service, exhaust gas recirculation and diesel particulate filter treatment, cooling system maintenance, fan and drive service, and aftercooler procedures. The engine link table near the front of the manual identifies the specific F5DFL413 engine variants matched to each Farmall 85C, 95C, and 105C model configuration, so you can confirm your exact powerplant before beginning work.

Transmission coverage (21) is especially thorough, reflecting the three transmission options available across this model range. Whether your machine uses the Hi-Lo transmission or the mechanical or power shuttle transmission, the manual gives you access to external control adjustment, internal component overhaul, power shuttle clutch pack service, creeper, reverser, and Hi-Lo unit procedures. The master clutch housing section covers the clutch housing itself along with transmission housing removal and installation for both mechanical and power shuttle variants. Torque values for the clutch case to rear transmission case retaining screws, torsion coupling fixing screws, and locking ring nuts are all listed in the specification tables.

The driveline chapters cover the Four-Wheel Drive system (23) with both mechanical and electro-hydraulic control variants, the front axle system (25) including the powered front axle, bevel gear set and differential, final drive hubs, steering knuckles, shafts, and the non-powered front axle option, and the rear axle system (27) with the rear bevel gear set and differential, planetary and final drives, and the powered rear axle. Each section includes general specifications, torque tables, and detailed service procedures.

Power Take-Off coverage (31) spans rear mechanical control, rear electro-hydraulic control, one-speed rear PTO, two-speed rear PTO, and the front PTO option. The brake and controls section (33) covers hydraulic service brakes with adjustment, bleeding, and component replacement procedures, along with the parking brake or parking lock. Hydraulic systems (35) are comprehensively addressed, including the fixed displacement pump, front hitch controls and lines, remote control valves, three-point hitch control valve, three-point hitch cylinder, and the complete front loader arm and bucket hydraulic systems.

Steering (41) covers the steering control, tie rods, hydraulic control components, pump, and cylinders. Wheels (44) covers front and rear wheel service. Cab climate control (50) addresses heating, ventilation, and air conditioning service procedures. The electrical systems chapter (55) is particularly extensive, covering harnesses and connectors, engine starting system, alternator, battery, electronic modules, rear PTO control system, warning indicators, alarms, and instruments, and a complete fault code diagnostic section that allows you to read and clear stored fault codes through the HH diagnostic menu.

Front loader and bucket coverage (82) includes arm, bucket, and generic sub-group procedures. Platform, cab, bodywork, and decals (90) addresses cab removal and installation, cab interior, trim and panels, doors and hatches, operator platform for less-cab models, engine hood and panels, and engine shields, hood latches, and trims.

What This Case IH Farmall Service Manual Enables You to Do

With this Case IH Farmall 85C 95C 105C 115C service manual at hand, you can perform major engine overhauls, transmission rebuilds, clutch replacement, hydraulic system repairs, electrical diagnostics, and routine maintenance on these tractors. The procedures are written with the working technician in mind: each operation lists the prerequisite steps, the specific tools required, the components to remove or disconnect, and the torques or specifications that apply.

For transmission work in particular, this manual is invaluable. The power shuttle transmission section covers external controls adjustment, internal component disassembly, clutch pack overhaul, and reassembly with the correct sequence and torque values. The Hi-Lo unit and creeper sections provide the same depth. If you are rebuilding a Farmall 85C or 95C transmission, the step-by-step procedures and exploded views give you the information needed to complete the job correctly.

The electrical systems chapter includes a full fault code section that maps diagnostic trouble codes to their possible causes and corrective actions. This allows you to systematically diagnose electrical faults using the HH menu access procedure, read stored fault codes, perform switch and sensor diagnostics, and clear codes after repair. For tractors equipped with the Analog Digital Instrument Cluster (ADIC) and Central Control Unit (CCU), the manual provides detailed calibration procedures for transmission clutches, EDC hydraulic valves, and other critical systems.

Why Correct Procedures and Specifications Matter

These Farmall C series tractors use precision-engineered components with specific clearances, torque values, and adjustment procedures. Using incorrect specifications or skipping calibration steps can lead to premature failure of clutches, hydraulic valves, or electronic control modules. The Case IH Farmall 85C 95C 105C 115C repair manual provides the manufacturer-specified values for every critical adjustment, from engine bearing clearances to transmission clutch calibration currents to hydraulic relief valve settings.

For example, the transmission calibration procedure requires specific oil temperature conditions, engine speed ranges, and clutch engagement sequences. This manual describes the complete process, including the U-code error messages that can appear if conditions are not met. Similarly, the EDC hydraulic lift calibration requires specific potentiometer settings and test weight conditions. Having the correct procedure prevents damage and ensures the system operates as designed.

IMAGES PREVIEW

Instant PDF Delivery

This Case IH Farmall 85C 95C 105C 115C service manual PDF is available for immediate download after purchase. The 3221-page document is delivered as a single PDF file that can be viewed on any computer, tablet, or smartphone. You can print individual pages or entire sections as needed for use in the workshop, and the file is yours to keep for future reference. No shipping, no waiting — just instant access to the complete service information for your Farmall C series tractor.