Gehl SL7810E Skid-Steer Loader Parts Manual 917222 Rev C – PDF Download

Description

Gehl SL7810E Parts Manual – 917222 Rev C

This is the complete Gehl parts manual for the SL7810E and SL7810E (EU) skid-steer loaders, published under document number 917222/CP0507 at Revision C. It is the parts reference used to identify, order and replace components on these machines, with every assembly broken down into its individual parts, complete with Gehl part numbers, descriptions, quantities and exploded-view illustrations.

File Details

• Manual type: Parts Manual
• Brand: Gehl
• Models covered: SL7810E, SL7810E (EU)
• Document number: 917222/CP0507
• Revision: Rev C
• Language: English
• Page count: 210
• File format: PDF

Chapters Covered

• Introduction
• Section B: Hydraulic Components
• Section C: Kits
• Section D: Schematics
• Numerical Index
• O-Ring Table, Coupling & Adapter Torque Table
• Torque Specifications Table

Section B: Hydraulic Components

Section B covers the hydraulic system in full detail. It includes complete parts breakdowns for the drive motor and parking brake in both single-speed and two-speed configurations, the tandem pump, the load-sensing axial piston pump, the self-level valve, the lift and tilt solenoid valves, the brake solenoid valve, the ROPS lift-assist pump valve, the lift cylinder, the tilt cylinder, the main control valve, and the Hydraglide ride control manifold. Each assembly is illustrated with exploded views and part callouts, with corresponding part numbers, descriptions and quantities listed alongside. Pressure settings and torque values are noted where applicable, including charge pressure, tandem relief settings and control valve relief pressures.

Section C: Kits

Section C lists the complete accessory and option kits available for the SL7810E. It covers the backup alarm kit, strobe light kit, rear view mirror kit, cab side window kit, cab front door kit, impact resistant door kit, single point lift kit, pre-cleaner kit, electric ROPS/FOPS lift kit, Power-A-Tach kit, backup alarm kit for joystick controls, seat belt kit, shoulder belt system kit, seat kits in standard and suspension versions, cab heater kit, HVAC kit, engine block heater kit, radio AM-FM-WB kit, cab sealing kit and deluxe cab filter kit. Each kit entry includes its part number, a list of included components and, in many cases, an exploded-view illustration showing how the kit assembles to the machine.

Section D: Schematics

Section D contains the full system schematics for the SL7810E. It includes the hydrostatic and hydraulic schematic for standard controls, the hydrostatic and hydraulic schematic for joystick controls, the HVAC schematic for kit 810854, the heater schematic for kit 810856, the ROPS/FOPS electrical schematic and the chassis electrical schematic. These schematics show circuit routing, component relationships, wire colors and numbers, hydraulic flow paths and connector pinouts, making them useful for diagnosing electrical and hydraulic faults as well as for verifying correct assembly after repairs.

Parts Listings by System

Beyond the lettered sections, the manual contains detailed parts listings for the machine’s major systems. The engine section covers the Cummins B4.5T engine installation, including mounts, flywheel housing, coupler, alternator, starter, filters, fuel lines and the idle and high-idle RPM chart for both standard and EU models. The chassis and body section covers the covers, grilles, latches, floor plates, consoles and control covers for hand and foot, joystick and dual hand configurations. The drivetrain section covers the axle assemblies, sprockets, chains and wheel hardware. The lift arm, All-Tach and auxiliary hydraulic sections cover the front-end assemblies, timing links, cylinders and couplers. The controls section covers the T-bar, hand and foot, dual hand and joystick control assemblies, including pedals, levers, cables, rods and linkages. The ROPS and interior section covers the ROPS structure, windows, headliner, air ducts, seals and sound pads. The seat and seat belt section covers standard and suspension seats, retractor mounts, 2-inch and 3-inch seat belt assemblies, plus the 3-point restraint system option. The electrical section covers the battery, cables, relays, fuses, switches, harnesses, sensors and lights, with separate schematics for the ROPS and chassis circuits. The wheel section covers the various tire and wheel assemblies available for the SL7810E.

Reference Tables and Index

The manual includes a numerical index that lists every part number in the manual alongside its page and reference number for fast lookup. It also includes an O-ring table with fitting thread sizes and dimensions, a recommended coupling and adapter installation torque table for SAE O-ring boss and JIC 37° and 45° fittings, and a comprehensive torque specifications table covering both metric and unified national thread fasteners across multiple grade ratings.

Why This Parts Manual Belongs in Your Shop

Whether you run a fleet of SL7810E loaders, maintain a single machine or restore an older unit, having the correct parts reference saves time and prevents costly mistakes. This manual lets you identify the exact part number you need before placing an order, verify that a component is correct for your machine’s configuration and serial number range, and understand how assemblies fit together before you start disassembly. The exploded-view illustrations make it easy to see how components relate, and the included serial number notes help you match parts to early and later production machines.

IMAGES PREVIEW

Delivered as an instant PDF download, this Gehl SL7810E parts manual is available immediately after purchase. There is no shipping, no waiting and no physical book to store. You can view it on a laptop, tablet or smartphone in the shop, print the pages you need for a job, and keep the complete parts reference on hand for every repair, rebuild and maintenance task.