Liebherr LR 1300 SX W Crawler Crane Operating Manual 2010 – Serial 138 091

Description

Liebherr LR 1300 SX W Crawler Crane Operating Manual – Serial 138 091

This is the complete operating manual for the Liebherr LR 1300 SX W crawler crane, issued 2010-07-21 for machine serial number 138 091. The document was prepared by the LWN / Technical Publication Department and covers every phase of the machine’s working life: from the product description and safety instructions through to daily operation, fault diagnosis, operational planning, assembly and dismantling, transport, and the full maintenance schedule. It applies to the LR 1300 SX W crawler crane with the 2821 main boom system, luffing jib configurations, fixed jib configurations, and Midfall arrangements.

File Details

• Manual type: Original Operating Manual
• Brand / Manufacturer: Liebherr-Werk Nenzing GmbH
• Product type: Crawler crane
• Product designation: LR 1300 W V006
• Type: LR 1300 SX W
• Serial number: 138 091
• Issued: 2010-07-21
• Version: f Auslieferung
• Language: English
• Page count: Approximately 1,095 pages
• File format: PDF

Chapters Covered

• 1 Product description – type plate, declaration of conformity, appropriate use, whole machine overview, engine, hydraulic system, winches, swing, crawlers, safety equipment, monitoring installations, basic machine, boom heads, 2821 main boom, reducing piece, 1713/1507/1008/0906 fixed jibs, 2316/1916 luffing jibs, Midfall, auxiliary jibs, pendant straps (steel and carbon-fibre), mid-point suspensions, rope fixation, pulley blocks and hooks, abseiling device, safety barrier, tagline winch, cab equipment, Litronic control system
• 2 Safety instructions – technical condition, areas of responsibility, requirements to personnel, personal protective equipment, work area, danger zone, safety signs, hazards (mechanical, electrical, hydraulic, burns, chemical, fire, poisoning, electromagnetic, wind, snow and ice, ground bearing, lightning, overhead power lines, environment), dangerous situations, hand signals
• 3 Control and operating elements – undercarriage, uppercarriage, operator’s cab, left-hand and right-hand control levers, foot pedals and hand levers, control panels X11/X12/X23, monitor, cable remote control, radio remote control, emergency operation controller, hydraulic cab elevation, auxiliary heating, video surveillance, central lubrication, floodlights
• 4 Operation – monitor and control panels, operator’s seat, lighting, windscreen wiper system, ventilation/heating/air-conditioning, auxiliary heating, additional cab equipment, cab tilting, hydraulic cab elevation, central lubrication, daily inspections, daily start up, selecting operating mode, programming the setup, load moment limiter, calculating load charts, taring, single and two-hook operation, crawlers, swing, main boom, jib, winch 1 and winch 2, free-fall operation, winch synchronisation, blocked crawlers, assembly cylinder, refuelling, radio remote control, rope measuring system, ground pressure display, inclination display, boom radius limitation, swing limitation, tagline winch, sensitive hoisting, abseiling device, shutdown, emergency stop, emergency operation controller
• 5 Operational faults, diagnosis – malfunctions, error displays on the monitor, troubleshooting, Litronic testing system, fuses
• 6 Operational planning – safe assembly and disassembly, assembly site, tools required, required hoisting rope length, choosing hook or pulley block, positioning the hook, restrictions due to wind, traveling on gradients, rigging material
• 7 Assembly and dismantling – basic machine, 2821 main boom, main boom + reducing piece, 1713 fixed jib, 1507 fixed jib, 1008 fixed jib, 0906 fixed jib, 2316 luffing jib, 1916 luffing jib, Midfall variants, adjusting the track, hydraulic cab elevation system, break-in protection, time-saving reconfiguring, disassembly procedures
• 8 Transport – loading the basic machine (with and without crawler side frame, carbody counterweight, rear counterweight), transporting with a low loader, transporting boom sections, transporting pendant straps
• 9 Maintenance – maintenance and inspection schedule, lubricants and consumables, diesel engine, fuel system, air filter, particle filter, cooling system, distributor gearbox, swing, swing connection, hoisting winches, boom luffing winches, rope reeving winch, tagline winch, crawlers, lifting device, hook/pulley block, hydraulic system, hydraulic oil tank, hydraulic filter, hydraulic cylinders, electrical system, batteries, lighting, limit switches, emergency stop, fire extinguishers, personal protective equipment, safety signs, steel structure, repair welding, main boom, jib, A-frame 1, tilting-back supports, steel pendant straps, carbon-fibre pendant straps, lubrication system, ropes, rope drive, rope pulleys, rope suspension and rope fixation, operator’s cab, operator’s seat, heating/ventilation/air-conditioning, machine care

This Liebherr LR 1300 SX W operating manual gives the technician the full working picture of the crane: the 2821 main boom, the 2821/2316 reducing piece, the 1713, 1507, 1008 and 0906 fixed jibs, the 2316 and 1916 luffing jibs, the Midfall configurations, the auxiliary jib options, the pendant strap systems, the hydraulic and electrical systems, the Litronic control system, the load moment limiter, and the complete maintenance and inspection programme. Every procedure is laid out in the order in which it must be carried out, including the critical angles, boom radius limits, wind speed restrictions, counterweight configurations, and gradient limits that govern safe operation.

What This Manual Enables You To Do

The Liebherr LR 1300 SX W crawler crane operating manual supports the full range of jobs on this machine: daily inspections and start-up, selecting and programming the setup, calculating load charts, single and two-hook operation, free-fall operation, winch synchronisation, blocked crawler work, boom radius and swing limitation, tagline winch operation, sensitive hoisting, shutdown procedures, emergency stop and emergency operation, fault diagnosis, operational planning, assembly and dismantling of the main boom, reducing piece, fixed jibs, luffing jibs and Midfall, transport loading, and the complete maintenance schedule.

Having the correct Liebherr procedures and specifications to hand matters on a machine of this size. The manual gives you the exact torque values, pressures, capacities, lubrication points, rope reeving diagrams, assembly positions, mid-point suspension lengths, pendant strap configurations, and limit switch settings that keep the crane within its design limits. It also sets out the safety instructions, hand signals, danger zone definitions, and wind and gradient restrictions that protect the operator, the rigging crew, and the machine.

IMAGES PREVIEW

This Liebherr LR 1300 SX W operating manual is delivered as an instant PDF download after payment. There is no shipping and no waiting for a physical book. The file can be opened on any device, searched on screen, and printed page by page if a paper copy is needed in the cab or the workshop.