Linde H50 H60 H70 H80 Series 396-03 Spare Parts Catalogue 396 801 02 00

Description

Linde H50 H60 H70 H80 Series 396-03 Spare Parts Catalogue – Document 396 801 02 00

This is the full illustrated spare parts catalogue for the Linde H50, H60, H70 and H80 counterbalance forklift range built on the 396-03 platform. Published under document number 396 801 02 00 and dated 28.11.2023, it covers the complete truck from the engine installation through to the mast, the attachments and the special equipment. Every page follows the same clean parts-list format: position number, Linde order number, quantity, part name, superseded number, variant, validity and vehicle applicability – so you can identify exactly the component your truck was built with before you order.

File Details

• Manual type: Illustrated spare parts catalogue (Ersatzteilkatalog)
• Brand: Linde
• Series: 396-03
• Models covered: H50, H60, H70, H80, H80-900, H80-1100
• Document number: 396 801 02 00
• Date: 28.11.2023
• Languages: German, English, French, Italian, Spanish
• Pages: 1321
• File format: PDF

Chapters Covered

The catalogue is divided into major assembly groups, each opening with its own section index and followed by exploded illustrations keyed to the parts tables:

• Motor – engine installation and mounting
• Antrieb Motor – engine intake and air filter (diesel and LPG versions), dust protection pre-filter, oil-bath air filter, engine suspension and pump drive, cooling system (diesel and LPG), radiator core and cooling air screen, fuel system, AdBlue system, exhaust system and silencer, exhaust routing for EU/USA/RoW/LPG, belt drive
• Antrieb: Getriebe – service units and attachments, GR12H-01 and GR12H-02 wheel drives, HMV105-02 hydraulic motor service units, gear housing, drive shaft, cradle and control base, control base mounting and displacement pistons, control base with E6 adjustment, E2 adjustment, brake valve
• Fahrzeugaufbau – frame and counterweight, hood and panelling, front panelling, side panelling, rear panelling, front console, insulation mats, driver’s seat (standard, air-sprung, rotating seat), cab front screen, cab roof screen, cab rear screen, screen wash system, cab mirrors, cab doors, split door, heating and air-conditioning console, air-conditioning accessories for diesel and LPG, radio, drinks holder
• Lenkanlage und Rader – hydrostatic steering with lines, steering axle 1604, solid tyres, pneumatic tyres, front and rear mudguards
• Bedienelemente – pedal actuation, parking brake, control valve actuation, armrest adjustment, tilt angle sensor
• Elektrische Anlage – electrical fittings, central electrics box and controllers, battery and accessories, main cable harness (diesel and LPG, parts 1-3), assorted cable harnesses, work lights, vehicle lighting and hazard warning system, lighting cable harnesses, warning beacon and rotating beacon, truck spot, reversing warning harnesses, wiper harnesses, heating and air-conditioning harnesses, particulate filter harnesses, mast positioning, level indicator harnesses, vehicle data management, LFM online, CDX communication unit, Linde Safety Guard, data terminal, remote data transmission, lift height measuring systems, Linde Safety Pilot (LSP), radar sensor, surround view system, Linde Load Assistant, warning stripe projection
• Hydraulikanlage – control valve and lines, oil tank with lines and accessories, lines and accessories for HPR, lines for travel hydraulics and HPR, oil filter and lines, tilt cylinder, pressure accumulator, pressure accumulator on the overhead guard, pressure cut-off, auxiliary hydraulic hose lines in the vehicle, standard auxiliary hydraulics for mast type 195, triplex auxiliary hydraulics with rail guide, triplex auxiliary hydraulics with hose reel, hose reel for single and double auxiliary hydraulics, pivot joint for single and double auxiliary hydraulics
• Hubgerust – fork carrier and fork tines, standard mast type 195, triplex mast type 195, lift cylinders for standard mast, centre cylinder and outer cylinders for triplex mast
• Sonderausrustung – road traffic equipment, load guard grille, clipboard, sun visor
• Sonstiges – decals and identification plates, joystick decals for single and cross lever, operating fluids, service kits for diesel and LPG, document wallet

Working through this Linde H50 H60 H70 H80 series 396-03 parts catalogue is a different job from reading a repair manual. The value here is identification. Every illustration is a numbered exploded drawing, and each number points straight back to a row in the parts table that tells you the Linde order number, the quantity used in that assembly and, where the part has been superseded, the new number that replaces it. That single detail – the superseded-number column – is what stops you ordering an obsolete component that has already been revised on later builds. The catalogue also records vehicle applicability, so parts that only fit the H80-900 or H80-1100, or only the LPG variant, or only the EU/USA or RoW exhaust routing, are separated rather than lumped together.

Engine parts are catalogued separately

One point is flagged clearly in the opening notes of this document: the engine itself is not detailed here. The catalogue states that information on engine spare parts for series 396 is held in a separate catalogue, and this notice is repeated in German, English, French, Italian and Spanish. Everything bolted around the engine – intake and filtration, suspension and pump drive, cooling, fuel supply, AdBlue, exhaust and aftertreatment – is included in this volume, but the internal engine components are not. Buyers should factor that in before ordering.

What makes this catalogue useful in the workshop

Ordering the wrong part on a 5 to 8 tonne counterbalance truck is expensive in both money and downtime. This PDF removes most of the guesswork. You can trace a leaking hydraulic line back through the vehicle line diagrams to the exact hose assembly and its end fittings. You can find the correct lift cylinder for your specific mast height – the catalogue lists them by hub height, so a 3550 mm H50/H60 mast gets a different cylinder from an 8850 mm one. You can identify which of the two fork carrier variants your truck has, whether it runs four, six or eight support rollers, and which of the interchangeable shim thicknesses is required in the drive unit. The gear and pump sections go as deep as individual shim sizes, O-rings, support rings, pilot pins and sealing kits, which is unusual for a parts catalogue and makes it genuinely usable for rebuilding the GR12H wheel drives and the HMV105-02 hydraulic motor.

Who this Linde 396-03 parts catalogue is written for

This is a working reference for anyone who maintains, repairs or restores Linde H50, H60, H70 or H80 trucks on the 396-03 platform: fleet workshops, independent forklift engineers, service managers building parts lists, and owners of older machines who need to keep them running when dealer support gets difficult. The multilingual format also makes it usable across European operations where the workshop language varies between German, English, French, Italian or Spanish.

Take the guesswork out of ordering Linde parts

With this Linde H50 H60 H70 H80 Series 396-03 spare parts catalogue you can build an accurate parts list for an engine service, a hydraulic hose replacement, a brake valve overhaul, a mast cylinder reseal, a wheel drive rebuild, a seat replacement or a full electrical fault-finding session on the lighting, wiper, heating and safety systems. Correct part numbers mean correct fit, and correct fit means the truck goes back into service instead of back into the workshop. Cross-referencing the position numbers on the exploded views against the tables is the whole method, and it works the same way whether you are ordering one O-ring or rebuilding an entire assembly.

IMAGES PREVIEW

The document is delivered as an instant PDF download – no shipping, no waiting for a disc, no customs delays. Open it on a laptop in the workshop, a tablet on the machine or a phone at the parts counter, and print whichever pages you need for the job in hand. Keep it on file and you have the complete parts breakdown for the 396-03 H50 to H80 range whenever a truck comes in.