Gulfstream Commander Jetprop 840 900 980 1000 Aircraft Systems Training Manual – Volume 2 PDF

Description

Gulfstream Commander Jetprop Aircraft Systems Training Manual – Volume 2

This FlightSafety Commander Jetprop Training Manual Volume 2 is a complete systems training reference for the Gulfstream Commander Jetprop series, covering the 840, 900, 980 and 1000 models. Across 595 pages, it delivers detailed descriptions, operating principles, component locations, controls and indicators, system schematics, and maintenance considerations for every major aircraft system on these Garrett TPE331-powered turboprops. Whether you are transitioning to the Jetprop, preparing for recurrent training, or building systems knowledge for troubleshooting, this manual is the definitive cockpit reference for the Commander Jetprop’s aircraft systems.

File Details

• Manual Type: Aircraft Systems Training Manual (Volume 2)
• Publisher: FlightSafety International, Inc.
• Brand: Gulfstream Commander Jetprop Series
• Covered Models: 840 (690C), 900 (690D), 980 (695), 1000 (695A/695B)
• Engines: Garrett TPE331-5 and TPE331-10 series turboprops
• Language: English
• Page Count: 595
• File Format: PDF

Chapters Covered

• Chapter 1: Aircraft General
• Chapter 2: Electrical Power Systems
• Chapter 3: Lighting
• Chapter 4: Master Warning System
• Chapter 5: Fuel System
• Chapter 6: Auxiliary Power Unit
• Chapter 7: Powerplant
• Chapter 8: Fire Protection
• Chapter 9: Pneumatics
• Chapter 10: Ice and Rain Protection
• Chapter 11: Air Conditioning
• Chapter 12: Pressurization
• Chapter 13: Hydraulic Power Systems
• Chapter 14: Landing Gear and Brakes
• Chapter 15: Flight Controls
• Chapter 16: Avionics
• Chapter 17: Miscellaneous Systems
• Walkaround

Aircraft General

Covers the complete airframe structure including nose section, center fuselage, and aft fuselage, the empennage and wing assemblies, and model-specific structural differences. Cabin door operation is detailed with bayonet rigging, door seal inflation, emergency door release, and retractable step. Baggage compartment configurations and capacities are listed by model. Includes airplane stations, general dimensions, ground handling procedures for towing, taxiing, parking and mooring, jacking instructions, servicing charts, and lubrication charts. Maintenance considerations cover inspections, structural repairs, sealing procedures, and window and windshield replacement.

Electrical Power Systems and Lighting

The DC electrical system is covered in full for both early and late model airplanes. Two 24-volt batteries, engine-driven starter-generators rated at 30 volts and 300 amperes, generator control units, and the complete power distribution network including the single main bus and split main bus configurations. Ground power operation, GPU voltage limits, battery servicing and charging, circuit-breaker panels, and power distribution panel are all detailed. The lighting chapter covers interior lighting including panel lights, floodlights, map lights, and passenger compartment lighting, plus exterior lighting with landing, taxi, position, strobe, anticollision, wing inspection, and logo-recognition lights. Includes dimmer controls, fault analysis, and limitations.

Master Warning System

The annunciator panel for both early and late model airplanes. TEST and DIM switch functions, MASTER WARN light operation, and complete annunciator panel indication tables listing every annunciator, its color, and the cause for illumination. Covers the stall warning system on One Thousand models with angle-of-attack computer, the aural warning systems including gear horn, stall warning, cabin altitude warning, and Mach warning, and the AURAL WARN TEST switch. Includes maintenance considerations for annunciator lamp replacement.

Fuel System

Complete fuel system coverage for standard and long-range configurations. Fuel storage with wet wing and bladder cells, scavenge pump systems on early models and jet pump systems on late models, fuel interconnect valve, shutoff valves, boost pumps, check valves, filters, and flow switches. Fuel quantity indicating system with capacitance probes and low fuel sensors, fuel totalizer, and both early and late model controls and indicators. Refueling and defueling procedures, fuel capacities for standard and long-range systems, fuel balance limits, approved fuels, fuel handling practices, and internal leak detection procedures.

Powerplant

The most extensive chapter of the manual covers the Garrett TPE331 turboprop engines in complete detail. Engine designations and power ratings for all models, major sections including air inlet, compressor, combustor, turbine, exhaust, and reduction gearcase. Operating principles, critical RPM range, oil system with tank, pumps, cooler, filter, and chip detector, fuel system with Woodward fuel control unit, underspeed and overspeed governors, fuel solenoid valve, flow divider, and fuel purging system. Ignition system, propeller control including governing mode, Beta mode, feathering and unfeathering, torque sensing with NTS system, propeller synchrophasing, powerplant controls, instrumentation, engine starting sequence, and engine checks. Includes SRL/autostart computer for -10 engines, torque limiting and temperature limiting systems, and complete operating limits tables.

Fire Protection and Pneumatics

Engine fire detection using thermal switches forward and aft of the firewall, aft fuselage high-temperature switches, and portable fire extinguisher locations. The pneumatics chapter covers the engine bleed air system, bleed air shutoff and check valves, controls and indicators, the bleed air leak detection system with sensor locations, and the regulated air system for deice boots, door seal, and gyro pressure. Includes functional checks, fault analysis, and limitations.

Ice and Rain Protection

Deicing systems including wing and empennage pneumatic boots, propeller deicing with electrically heated boots, and the associated timers and ammeter/loadmeter. Anti-icing systems for generator inlets, rudder slot, pitot-static, stall warning, windshields, and engine inlets. Miscellaneous equipment includes wing ice inspection lights, defog systems for early and late models, and windshield wipers. Covers system limitations, functional checks, and fault analysis.

Air Conditioning and Pressurization

The environmental control unit (ECU) with precooler, dual pressure regulator, dual core heat exchanger, anti-ice control valve, pneumatic temperature sensor, and air cycle machine. System controls for early and late models, cabin temperature controller, temperature control valve, and the ENVIRO environmental system with mass flow control, temperature control, and the Freon air conditioning system. The pressurization chapter covers the cabin pressure controller, outflow-safety valves, vacuum pump, cabin altitude and differential pressure gage, cabin rate-of-climb indicator, CABIN ALT annunciator, emergency depressurization, ram-air system, and the emergency pressurization system on late models.

Hydraulic Power Systems

Primary and auxiliary hydraulic systems for early and late model airplanes. Hydraulic pressure distribution, engine-driven primary pumps, electrically driven auxiliary pump with pressure switch, accumulator-regulator with nitrogen precharge, reservoir assembly with standpipe, shutoff valves, and pressure gage. Includes complete hydraulic system diagrams for pre-1983 and 1983 aircraft, system maintenance considerations, functional checks, and troubleshooting.

Landing Gear and Brakes

Complete landing gear system including main and nose gear assemblies, retraction and extension sequences, hydraulic-pneumatic actuators, nitrogen storage bottle, uplocks, downlock switches, in-transit switches, door actuation and sequencing with priority valves, and emergency extension. Brake systems for early and late models with Goodyear and Cleveland brake assemblies, power brake valve, parking brake valve, and brake wear measurement. Nosewheel steering systems for early models with hydraulic cylinder and late models with electro-hydraulic servo. Includes maintenance considerations, functional checks, and limitations.

Flight Controls

Ailerons, elevators, rudder, and wing flaps with their control systems, trim tabs, and rigging procedures. Stall warning system with lift detector switch and computer. Control column assemblies, cable routing, turnbuckle adjustment, control surface balancing, and trim tab free play measurement. Flap control and indication for early and late models with hydraulic actuation. Includes control surface travel measurement points, cable rigging procedures, functional checks, and fault analysis.

Avionics

Collins AP-106/FD 112V autopilot and flight director system, King KFC flight control system, audio control panels, pitot-static systems for pilot and copilot, air-driven gyro for the copilot’s attitude indicator, and the stall warning system. Covers mode control panels, annunciators, flight command indicator, pictorial navigation indicator, vertical navigation computer, and system operation. Includes maintenance considerations and fault analysis.

Miscellaneous Systems

Oxygen systems for early and late model airplanes with storage cylinder, regulator, crew masks, passenger masks, and distribution systems. Covers system operation, oxygen duration tables, time of consciousness vs altitude, servicing procedures, and maintenance considerations. Also includes the optional baggage compartment heater and med-evac configurations.

Walkaround and Appendices

A complete pictorial walkaround section covering every item in the exterior power-off preflight inspection, with photographs showing each check point around the airplane. Appendices include conversion tables for temperature, inches to millimeters, and weight conversions, answers to chapter questions, and aircraft specifications and performance data for all four models.

What This Manual Enables You to Do

This is not a generic overview. It is a system-by-system training manual written for pilots and maintenance personnel who need to understand how the Commander Jetprop’s systems actually work. Every major system is broken down into its components, operating principles, controls, indicators, and limitations. You get the full picture of the electrical distribution, fuel management, powerplant operation with the TPE331, hydraulic and landing gear systems, pressurization and environmental control, ice protection, flight controls, avionics, and oxygen systems.

For pilots, this manual supports transition training and recurrent training by providing the systems knowledge needed to operate the aircraft safely and to recognize abnormal conditions before they become emergencies. For maintenance personnel and owners, it provides the component locations, system schematics, and operational descriptions that make troubleshooting and repair more efficient.

The manual covers model-specific differences throughout, so you are not left guessing whether a particular procedure or component applies to your 840, 900, 980, or 1000. Serial number ranges are called out where systems changed between early and late production.

This training manual is intended for familiarization and training purposes. It is based on information obtained from the aircraft manufacturer’s Pilot Manuals and Maintenance Manuals. In the event of conflict between data in this manual and publications issued by the manufacturer or the FAA, the manufacturer or FAA shall take precedence.

IMAGES PREVIEW

Instant PDF Delivery

This FlightSafety Commander Jetprop Training Manual Volume 2 is delivered as an instant PDF download. No shipping, no waiting. The file is printable and can be viewed on any device – laptop, tablet, or smartphone. Whether you need it in the hangar, the cockpit, or the classroom, you have the complete 595-page reference available immediately after purchase.