Linde E35 E40 E45 E50 Forklift Parts Catalogue 2016 – Complete Spare Parts List PDF

Description

Linde E35 E40 E45 E50 Parts Catalogue – 2016 Edition

This is the complete Linde E35, E40, E45 and E50 forklift truck spare parts list, published under document number 388-01 E35/40/45/50 388 801 00 00 and dated 11.10.2016. It covers the full range of assemblies fitted to these 4-wheel electric counterbalance trucks, with exploded-view illustrations, figure references, genuine part numbers, quantities and descriptions for every component shown. Whether you are rebuilding a mast, resealing a brake valve or tracking down a single sensor, this catalogue gives you the exact part number and its location in the assembly.

File Details

• Manual type: Parts Catalogue / Spare Parts List
• Brand: Linde
• Models covered: E35, E40, E45, E50 (including H-600, HL-600, L-600, HL and L variants)
• Document number: 388-01 E35/40/45/50 388 801 00 00
• Date: 11.10.2016
• Language: English, German, French, Italian, Spanish
• Page count: 735
• File format: PDF

Chapters Covered

• Motor Unit
• Axle Drive
• Overhead Guard
• Chassis and Counterweight
• Battery Cover and Battery Carrier
• Driver’s Cab, Doors and Panelling
• Driver Seat
• Pedal Operation
• Brake Valve
• Actuator of Pilot Valve
• Armrest Harness
• Tilt Angle Sensor
• Electric Armatures
• Power Modules and Battery Accessories
• Battery Plug
• Traction and Lift Electronic
• Main Harness Parts
• Various Cable Looms
• Working Light
• Truck Lighting and Warning Blinker System
• Wiring Harnesses
• Flash Light / Warning Lights / Danger Signal / Blue Spot
• Control Valve and Lines
• Control Block VW10-M3 (BR 388)
• Control Block VW10-M4 (BR 388)
• Hydraulic Pump, Oil Tank, Filter and Lines
• Pump Aggregat
• Electric Motor
• Tilt Cylinder
• Additional Hydraulics Hose Lines
• Auxiliary Hydraulic Services
• Fork Carriage and Fork Arms
• Standard Mast Type 1516
• Triplex Mast Type 1516
• Lift Cylinder for Standard Mast
• Middle Cylinder for Triplex Mast
• External Cylinder for Triplex Mast
• Sideshift
• Linde Load Assistant
• Highway Equipment
• Load Backrest
• Tilt Cylinder Protection
• Overhead Guard Grille
• Terminal Board
• Sun Blinds
• Hydraulic Battery Reach
• Plates and Decals
• Operating Material
• Bag for Technical Documentation

Motor Unit and Axle Drive

The motor unit section breaks down the complete drive motor assembly, including armature, stator, bearings, seals, terminal strip and temperature sensors. The axle drive chapters cover both the GR6E-20 and GR6E-21 gearboxes in full detail: wheel shafts, tapered roller bearings, planet gear carriers, brake pistons, discs, quad rings, sun gear shafts, locking rings and housing assemblies. Every exploded view is keyed to a parts table with figure numbers, Linde part numbers, quantities and descriptions, so you can identify exactly which bearing, seal or gear you need before ordering.

Overhead Guard, Chassis and Counterweight

This group covers the overhead guard assemblies for all cab variants, the chassis frame, step plates, counterweights, ballast weights and associated mounting hardware. You get the full breakdown of bolts, washers, joining plates and spring elements used to mount these structural components. The battery cover chapter details the cover assembly, bearing blocks, gas springs, locks and bushes for both standard and raised driver’s seat versions.

Driver’s Cab, Doors, Panelling and Seats

The cab section is extensive. It covers the door assemblies (left and right, for all model variants), door windows, sliding windows, rear windows, roof panels, roof windows, panelling, side panels, rubber profiles, hinges, gas springs, locks, handles and sealing profiles. Separate chapters address the driver’s seat in Standard, Comfort, Super Comfort and Super Comfort Active versions, including upholstery options, seat belts, armrests, shock absorbers and seat guides. The floorplate, pedal operation and mounting hardware are also included.

Pedal Operation, Brake Valve and Pilot Valve Actuator

This chapter covers the accelerator and brake pedal assemblies, bearings, springs, potentiometers, pinion gears and mounting brackets for both single and dual pedal configurations. The brake valve section details the valve itself, solenoid coils, solenoid valves and seal sets. The pilot valve actuator chapter covers joystick levers (central, cross and single lever), bellows, handles, consoles and the potentiometer assemblies that translate lever movement into hydraulic control signals. The tilt angle sensor and its associated gears, potentiometers and linkage are also documented.

Electric Equipment, Armatures and Wiring

The electrical section is one of the largest in the catalogue. It covers the electric armatures and consoles, display units, push-buttons, key switches, relays, fuses, fuse links, flasher units, horn, working lights, rear lights, warning lights, rotating beacons and Blue Spot headlights. The main harness parts are broken down by production period (before and after 02/2014, and after 03/2014), with every connector housing, contact, seal and cable shoe listed. Wiring harnesses for the windscreen wiper, heater, voltage converter, LFM (Linde Forklift Data Management), LFM Online, 12V socket, battery charger, lift mast positioning, battery reach, height indicator, LSP (Linde Safety Pilot), data terminal, radar sensor and data transmission are all covered with their respective part numbers.

Power Modules and Battery Accessories

This chapter documents the emergency off switches, circuit breakers, battery male and female connectors (MRC 320A and SBE 320A), electric cables, output modules, contactor boards, voltage transformers, fuse boxes and terminal boards. The battery plug section (Schaltbau) covers socket housings, pin housings, sliders, coding pins, clips, contacts and adaptors. Charger battery components including the charger assembly, fan, covers, cables, sensors and pump are also listed.

Hydraulic Unit – Pumps, Tanks, Filters and Lines

The hydraulic section covers the gear pump, flange, valve, oil tank assembly, filter housing, filter inserts, oil dipstick, accumulator, oil cooler, fan and all associated hoses and lines. The pump aggregat chapter details the pump-motor unit, pump motor, contactor, valve cartridge, solenoid coil, oil tank and breather filter. The control block chapters for VW10-M3 and VW10-M4 provide exploded views and parts lists for the complete valve blocks, including O-rings, solenoid coils, magnets, threaded pins, self-locking nuts, screw plugs and valve block assemblies.

Tilt Cylinder, Lift Cylinders and Mast Components

The tilt cylinder chapter covers the complete cylinder assembly, cylinder pipes, piston rods, pistons, cylinder heads, seal kits, guide rings, wiper rings, eye bolts, spring elements and clamping pieces. For the mast, the catalogue separates Standard Mast Type 1516 and Triplex Mast Type 1516, each with outer, inner and middle mast assemblies listed by lift height. Lift cylinders for standard masts, middle cylinders for triplex masts and external cylinders for triplex masts are all itemised with their respective part numbers by stroke length and model variant. The fork carriage and fork arms chapter covers standard and triplex carriages in 6-roller and 8-roller configurations, along with fork arms in various lengths, widths and finishes (standard, non-rusting, brass-coated).

Sideshift, Linde Load Assistant and Special Equipment

The sideshift chapter covers the complete side shift assembly for both standard and triplex masts, including beam supports, fork carriages, wear strips (plastic and bronze), bolts, locking rings, wiper rings, bushes, grooved rings, O-rings, support rollers and lubricating nipples. The Linde Load Assistant section documents the sensor lift height, supports and mounting hardware for both Standard and Triplex mast versions. Special equipment chapters cover highway equipment (wheel chock, warning triangle, rotating beacon, warning strip), load backrest, tilt cylinder protection, overhead guard grille, terminal board (clipboard assembly, light, supports), sun blinds, battery carrier and battery removal tool, and the hydraulic battery reach (rails, reach cylinder, valve block, supports, covers, hose lines and sensors).

Plates, Decals and Operating Material

The plates chapter lists all labels, decals, name plates, warning strips and adhesive foils used across the E35, E40, E45 and E50 models, including lifting capacity labels, restriction symbols, tilting danger warnings, StVZO labels and joystick function labels for both single lever and cross lever controls. The operating material chapter covers spray cans (RAL2002 and RAL7021), chain spray, lubricating grease and cold store specification lubricants. The bag for technical documentation chapter covers the document bag and mounting hardware.

Why This Parts Catalogue Matters

Ordering the wrong part for a Linde E35, E40, E45 or E50 is expensive and time-consuming. This catalogue removes the guesswork. Every part number in this 735-page document is tied to a specific exploded-view illustration, so you can visually confirm the component you need before you place an order. The quantities listed for each figure tell you exactly how many of each item are required per assembly, which is essential when you are replacing bearings, seals, O-rings, bolts or washers during a rebuild. The catalogue also captures part number supersessions and phased-out references where applicable, helping you avoid obsolete numbers and find the current replacement.

For workshops maintaining mixed fleets of Linde E35, E40, E45 and E50 trucks, this catalogue covers all the common variants – including the H-600, HL-600, L-600, HL and L designations – so you do not need multiple catalogues for different truck configurations. The electrical section alone is invaluable for diagnosing and repairing wiring faults, with every connector, contact, seal, relay and fuse identified by part number and location. The hydraulic section gives you the full breakdown of pumps, valves, cylinders, hoses and fittings, which is critical when tracing leaks or rebuilding control blocks.

This is not a generic parts list. It is the same document Linde service departments use to identify and order components for these trucks. Having it on hand means you can quote accurate part numbers to your supplier, verify that the part you receive matches the illustration, and complete repairs correctly the first time. It is equally useful for fleet managers building a spares inventory, independent workshops servicing Linde electric forklifts, and owners who want to understand exactly what is fitted to their machine.

IMAGES PREVIEW

Instant PDF Delivery – No Shipping, No Waiting

This Linde E35 E40 E45 E50 Parts Catalogue is delivered as an instant PDF download. There is no physical book to ship, no waiting for delivery, and no customs delays. As soon as your payment is confirmed, you can download the file and start using it immediately. The PDF works on any device – desktop, laptop, tablet or smartphone – and you can print the pages you need for the workshop, mark them up, or keep the entire 735-page catalogue on a tablet for quick reference at the machine. Whether you are ordering one seal or rebuilding an entire axle drive, this catalogue gives you the part numbers, illustrations and quantities you need to get the job done right.